Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Coupling Type: BAYONET;
Median Price
$19.910
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$14.230
1k+ parts
$13.000
10k+ parts
-
Eastern End Electronics, LLC
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Advanced Electronics
$11.664
$10.614
$9.564
Perfect Parts
BNC Connectors 112558 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
112558 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3020-00-051-6478, 3020000516478, 5905-01-076-9381, 5905010769381, 5998-00-492-6726, 5998004926726
NIIN
000516478, 010769381, 004926726
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Kingwell Technonlogy
Weitronic Enterprise
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
5-1634503-1
TE Connectivity
TE Connectivity's 5-1634503-1 BNC Connector features 50 ohm impedance, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz with a max operating temperature of 85°C. The connector is durable with a shell made of zinc alloy and termination via soldering.
M39012/16-0014
Amphenol
Amphenol's M39012/16-0014 BNC Connector has a body diameter of 0.593", withstands 2100VAC, and operates b/w -65 to 165°C. Ideal for RF applications with RG-142 cable types, it features a characteristic impedance of 50 ohm and durability up to 500 cycles.
31-203
Amphenol 31-203 BNC Connector features panel mount, 0.687" body length, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz with a characteristic impedance of 50 ohm. Offers reliable performance in commercial settings with MIL conformity.
M39012/24-0001
Amphenol's M39012/24-0001 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it is MIL conformant with a bayonet coupling type and polytetrafluoroethylene insulator. Suitable for panel mounting, it has a hermetic option and operates b/w -65 to 165 °C.
1-1478402-0
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
51K204-400A5
Rosenberger Hochfrequenztechnik & Kg
51K204-400A5 by Rosenberger is a BNC Connector with 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and BAYONET Coupling Type. Ideal for RF applications up to 10 GHz, featuring POLYTETRAFLUOROETHYLENE insulator and 50 ohm impedance for high-frequency performance.
MP-13-10-1RG179
SPC TECHNOLOGY/ MULTICOMP
RF BNC CONNECTOR;
031-203-RFX
Amphenol's 031-203-RFX BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it offers bayonet coupling and PTFE insulator for reliable performance in cable and panel mounting setups.
73171-2741
Molex
Molex 73171-2741 is a RF BNC CONNECTOR with 75Ω impedance, ideal for BOARD mounting. Featuring SURFACE MOUNT termination, it has a JACK body style and RIGHT ANGLE mounting. This COAX contact connector with LOCKING option is reliable for COMMERCIAL applications.
112512
The Amphenol 112512 is a BNC connector with a body diameter of 0.571" and dielectric voltage of 1700VAC. It features gold termination, operates b/w -65 to 165°C, and has a characteristic impedance of 50 ohm. Ideal for RF applications up to 4GHz, it uses RG-316/U cable type with male contact gender in commercial settings.
208101-8
TE Connectivity's 208101-8 is a BNC connector with bayonet coupling, male contact gender, and panel mounting. It has a mains connector rating of 115/230VAC. Ideal for RF applications requiring a straight mounting style with #4-40 UNC 2B screw option.
7232
Pomona Electronics
Pomona Electronics 7232 BNC Connector features gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 3 GHz frequency, and male crimp termination on cables.
CPMC-78-18
Vertiv
Vertiv's CPMC-78-18 BNC Connector features gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications with 75 ohm impedance, male contact gender, and plug body style. Supports up to 2 GHz operating frequency for cable mounting in crimp/solder termination.
R141.009.000
Radiall S A
R141.009.000 BNC Connector by Radiall S A is a male plug with a 50 ohm characteristic impedance, suitable for RG-141 cables. It has an insulation resistance of 5GΩ, insertion loss of 0.23 dB, and can withstand voltages up to 1500VAC. This connector is commonly used in RF applications up to 4 GHz.
5227161-9
TE Connectivity's 5227161-9 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with a max operating frequency of 4GHz, this connector has a durable zinc alloy shell, black insulator color, and female contact gender.
6274360-1
TE Connectivity's 6274360-1 BNC Connector features a 0.365" body diameter, PTFE insulator, and 5000000000 ohm insulation resistance. Ideal for RF applications with a characteristic impedance of 75 ohm, it operates b/w -55 to 85 °C and can withstand up to 4 GHz frequency.
5225395-6
TE Connectivity's 5225395-6 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for applications requiring MIL conformity, it is a bayonet-coupled plug with fluoropolymer insulator for temperatures ranging from -55 to 85°C. Suitable for RG 142B/A cables in various setups.
MP-13-15-1TSSRG179U
R141.007.161
Radiall S A's R141.007.161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance for up to 4 GHz applications. With gold over nickel termination, bayonet coupling, and PTFE insulator, it is ideal for RF connections in various industries requiring reliable signal transmission.
B6551A1-NT3G-50
Amphenol B6551A1-NT3G-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and PTFE insulator. Ideal for panel mounting applications requiring solder termination, featuring female contact gender and jack body style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved