Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 112515 is an RF BNC connector with bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting applications, featuring solder termination and female contact gender in a straight jack style.
Median Price
$3.328
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.213
100+ parts
$1.897
1k+ parts
$1.783
10k+ parts
Interstate Connecting
$3.296
$2.871
$2.580
-
PEI Genesis
$3.360
$3.090
DigiKey
$3.770
$2.721
$2.365
$2.303
Powell Electronics
$3.870
$3.440
Mouser Electronics
$4.290
$3.100
$2.630
$2.470
Newark
$5.980
$4.740
$3.600
Chip1Stop
$2.950
Arrow
$2.498
$2.277
$2.144
TTI
$2.730
$2.290
$2.110
Master Electronics
$2.690
$2.250
$2.140
Verical
$4.977
Electro Sonic
$2.719
$2.451
$2.328
TestEquity
$3.710
TME
$4.100
$3.230
IBS Electronics
$6.077
$4.315
$4.019
Nova Conductors
Semtec, LLC
American Connector Supply Corp
Electronics Depot
Prism Electronics
Continental Prestige Electronics
$2.960
$2.280
$2.120
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Argo Parts USA
Authorized Procurement Solutions
Netroflash
Perfect Parts
Bayonet coupling allows for quick and reliable connection, making it easy to connect and disconnect the BNC connector from the socket without needing additional tools.
PTFE insulator material provides excellent electrical insulation properties, helping to maintain signal integrity and reduce signal loss in the connector.
RF BNC connector is designed for high frequency applications, ensuring low signal distortion and reliable transmission of RF signals.
Board mounting type allows for secure attachment of the BNC connector onto a circuit board, ensuring stability and reliability in electronic systems.
50 ohm characteristic impedance matches with standard coaxial cables and equipment, ensuring efficient signal transmission and compatibility with various devices.
Solder termination provides a strong and durable connection between the BNC connector and the cable, ensuring reliable signal conductivity and minimizing signal loss.
Female contact gender allows for easy connection with male BNC connectors, providing versatility and compatibility with a wide range of devices and applications.
Jack body style offers a secure and reliable connection, preventing accidental disconnection and ensuring stable signal transmission in demanding environments.
Straight mounting style allows for easy installation and alignment of the BNC connector without any bends or twists in the cable, ensuring smooth signal transmission and signal integrity.
BNC Connectors 112515 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
112515 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2995-00-819-3104, 2995008193104, 3040-01-643-4916, 3040016434916, 5130-01-030-2171, 5130010302171, 5305-00-093-7277, 5305000937277, 5305-01-109-2652, 5305011092652, 5310-01-461-8468, 5310014618468, 5315-14-259-6443, 5315142596443, 5315-14-340-4230, 5315143404230, 5998-01-332-0963, 5998013320963, 6520-33-003-9308, 6520330039308, 6630-00-279-5579, 6630002795579
NIIN
008193104, 016434916, 010302171, 000937277, 011092652, 014618468, 142596443, 143404230, 013320963, 330039308, 002795579
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
American Power Devices
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Hi-tron Semiconductor
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
UCBBJE20-1
Bel Fuse
UCBBJE20-1 by Bel Fuse is a 75 ohm RF BNC connector with nickel finish. It operates at up to 4 GHz frequency, ideal for commercial applications requiring reliable surface mount connections. Featuring a female contact gender and brass shell material, it offers secure locking mounting on boards.
31-5431
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: RECEPTACLE; Filter Feature: NO; DIN Conformance: NO;
M39012/17-0101
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; MIL Conformity: YES; IEC Conformity: NO;
B6251C1-NT3G-50
Amphenol B6251C1-NT3G-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and female contact gender. It is used in board mounting applications requiring solder termination for high-quality signal transmission.
112116
Amphenol 112116 is a BNC connector with gold termination contact finish, acetal insulator material, and nickel shell finish. It is used for RF applications with a characteristic impedance of 50 ohm and can operate at temperatures ranging from -40 to 85°C.
31-70261
Amphenol 31-70261 is a BNC connector with gold termination, bayonet coupling, and male contact gender. It is used for RF applications requiring crimp solder termination on cable mounts.
6-1337543-0
TE Connectivity
TE Connectivity 6-1337543-0 is a BNC Connector with gold finish, bayonet coupling, and polyethylene insulator. Ideal for RF applications up to 4 GHz, it features a 50 ohm impedance and solder termination. Suitable for board and panel mounting, this female connector has a right-angle style socket design.
31-4427
Amphenol 31-4427 BNC Connector with 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications in commercial settings due to its PTFE insulator, brass shell, and crimp termination for durability and reliability.
112803
Amphenol 112803 is a BNC connector with gold termination, PTFE insulator, and nickel shell. It has a VSWR of 1.15, impedance of 75 ohm, and operates up to 3 GHz. Ideal for RF applications requiring reliable commercial-grade connectors with straight mounting and locking option.
UG-89/U
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Additional Features: APPLICABLE CABLES: RG-55/U; RG-58/U, VSWR MAX AT 2GHZ; Manufacturer Series: BNC;
31-5637
RF BNC CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; Mounting Type: BOARD AND PANEL;
1-1634612-0
TE Connectivity's 1-1634612-0 BNC Connector features panel mount, bayonet coupling, and polyethylene insulator. With a characteristic impedance of 50 ohm and max operating frequency of 4 GHz, it is ideal for RF applications requiring durable connections in commercial settings.
330876
The TE Connectivity 330876 is a BNC connector with a body diameter of 0.572 inch, PTFE insulator material, and bayonet coupling type. It operates b/w -55 to 85°C, has a characteristic impedance of 50 ohm, and can handle up to 4 GHz frequency. Ideal for RF applications requiring reliable signal transmission in commercial settings.
M39012/16-0013
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Filter Feature: NO; Termination Contact Finish: GOLD;
M39012/20-0101
Winchester Interconnect
Winchester Interconnect's M39012/20-0101 BNC Connector features 0.3 dB insertion loss, gold termination contact finish, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupling connector with PTFE insulator is MIL compliant. It has a VSWR of 1.35 and uses clamp solder termination on cables.
Amphenol Communications Solutions
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012, APPLICABLE CABLES: RG-55/U; RG-58/U; MIL Conformity: YES; Filter Feature: NO;
5227161-6
TE Connectivity's 5227161-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm, operates up to 4GHz, and offers durability with 500 cycles.
R142.562.000
Radiall S A
Radiall S A's R142.562.000 BNC Connector features low 0.14 dB insertion loss, gold over nickel termination, and 1.3 VSWR for 75 ohm systems up to 1.5 GHz. Ideal for RF applications requiring high-frequency signal transmission with reliable soldered connections in straight mounting configurations.
034-1026-12G
RF BNC CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2-5329452-2
TE Connectivity's 2-5329452-2 BNC Connector features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with MIL conformity, operating from -55°C to 85°C. Suitable for crimp termination on cables with a female jack body style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
112533
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; MIL Conformity: NO;
112588
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; MIL Conformity: NO; Mounting Type: CABLE;
112581
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Termination Contact Finish: GOLD;
112589
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; IEC Conformity: NO; Mating Contact Finish: GOLD;
112586
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Body or Shell Style: JACK; Mating Contact Finish: GOLD;
112515-75
Amphenol's 112515-75 is a BNC connector with 0.453" body diameter and 0.788" depth, featuring PTFE insulator and nickel shell finish. Ideal for RF applications with 75 ohm impedance, this jack-style connector mounts on boards via solder termination, ensuring reliable commercial performance.
112538
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: 112538; Coupling Type: BAYONET;
112514
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; IEC Conformity: NO; Termination Type: CRIMP;
112554
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; DIN Conformance: NO;
112580
Amphenol 112580 is a BNC RF connector with gold-plated contacts for female termination. It features bayonet coupling, PTFE insulator, and panel mount capability. Ideal for cable and panel mounting in RF applications requiring reliable signal transmission.
112508
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 75 ohm; IEC Conformity: NO; Termination Type: CRIMP;
112512
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1700VAC; Insulator Material: ACETAL;
112522
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Coupling Type: BAYONET;
112516
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
112596
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Coupling Type: BAYONET; Mating Contact Finish: NOT SPECIFIED;
112559
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: NATURAL; Mounting Option-1: LOCKING;
112587
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Filter Feature: NO; Termination Type: CRIMP;
112511
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Termination Type: SOLDER; Mounting Style: STRAIGHT;
112514RP
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Coupling Type: BAYONET; Body or Shell Style: PLUG;
112519
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved