Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Radiall S A's R142334700 is a BNC Connector with Bayonet coupling, PTFE insulator, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it features panel mount capability and crimp termination for female contacts in straight mounting style.
Median Price
$9.730
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Amar Radio Corporation
Netroflash
$9.243
$9.049
Corohmni
$10.721
Continental Prestige Electronics
$12.490
$9.500
AZTECH Wire
$19.276
Argo Parts USA
Allows for secure and stable installation onto a panel, ensuring a reliable connection.
The bayonet coupling type offers quick and easy connections, ideal for applications that require frequent mating and unmating of connectors.
Provides excellent insulation properties and high temperature resistance, ensuring stable performance in various environments.
Specifically designed for RF applications, ensuring optimal signal transmission and reception.
Low VSWR indicates minimal signal reflection and loss, leading to efficient transmission of signals.
Versatile mounting options allow for flexibility in installation, accommodating different types of setups.
Matches standard impedance requirements for many RF applications, ensuring proper signal transfer without interference.
Crimp termination provides a secure and reliable connection, especially suitable for applications that require frequent assembly and disassembly.
Female connectors are often used for receiving signals, making this BNC connector compatible with various devices and equipment.
Jack-style connectors are commonly used in audio and video applications, providing a secure and stable connection.
Straight mounting style simplifies installation and ensures proper alignment of the connector, reducing signal loss and interference.
Capable of handling high-frequency signals, making this BNC connector suitable for a wide range of RF applications.
BNC Connectors R142334700 attributes and parameters. Explore more BNC Connectors devices from Radiall S A
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
R142334700 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148WS
Changzhou Starsea Electronics
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-T
Rectron
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
73131-5003
Molex
Molex 73131-5003 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications requiring reliable commercial-grade performance at temperatures ranging from -55 to 85°C. Suitable for board and panel mounting with bayonet coupling and solder termination.
M39012/16-0102
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: M39012/16; Mounting Type: CABLE; Mating Contact Finish: GOLD;
031-71052
Amphenol
Amphenol 031-71052 is a BNC connector with panel mount feature. It has a dielectric voltage of 2121VAC, operating temperature range from -40 to 85°C, and impedance of 75 ohm. Ideal for RF applications up to 1GHz, it offers durability of 500 cycles and features right angle mounting style.
751-10-9
Winchester Interconnect
751-10-9 BNC Connector by Winchester Interconnect features 0.12 dB insertion loss, gold over nickel termination, and bayonet coupling. Ideal for RF applications up to 4 GHz, it is a panel mount connector with a 50 ohm impedance and crimp termination. Suitable for cable and panel mounting in various electronic systems.
112405
Amphenol 112405 is a RF BNC connector with gold finish, bayonet coupling, and PTFE insulator. Ideal for board mounting applications requiring 75 ohm impedance. Features female contact gender, solder termination, and jack body style for straight mounting.
330876
TE Connectivity
The TE Connectivity 330876 is a BNC connector with a body diameter of 0.572 inch, PTFE insulator material, and bayonet coupling type. It operates b/w -55 to 85°C, has a characteristic impedance of 50 ohm, and can handle up to 4 GHz frequency. Ideal for RF applications requiring reliable signal transmission in commercial settings.
B1121E1-ND3G-5-50
Amphenol B1121E1-ND3G-5-50 is a RF BNC connector with Bayonet coupling, Acetal insulator, and Crimp termination. Ideal for cable mounting in applications requiring reliable male plug connectors.
15875
The Amphenol 15875 BNC Connector features a 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, this connector has a silver termination finish and PTFE insulator material. With a bayonet coupling type and brass shell material, it offers durability with 500 cycles.
5228980-7
TE Connectivity's 5228980-7 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it supports cable types RG 174, RG 316, and RG 188 with a nickel-finished zinc alloy shell.
112425
Amphenol 112425 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 75 ohm impedance, it features a panel mount design for solder termination in straight mounting style. Perfect for female contact in receptacle body style.
456E-717
The Amphenol 456E-717 is a BNC connector with panel mount and filter feature. It has termination contact finish in TIN, mating contact finish in gold over nickel, and phosphor bronze contact material. Ideal for RF applications requiring female right angle mounting on board or panel.
112405-12
Amphenol's 112405-12 is a BNC connector with bayonet coupling, 0.461" body depth, and PTFE insulator. Ideal for RF applications, it features nickel finish, brass shell, and natural insulator color. Known for its commercial reliability, this jack-style connector offers straight mounting with locking option.
031-10-RFXG1
Amphenol's 031-10-RFXG1 BNC Connector features Bayonet coupling, Polyamide insulator, and 50 ohm impedance. Ideal for RF applications up to 1 GHz, it supports both cable and panel mounting with solder termination for female contacts.
2540
Ddk
2540 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF BNC connector type. It has a VSWR of 1.3, 50 ohm impedance, and male contact gender. Ideal for cable mounting applications requiring a straight plug with clamp termination.
TE Connectivity's M39012/16-0102 RF BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. With bayonet coupling, it is ideal for applications up to 4 GHz requiring MIL conformity and PTFE insulator material.
R141237000
Radiall S A
R141237000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. It features Gold/Nickel termination for RF applications up to 4 GHz, ideal for cable mounting in high-frequency communication systems.
112132RP
112132RP by Amphenol is a BNC connector with gold termination and bayonet coupling. It features PTFE insulator material, suitable for RF applications. This female crimp connector is ideal for cable mounting in straight configurations.
227161-1
TE Connectivity's 227161-1 is a BNC connector with a body length of 0.581 inch, insulation resistance of 5G ohm, and max operating temperature of 85°C. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and glass-filled polybutylene terephthalate insulator material.
4488
Pomona Electronics
The Pomona Electronics 4488 is a BNC connector with gold termination, nickel shell finish, and brass shell material. It has a body diameter of 0.571" and is ideal for RF applications with characteristic impedance of 50 ohm. This male plug connector is designed for RG-55 cable mounting using clamp solder termination.
M39012/16-0101
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R142004000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .2 dB; Contact Material: NOT SPECIFIED; Voltage Standing Wave Ratio: 1.3;
R142.004.000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Panel Mount: NO; No. of Ports: 1;
R142076161
R142076161 BNC Connector by Radiall S A features a body diameter of 0.563", 500M ohm insulation resistance, and 0.2 dB insertion loss. Ideal for RF applications, it has a dielectric voltage of 1000VAC, MIL & IEC conformity, and operates b/w -35 to 70°C.
R142.076.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body or Shell Style: PLUG;
R142.016.000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; Insertion Loss: .2 dB;
R142016000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Body or Shell Style: PLUG; Mounting Type: CABLE;
R142.562.000
Radiall S A's R142.562.000 BNC Connector features low 0.14 dB insertion loss, gold over nickel termination, and 1.3 VSWR for 75 ohm systems up to 1.5 GHz. Ideal for RF applications requiring high-frequency signal transmission with reliable soldered connections in straight mounting configurations.
R142562000
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Insertion Loss: .2 dB; Coupling Type: BAYONET;
R142017000
R142017000 by Radiall S A is a BNC connector with 0.2 dB insertion loss, 1.3 VSWR, and 75 ohm characteristic impedance. It is used for RF applications up to 1.5 GHz, featuring bayonet coupling and clamp termination.
R142.334.700
The Radiall S A R142.334.700 BNC Connector features 0.24 dB insertion loss, 1.08 VSWR, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it is a panel mount connector with bayonet coupling and PTFE insulator suitable for cable and panel mounting in female jack configuration.
R142.016.000W
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; Cable Types: RG-59; Shell Finish: NICKEL;
R142016000W
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT;
R142334161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Ports: 1; Cable Types: RG-59;
R142334162
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Voltage Standing Wave Ratio: 1.05; MIL Conformity: NO;
R142331011
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;
R142331020
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; DIN Conformance: NO;
R142334161W
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.05; Maximum Operating Frequency: 1.5 GHz; Termination Type: CRIMP;
R142.331.027
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Maximum Operating Frequency: 1.5 GHz; Body or Shell Style: JACK;
R142.334.161
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: APPLICABLE CABLES: RG 59, RG 62; CAPTIVE CENTER CONTACT; INSERTION LOSS MAX AT 1 GHZ; Mating Contact Finish: NOT SPECIFIED;
R142.331.011
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .14 dB; JESD-609 Code: e4; Coupling Type: BAYONET;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved