Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
R141254000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 5 GHz, featuring GOLD OVER NICKEL Termination Contact Finish and POLYTETRAFLUOROETHYLENE Insulator Material for reliable performance in cable and panel mounting setups.
Median Price
$14.930
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$12.040
1k+ parts
$11.150
10k+ parts
-
Element14
$19.820
$18.230
$17.830
TTI Europe
$14.848
$13.982
DF Sales Co.
$14.000
Nova Conductors
$14.430
Vyrian
LWI Electronics Inc
Corohmni
$2.065
AZTECH Wire
$18.896
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Perfect Parts
Panel mount capability allows for easy installation and secure attachment to equipment or devices.
Low insertion loss ensures efficient signal transmission with minimal loss of quality.
Gold over nickel finish provides excellent conductivity and corrosion resistance for reliable connections.
Bayonet coupling type offers quick and secure connection for easy installation and removal.
Polytetrafluoroethylene insulator material ensures high insulation resistance and stable performance in various environments.
RF BNC connector is widely used in telecommunications and electronics for its versatility and compatibility.
Low VSWR indicates efficient power transfer and minimal signal reflection for reliable signal integrity.
Flexible mounting options for both cable and panel installations accommodate different system configurations.
Standard characteristic impedance of 50 ohm ensures proper matching with other components for optimal signal transfer.
Clamp termination type allows for secure attachment of cables and ensures stable connections without signal loss.
Female contact gender is commonly used for connections with male contacts, providing compatibility with a wide range of devices.
Jack body style offers a secure and robust housing for the connector, ensuring durability and long-lasting performance.
Straight mounting style provides a simple and direct connection path for efficient signal transmission.
High maximum operating frequency of 5 GHz supports fast data transmission and is suitable for high-frequency applications.
BNC Connectors R141254000 attributes and parameters. Explore more BNC Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
R141254000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Nte Electronics
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
31-5431
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: RECEPTACLE; Filter Feature: NO; DIN Conformance: NO;
73171-0700
Molex
The Molex 73171-0700 RF BNC Connector features a body length of 0.577", insertion loss of 0.12 dB, and dielectric voltage withstand of 2100VAC. Ideal for applications requiring a durable right-angle receptacle with 75 ohm impedance, such as commercial-grade RF connections up to 4 GHz frequency.
031-203-RFX
Amphenol
Amphenol's 031-203-RFX BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it offers bayonet coupling and PTFE insulator for reliable performance in cable and panel mounting setups.
031-10-RFXG1
Amphenol's 031-10-RFXG1 BNC Connector features Bayonet coupling, Polyamide insulator, and 50 ohm impedance. Ideal for RF applications up to 1 GHz, it supports both cable and panel mounting with solder termination for female contacts.
1-1478064-0
TE Connectivity 1-1478064-0 is a BNC RF connector with bayonet coupling, PTFE insulator, brass contact material, and silver finish. It has 75 ohm impedance, operates up to 2 GHz frequency, suitable for cable termination in RF applications.
B6251C1-NT3G-50
Amphenol B6251C1-NT3G-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and female contact gender. It is used in board mounting applications requiring solder termination for high-quality signal transmission.
112522
Amphenol 112522 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications, it features a brass shell with nickel finish for cable and panel mounting. The female jack connector supports RG-178/U cables with crimp termination in commercial settings.
BNC7T-J-P-GN-ST-EM1D
Samtec
The Samtec BNC7T-J-P-GN-ST-EM1D is a RF BNC connector with gold termination, bayonet coupling, and 75 ohm impedance. Ideal for applications requiring high frequency up to 6 GHz, such as telecommunications and broadcast equipment. Suitable for panel mount installations with surface mount termination.
112132RP
112132RP by Amphenol is a BNC connector with gold termination and bayonet coupling. It features PTFE insulator material, suitable for RF applications. This female crimp connector is ideal for cable mounting in straight configurations.
7233
Pomona Electronics
The Pomona Electronics 7233 BNC Connector features gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 3 GHz frequency, and male contact gender. Suitable for cable mounting with crimp termination for low VSWR of 1.1.
6274127-1
TE Connectivity's 6274127-1 BNC Connector features a 0.436" body depth, POLYMETHYLPENTENE insulator, and 75 ohm impedance. Ideal for RF applications up to 4 GHz with FEMALE contact gender and RIGHT ANGLE mounting style.
5227726-3
TE Connectivity's 5227726-3 BNC Connector features Bayonet coupling, Glass Filled Polybutylene Terephthalate insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with solder termination and nickel finish for panel mounting.
31-70008
Amphenol 31-70008 BNC Connector features gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 1.9 VSWR, and up to 4 GHz frequency. Male crimp termination for cable mounting in straight style plug configuration.
112133
Amphenol 112133 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is used for RF applications with 75 ohm impedance, RG-179/U cable type, and operates up to 1 GHz frequency. Ideal for commercial use due to its reliability and male contact gender.
112253
Amphenol 112253 is a BNC Connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, RG-179 cable compatibility, and female contact gender. Suitable for commercial use in panel or cable mounting configurations.
5227222-3
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
1-1337443-0
TE Connectivity's 1-1337443-0 BNC Connector features Insulation Resistance of 5x10^9 ohm, Insertion Loss of 0.2 dB, and Coupling Type: BAYONET. Ideal for RF applications with a max operating frequency of 2 GHz, it has a characteristic impedance of 75 ohm and is designed for RG-59B/U cable types.
M39012/24-0002
Kings Electronics
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 4 GHz; Manufacturer Series: BNC; Insulator Material: POLYTETRAFLUOROETHYLENE;
31-221
Amphenol 31-221 BNC Connector has 0.2 dB insertion loss, 2100VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with nickel finish, PTFE insulator, and brass shell. Suitable for commercial use in cable and panel mounting with female coax contact.
5227755-2
TE Connectivity's 5227755-2 is a BNC connector with bayonet coupling type and glass filled polybutylene terephthalate insulator material. It has a max operating temperature of 85°C and can handle frequencies up to 4 GHz. This RF connector is commonly used in panel-mounted applications requiring a 50 ohm characteristic impedance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R141.008.000
Radiall S A
R141.008.000 by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.23 dB insertion loss. Ideal for RF applications up to 4 GHz, it features gold over nickel termination contact finish and PTFE insulator material for durability in commercial settings.
R141008000
R141008000 by Radiall S A is a BNC connector with an insertion loss of 0.13 dB and a voltage standing wave ratio of 1.22. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and a 50 ohm characteristic impedance.
R141009000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
R141.009.000
R141.009.000 BNC Connector by Radiall S A is a male plug with a 50 ohm characteristic impedance, suitable for RG-141 cables. It has an insulation resistance of 5GΩ, insertion loss of 0.23 dB, and can withstand voltages up to 1500VAC. This connector is commonly used in RF applications up to 4 GHz.
R141.007.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Maximum Operating Frequency: 4 GHz; Additional Features: APPLICABLE CABLES: RG 58; RG 141;
R141007161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insertion Loss: .13 dB; Insulator Material: POLYTETRAFLUOROETHYLENE;
R141426161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO;
R141.426.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Mounting Style: STRAIGHT;
R141.018.000
R141.018.000 BNC Connector by Radiall S A is a male plug connector with a 50 ohm characteristic impedance and a max operating frequency of 4 GHz. It features a bayonet coupling type, gold termination contact finish with nickel barrier, and is suitable for RF applications requiring low insertion loss (0.23 dB) and high voltage standing wave ratio (1.1).
R141.665.161
R141.665.161 by Radiall S A is a BNC connector with panel mount capability. It has an insertion loss of 0.04 dB and a voltage standing wave ratio of 1.08, making it suitable for RF applications up to 1.5 GHz.
R141018000
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
R141665161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; Mounting Type: BOARD; Total No. of Contacts: 1;
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
R141.007.000
Radiall S A's R141.007.000 BNC Connector features 0.23 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, with gold over nickel termination for male connectors in cable mounting setups.
R141007000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: YES;
R141665200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
R141.665.200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; Insulation Resistance: 5000000000 ohm; Mounting Type: BOARD;
R141308000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Voltage Standing Wave Ratio: 1.22; Filter Feature: NO;
R141.082.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Style: STRAIGHT;
R141075000W
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Voltage Standing Wave Ratio: 1.22; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved