Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Radiall S A's R141.007.161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance for up to 4 GHz applications. With gold over nickel termination, bayonet coupling, and PTFE insulator, it is ideal for RF connections in various industries requiring reliable signal transmission.
Median Price
$6.720
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aranea Global
$6.586
$6.322
Continental Prestige Electronics
AZTECH Wire
$7.880
$7.570
$7.420
$7.270
Argo Parts USA
Low insertion loss ensures minimal signal degradation, making this product suitable for high-frequency applications where signal integrity is crucial.
The gold over nickel finish provides excellent conductivity and corrosion resistance, ensuring a reliable and long-lasting connection.
Bayonet coupling allows for quick and secure connections without the need for additional tools, making this product convenient for use in various applications.
PTFE insulator material offers excellent dielectric properties, providing high insulation resistance and low signal loss, contributing to overall signal quality.
Being an RF BNC connector, this product is designed specifically for radio frequency applications, ensuring optimal performance in RF signal transmission.
A lower VSWR value indicates better impedance match, resulting in less signal reflection and loss, making this product suitable for high-frequency applications.
Designed for cable mounting, this product offers easy installation and compatibility with various cable types, making it versatile for different setups.
With a characteristic impedance of 50 ohms, this product is suitable for use in high-frequency applications that require a consistent impedance match.
The clamp termination type provides a secure and reliable connection, ensuring stable signal transmission and reducing the risk of signal interference or disconnection.
Male contacts are commonly used in RF applications, offering compatibility with various female connectors and providing a reliable connection for signal transmission.
The plug body style allows for easy insertion and removal, making this product convenient for applications where frequent connection and disconnection is required.
The straight mounting style ensures a direct and secure connection, reducing signal loss and interference, making this product ideal for high-frequency applications.
With a maximum operating frequency of 4 GHz, this product is suitable for high-frequency applications, such as in telecommunications, broadcasting, and data transmission.
BNC Connectors R141.007.161 attributes and parameters. Explore more BNC Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
R141.007.161 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Sprague
Silicon Standard
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
2-5329458-1
TE Connectivity
TE Connectivity's 2-5329458-1 BNC Connector features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 2 GHz, it is a panel-mount connector with crimp termination for RG 187, RG 179, and RG 161 cables. Operating temperature ranges from -55°C to 85°C.
R316405000
Radiall S A
R316405000 by Radiall S A is a BNC Connector with Bayonet coupling, 50 ohm impedance, and 2 GHz operating frequency. It features silver termination finish for RF applications. Ideal for panel and cable mounting in high-frequency systems requiring low VSWR.
BNC7T-J-P-HN-RA-BH1
Samtec
The Samtec BNC7T-J-P-HN-RA-BH1 is a RF BNC connector with bayonet coupling, gold contact finish, and 75 ohm impedance. Ideal for applications requiring panel mount connectors with right angle mounting, such as high-frequency signal transmission up to 6 GHz.
UG-89/U
Amphenol
UG-89/U by Amphenol is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it features Bayonet Coupling and PTFE Insulator for hermetic sealing in cable installations.
MP-13-10-1RG174
SPC TECHNOLOGY/ MULTICOMP
RF BNC CONNECTOR;
R316.007.000
Radiall S A's R316.007.000 is a BNC connector with 1.41 dB insertion loss, silver termination contact finish, and bayonet coupling type. It is suitable for RG 58, RG 141, RG 142, and RG 223 cables and has a max operating frequency of 2 GHz.
5227161-1
TE Connectivity's 5227161-1 BNC Connector has a body length of 0.581", insulation resistance of 5G ohm, and operates at temperatures from -55 to 85°C. Ideal for RF applications, this connector features a bayonet coupling type, polymethylpentene insulator material, and a characteristic impedance of 50 ohm.
UCBJE20-1
Bel Fuse
Bel Fuse UCBJE20-1 is a 75 ohm RF BNC connector with nickel finish and brass shell. Featuring a body diameter of 0.4" and depth of 1.003", it operates at up to 4 GHz frequency. Ideal for commercial applications requiring reliable right-angle mounting with locking option for female coax connections.
71K201-400A5
Rosenberger Hochfrequenztechnik & Kg
71K201-400A5 by Rosenberger is a BNC connector with 0.2 dB insertion loss, 5000000000 ohm insulation resistance, and 1.43 VSWR. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type, PTFE insulator material, and brass shell construction. Suitable for commercial use with durability of 500 cycles.
73171-1900
Molex
73171-1900 by Molex is a RF BNC connector with 75 ohm impedance, POLYETHERIMIDE insulator, and NICKEL finish. It is used in commercial applications for board mounting, solder termination, and features a female jack contact style.
KC-19-250
Winchester Interconnect
KC-19-250 by Winchester Interconnect is a BNC Connector with Bayonet coupling, suitable for panel mounting. It features RF BNC connector type with crimp termination and female contact gender. Ideal for applications requiring straight mounting on cable and panel setups.
31-80901
Amphenol 31-80901 BNC Connector features gold-plated contacts, bayonet coupling, and 75 ohm impedance. Ideal for RF applications requiring a male plug with right-angle mounting on cables.
2-331350-1
TE Connectivity's 2-331350-1 BNC Connector features 0.2 dB insertion loss, bayonet coupling, and PTFE insulator. Ideal for RF applications with 50 ohm impedance, it operates b/w -65 to 165 °C and supports cable mounting with crimp termination up to 4 GHz frequency.
031-5540
Amphenol 031-5540 is a BNC connector with 50 ohm impedance, bayonet coupling, and polyphenylene insulator. It has a dielectric voltage of 2100VAC, operates b/w -55 to 85°C, and withstands up to 1 GHz frequency. Ideal for RF applications requiring durable female receptacle connectors with solder termination in commercial settings.
5227699-2
TE Connectivity's 5227699-2 BNC Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and 50 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz, this connector has a GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and ZINC ALLOY shell material.
B6351B1-ND3G-75
The Amphenol B6351B1-ND3G-75 is a RF BNC connector with gold over nickel finish, suitable for panel mount applications. Featuring bayonet coupling and female contact gender, it has a solder termination ideal for straight mounting. The insulator material is acetal, making it durable and reliable in various electronic connections.
M39012/16-0015
Amphenol's M39012/16-0015 BNC Connector features low 0.2 dB insertion loss, MIL conformity, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has bayonet coupling and PTFE insulator for reliable performance in cable installations.
5414460-1
TE Connectivity's 5414460-1 BNC Connector features gold termination, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications with a temperature range of -55 to 85°C, it offers high durability with 500 cycles.
2005
Ddk
RF BNC CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: JACK; MIL Conformity: NO; IEC Conformity: NO; Mounting Style: STRAIGHT;
BJ27
BJ27 by Bel Fuse is a RF BNC connector with 50 ohm impedance, ideal for commercial applications up to 4 GHz. Featuring a nickel finish, brass shell material, and solder termination, it offers reliable performance in panel-mounted setups requiring a female coax contact.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R141.008.000
R141.008.000 by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.23 dB insertion loss. Ideal for RF applications up to 4 GHz, it features gold over nickel termination contact finish and PTFE insulator material for durability in commercial settings.
R141008000
R141008000 by Radiall S A is a BNC connector with an insertion loss of 0.13 dB and a voltage standing wave ratio of 1.22. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and a 50 ohm characteristic impedance.
R141009000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
R141.009.000
R141.009.000 BNC Connector by Radiall S A is a male plug with a 50 ohm characteristic impedance, suitable for RG-141 cables. It has an insulation resistance of 5GΩ, insertion loss of 0.23 dB, and can withstand voltages up to 1500VAC. This connector is commonly used in RF applications up to 4 GHz.
R141007161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insertion Loss: .13 dB; Insulator Material: POLYTETRAFLUOROETHYLENE;
R141426161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO;
R141.426.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Mounting Style: STRAIGHT;
R141.018.000
R141.018.000 BNC Connector by Radiall S A is a male plug connector with a 50 ohm characteristic impedance and a max operating frequency of 4 GHz. It features a bayonet coupling type, gold termination contact finish with nickel barrier, and is suitable for RF applications requiring low insertion loss (0.23 dB) and high voltage standing wave ratio (1.1).
R141.665.161
R141.665.161 by Radiall S A is a BNC connector with panel mount capability. It has an insertion loss of 0.04 dB and a voltage standing wave ratio of 1.08, making it suitable for RF applications up to 1.5 GHz.
R141018000
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
R141665161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; Mounting Type: BOARD; Total No. of Contacts: 1;
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
R141.007.000
Radiall S A's R141.007.000 BNC Connector features 0.23 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, with gold over nickel termination for male connectors in cable mounting setups.
R141007000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: YES;
R141665200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
R141.665.200
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; Insulation Resistance: 5000000000 ohm; Mounting Type: BOARD;
R141308000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Voltage Standing Wave Ratio: 1.22; Filter Feature: NO;
R141.082.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Style: STRAIGHT;
R141075000W
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Voltage Standing Wave Ratio: 1.22; Characteristic Impedance: 50 ohm;
R141007162
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: CLAMP; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved