Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARJM11D7-104-AB-EW2 by Abracon is a Telecom & Datacom Connector with gold termination, 8 contacts, and right angle mounting. It features a polarized housing, staggered PCB contact pattern, and solder termination type. Ideal for telecom and datacom applications requiring reliable board mounting with locking option.
Median Price
$3.035
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Verical
1+ parts
$2.210
100+ parts
$2.050
1k+ parts
-
10k+ parts
Mouser Electronics
$4.160
$3.010
$2.330
$2.170
DigiKey
$4.180
$3.015
$2.563
$2.403
Chip1Stop
$2.430
PEI Genesis
Master Electronics
$2.870
$2.260
$2.070
Newark
$3.200
$2.700
$2.590
Nova Conductors
$2.240
IBS Electronics
$1.886
TME
$2.750
Vyrian
VNN
Ampacity Inc.
$1.880
Semicontronic
$1.833
$1.824
Argo Parts USA
Continental Prestige Electronics
$2.195
Netroflash
Abacus Technologies
Perfect Parts
Optimal size for space-saving installations.
Provides improved signal quality by reducing interference.
Ensures reliable and corrosion-resistant connections for long-lasting performance.
Suitable for various environmental conditions and prevents overheating.
Offers enhanced durability and conductivity for better signal transmission.
Provides sufficient connectivity options for data and telecom purposes.
Standard pitch size for compatibility with a wide range of connectors.
Facilitates easy and convenient installation in cramped spaces or specific orientations.
Telecom & Datacom Connectors ARJM11D7-104-AB-EW2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Abracon
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Empty Shell:
Filter Feature:
JESD-609 Code:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ARJM11D7-104-AB-EW2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Db Lectro
1552200253
Molex
WIRE AND CABLE;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Deltrol Controls
Other Relays;
Siemens
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
48037-2000
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
1-2007394-5
TE Connectivity
TE Connectivity 1-2007394-5 is a Telecom & Datacom Connector with 8 ports, 160 contacts, and UL 94V-0 flammability rating. It operates b/w -55°C to 105°C, suitable for board mounting applications requiring press fit termination at 0.118" terminal length.
6339160-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; MIL Conformity: NO; No. of Rows Loaded: 1;
10104110-0001LF
Amphenol Communications Solutions
Amphenol's 10104110-0001LF USB connector features a body length of 0.317", insulation resistance of 100MΩ, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this right-angle receptacle has a durable stainless steel shell, surface mount termination, and is rated for 1.8A signal current.
2076
Leoco
TELECOM AND DATACOM CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Manufacturer Series: 2076;
472720024
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
2171840001
TELECOM AND DATACOM CONNECTOR;
USB4105-GF-A-
Global Connector Technology
USB4105-GF-A- by Global Connector Technology is a USB connector with 24 contacts, rated for 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -40 to 85°C.
UX60SC-MB-5ST(80)
Hirose Electric
Hirose Electric's UX60SC-MB-5ST(80) is a USB connector with 5 contacts, rated at 1A signal current. It features synthetic resin insulation, copper alloy shell material, and operates b/w -30°C to 75°C. Ideal for telecom/datacom applications requiring high insulation resistance and reliable surface mount termination.
10126-6000EC
3m Electronic Products Division
10126-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
5-554720-3
Commscope
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; IEC Conformity: NO;
43202-4101
The Molex 43202-4101 is a telecom & datacom connector with 0.44" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecommunications equipment due to its durable brass shell, right-angle mounting style, and female contact gender.
5-2301996-1
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
87703-0001
Molex 87703-0001 is a telecom & datacom connector with 0.05" contact pitch, 2.005" body length, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in telecommunications and data communication systems due to its durable construction and high reliability standards.
5749621-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 5749621; JESD-609 Code: e3; Shell Finish: TIN/NICKEL;
43743-8101
Molex 43743-8101 is a Telecom & Datacom Connector with 0.6"x.462"x.724" dimensions, 500000000 ohm Insulation Resistance, and 1000VAC Dielectric Withstanding Voltage. Ideal for board mounting with solder holding posts, this female jack connector has 8 contacts, operates b/w -40 to 80°C, and offers durability of up to 500 cycles in commercial applications.
1334
Hirose Electric's 1334 connector is a male plug with TIN finish, ABS insulator, and designed for telecom & datacom applications. It features cable mounting and is suitable for various connectivity needs in the industry.
5749210-7
TE Connectivity's 5749210-7 is a telecom & datacom connector with EMI shielding, polyethylene insulator, and 2 loaded rows. It operates b/w -55 to 105°C, has 68 contacts, and supports round cable mounting. Ideal for applications requiring high signal current capacity in telecommunications and data communication systems.
HDRA-E68LFDT1
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
6116526-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Board Mounting Option: PEG; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ARJM11C7-502-AB-ER2-T
Abracon
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .626 inch; No. of PCB Rows: 2; Mounting Option-1: LOCKING;
ARJM11C7-009-AB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .626 inch; Total No. of Contacts: 8; Mounting Style: RIGHT ANGLE;
ARJM11D7-009-AB-EW2
Abracon's ARJM11D7-009-AB-EW2 is a telecom and datacom connector with a body length of 0.626", width of 0.543", and depth of 0.839". It features gold termination contact finish, a max operating temperature of 85°C, and a PCB contact row spacing of 2.54mm. This connector is commonly used in telecommunications and data communication applications for its polarized housing, right angle mounting style, and female contact gender.
ARJM11D7-502-AB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .839 inch; No. of Ports: 1; Mounting Option-1: LOCKING;
ARJM11D7-114-AB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: TELCOM, MODULAR; No. of Rows Loaded: 1; Filter Feature: YES;
ARJM11C7-114-BA-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: YES; Mounting Option-1: LOCKING; PCB Contact Row Spacing (mm): 2.54;
ARJM11B1-009-AB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 2.54; Termination Type: SOLDER; Polarization Key: POLARIZED HOUSING;
ARJM11C7-009-NN-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au); No. of PCB Rows: 2; Contact Style: TELCOM, MODULAR;
ARJM11C7-502-AB-EW2
ARJM11C7-502-AB-EW2 by Abracon is a Telecom & Datacom Connector with 8 contacts, gold termination finish, and polarized housing. It has a body length of 0.626", width of 0.543", and depth of 0.839". Ideal for board mounting applications in telecom and datacom systems due to its right angle mounting style and staggered PCB contact pattern.
ARJM11C7-009-AB-ER2-T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au); Total No. of Contacts: 8; Mixed Contacts: NO;
ARJM11C7-114-NN-CW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Polarization Key: POLARIZED HOUSING; Mating Contact Finish: NOT SPECIFIED;
ARJM11C7-502-AB-CW2
ARJM11C7-502-AB-CW2 by Abracon is a Telecom & Datacom Connector with gold termination finish. Featuring 8 contacts, it has a body length of 0.626", width of 0.543", and depth of 0.839". Ideal for board mounting applications in telecom and datacom systems, with operating temperatures ranging from 0 to 70°C.
ARJM11A1-502-AB-ER2-T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 2.54; Mounting Type: BOARD; Filter Feature: YES;
ARJM11C7-502-KB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Contact Style: TELCOM, MODULAR; Body Depth: .839 inch;
ARJM11C7-502-NN-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Body Width: .543 inch; Termination Contact Finish: Gold (Au);
ARJM11A1-502-AB-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: YES; Mixed Contacts: NO; Body or Shell Style: JACK;
ARJM11A1-502-NN-EW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: YES; Termination Contact Finish: GOLD;
ARJM11C7-502-KB-ER2-T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of PCB Rows: 2; Minimum Operating Temperature: -40 Cel; Mounting Type: BOARD;
ARJM11C7-502-NN-CW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
ARJM11D7-104-AN-ER2-T
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (6); No. of PCB Rows: 2; PCB Contact Pattern: STAGGERED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved