Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
Median Price
$10.100
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$3.505
100+ parts
-
1k+ parts
10k+ parts
Verical
$9.750
Interstate Connecting
$10.745
$9.007
Heilind Electronics
$11.556
$9.422
Mouser Electronics
$11.940
$9.410
$8.560
Chip1Stop
$2.790
TTI Europe
Farnell
$8.170
Master Electronics
$10.170
$9.780
$6.790
Newark
Powell Electronics
$4.890
$4.630
Vyrian
Digiode
$3.330
Sensible Micro Corp
ComSIT Distribution GmbH
IBS Electronics
$9.776
TME
$8.650
NAC Semi
$13.390
Corphita
$3.154
Andel Nordic
$7.821
$7.509
Telecom & Datacom Connectors 477450200 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Termination Contact Finish:
477450200 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - 0477450y00 Tool Duplication 05/Aug/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Wuxi Xuyang Electronic
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
2-1734035-2
TE Connectivity
TE Connectivity 2-1734035-2 is a USB connector with GLASS FILLED POLYAMIDE9T insulator, NICKEL finish, and PHOSPHOR BRONZE shell. It has 5 contacts, rated for 1A signal current, and UL94V-0 flammability code. Ideal for board mounting in telecom/datacom applications due to its durability of 5000 cycles.
2007562-6
TE Connectivity 2007562-6 is a Telecom & Datacom Connector with 12 ports, 240 contacts, and -55 to 105°C operating temperature range. It features press-fit termination, UL94V-0 flammability rating, and is suitable for board mounting applications in telecom and datacom systems.
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
1345
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Additional Features: MAX CONTACTS (SERIES)=45; Body or Shell Style: PLUG; Mixed Contacts: NO;
CX60-24S-UNIT
USB CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
53462-0629
Molex
53462-0629 by Molex is a Telecom & Datacom Connector with 0.531" body length, 100M ohm insulation resistance, and 125VAC dielectric voltage. Ideal for board mounting in telecom/datacom applications due to its matte tin finish, glass-filled polyamide insulator, and right-angle mounting style.
RJCSE-5380-01
Amphenol Communications Solutions
RJCSE-5380-01 by Amphenol is a telecom and datacom connector with a body size of 0.64" x 0.53" x 0.615". It has 8 contacts, a 50u plating thickness, and is made of stainless steel. This right angle jack connector is suitable for surface mount applications in the telecommunications and data communications industry.
AJP92A8813
Metz Connect Usa
AJP92A8813 by Metz Connect Usa is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and UL 94V-0 flammability rating. It is a male plug connector for board mounting with solder termination, suitable for telecom and datacom applications.
2301995-3
TE Connectivity's 2301995-3 is a Telecom & Datacom Connector with EMI shielding. Featuring LCP insulator, it has 8 contacts and operates b/w -40 to 85°C. Ideal for board mounting applications due to its BOARD LOCK option.
RJHSE-5380-A8
TELECOM AND DATACOM CONNECTOR;
10033526-N3212LF
10033526-N3212LF by Amphenol is a USB connector with 5 contacts, rated at 1A signal current. It features matte tin termination finish, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for telecom & datacom applications requiring a durable, right-angle board mounting option with a surface mount termination type.
2-406549-1
TE Connectivity 2-406549-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. Features include insulation resistance of 500MΩ, operating temp range -40 to +85°C, and durability of 750 cycles. Ideal for telecom/datacom applications requiring reliable signal transmission in harsh environments.
UJ31-CH-G1-SMT-TR
Cui
UJ31-CH-G1-SMT-TR by Cui is a USB connector with 24 contacts, gold termination finish, and polyamide insulator material. It is ideal for telecom & datacom applications, featuring a dielectric voltage of 100VAC and operating temperatures ranging from -25 to 85°C. With a durable design lasting up to 10,000 cycles, this right-angle receptacle offers reliable performance in board mounting configurations.
67298-3090
The Molex 67298-3090 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator and tin plating. It has 8 contacts, right-angle mounting, solder termination, and is suitable for telecom/datacom applications. The connector is UL94V-0 rated, with a stainless steel shell and locking mounting option.
SS60000-009G
Bel Fuse
Bel Fuse SS60000-009G is a Telecom & Datacom Connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and 8 FEMALE contacts. It features SPLIT BOARD LOCK mounting option for 2 PCB rows spaced at 2.03mm. Ideal for applications requiring TELCOM, MODULAR connectors in RIGHT ANGLE mounting style with POLARIZED HOUSING and COPPER ALLOY shell material.
87583-2010BLF
87583-2010BLF by Amphenol is a Telecom & Datacom Connector with 4 contacts, Tin finish with Nickel barrier, and Polyethylene insulator. It is a surface mount receptacle connector suitable for board mounting in telecom and datacom applications.
10150-6000EC
3m Electronic Products Division
10150-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications due to its gold over nickel termination contact finish, glass-filled polyester insulator material, and beryllium copper contact material.
5555153-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
MUSBR-M5C1-M0
MUSBR-M5C1-M0 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a matte tin shell finish, polyethylene insulator material, and matte tin over nickel termination contact finish. Ideal for telecom & datacom applications, it has a temperature range of -40 to 105°C and UL94V-0 flammability rating.
5-554720-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Termination Type: IDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved