Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43202-8104 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its female contact gender, right-angle mounting style, and commercial reliability.
Median Price
$1.810
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.928
100+ parts
-
1k+ parts
$0.757
10k+ parts
$0.746
Avnet
$1.020
Verical
$1.230
$1.190
$1.140
Arrow
DigiKey
$1.860
Mouser Electronics
$2.140
$1.610
$1.380
$1.170
Distrelec
$2.231
$1.367
$1.214
Element14
$2.480
$1.820
Newark
$2.650
$2.390
$2.280
TTI
$0.950
$0.840
$0.780
PEI Genesis
Chip1Stop
$0.909
$0.866
Master Electronics
$2.160
$1.660
$1.350
Farnell
$1.547
DF Sales Co.
$0.821
Nova Conductors
$0.871
Digiode
$0.882
Maritex
$1.906
$1.312
$1.028
Bristol Electronics
$1.982
$1.229
$0.654
TME
$4.920
$2.810
$2.120
ACDS - Activité Composants Distribution Service
Dan-Mar Components
IBS Electronics
$0.638
Extreme Components
Vyrian
VNN
Jameco Electronics
Flex Direct, LLC
Electro Sonic
$0.989
$0.958
$0.752
Semi Source
BCID Electronics Ltd.
Inventory MP
Prism Electronics
PC Components Company LLC
EMSNET
Semicontronic
$0.770
$0.751
$0.747
Corphita
$0.835
Argo Parts USA
Netroflash
$0.828
$0.810
Advanced Electronics
$0.986
$0.936
Continental Prestige Electronics
$1.260
$0.880
Andel Nordic
$8.283
$7.952
Aztec Data Supply Inc.
$10.656
Kepictronics
Perfect Parts
Authorized Procurement Solutions
Glotronic Ltd.
Assy Fe
EMSNET (Excess)
Cyclops Electronics Ltd (Excess)
Akira Global LLC
Compact size allows for flexibility in fitting the connector into tight spaces.
High insulation resistance ensures reliable and stable signal transmission, reducing the risk of electrical malfunctions.
Withstands high voltages, making it suitable for telecom and datacom applications where electrical safety is crucial.
Durable and heat-resistant material provides long-lasting performance in various environmental conditions.
Operates reliably in low-temperature environments, ensuring consistent functionality in harsh conditions.
Specifically designed for telecom and datacom applications, ensuring compatibility and optimal performance.
Provides sufficient connectivity for data transfer and communication needs in networking systems.
Durable and corrosion-resistant material ensures a long lifespan for the connector in demanding environments.
Telecom & Datacom Connectors 43202-8104 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43202-8104 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Plating 17/Mar/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Silicon Standard
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
EU2B-YS3203C
Idec
ROTARY SWITCH;
Gulf Semiconductor
National Semiconductor
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
67503-1230
Molex
The Molex 67503-1230 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a durable design with GLASS FILLED NYLON insulator material and TIN termination finish. With a total of 5 contacts, this right-angle receptacle has a surface mount termination type and is rated for commercial reliability.
HFJ11-2450E-L12RL
Halo Electronics
HFJ11-2450E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 0.625" body length, 0.537" width, and 0.85" depth. It features gold termination contact finish, 30u plating thickness, and polarized housing. Ideal for board mounting applications in telecom and datacom systems.
61400416021
Wuerth Elektronik & Kg
61400416021 by Wurth Elektronik is a USB connector with 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it offers high insulation resistance of 1Gohm, operates b/w -40 to 105°C temperatures, and has a durable design rated for 1500 cycles.
48404-0003
Molex 48404-0003 USB connector with gold termination, 9 contacts, and blue insulator. Ideal for telecom/datacom applications with right-angle mounting and solder termination. Features staggered PCB contact pattern and durable stainless steel shell.
RJHSE-5384-04
Amphenol
RJHSE-5384-04 by Amphenol is a Telecom & Datacom Connector with 4 ports and 8 contacts. Featuring Matte Tin finish, it has a body length of 2.51", width of 0.53", and depth of 0.62". Ideal for board and panel mounting, this connector uses POLYETHYLENE insulator material and has a shell made of COPPER ALLOY.
90075-0141
The Molex 90075-0141 is a Telecom & Datacom Connector with 0.46" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features matte tin over nickel finish, polycarbonate insulator, and male contact gender.
1734035-1
TE Connectivity
TE Connectivity USB Connector 1734035-1 with gold termination, glass-filled polyamide insulator, and nickel shell. Ideal for telecom/datacom applications with board mounting option and 1A signal current rating. Durable design with 5000 cycles and UL flammability rating for commercial reliability.
A-2004-2-4-LPS-N-R
Assmann Wsw Components
A-2004-2-4-LPS-N-R by Assmann Wsw Components is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Featuring gold over nickel finish, it has an insulation resistance of 500M ohm and withstands up to 1000VAC. Ideal for telecom and datacom applications, this connector offers durability of 500 cycles and operates b/w -40°C to +85°C.
JXD1-0025NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
614004135023
614004135023 USB connector by Wurth Elektronik features gold termination, polybutylene terephthalate insulator, and copper alloy contacts. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring a durable, polarized housing with solderable retention clips. Operating b/w -40 to 105°C, this female receptacle offers reliable signal current of 1.5A and UL-rated flammability.
1-1734100-0
TE Connectivity 1-1734100-0 is a Telecom & Datacom Connector with 100 contacts, 4 rows, and 0.05" mating contact pitch. It features liquid crystal polymer insulation, tin termination finish, and operates b/w -55°C to 105°C. Ideal for telecom and datacom applications requiring high durability and reliability.
10113616-01531LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10113616-01531LF is a telecom & datacom connector with 8 ports and 64 contacts. It features a nickel shell finish, polyethylene insulator material, and copper alloy shell material. Ideal for board mounting applications, this connector has a UL flammability code of 94V-0 and solder termination for female contacts in right angle mounting style.
RJE1R288236402
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: TIN;
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
HDR-E26MSG1+
Honda Tsushin Kogyo
HDR-E26MSG1+ by Honda Tsushin Kogyo is a telecom & datacom connector with 26 gold contacts, nickel shell finish, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a UL Flammability Code of 94V-0 and is designed for cable mounting applications. The connector features male contact gender and solder termination for reliable connectivity in various communication systems.
UX60SC-MB-5S8(80)
Hirose Electric
The Hirose Electric UX60SC-MB-5S8(80) is a USB connector with 5 contacts, rated at 1A signal current. Featuring a dielectric voltage of 100VAC and insulation resistance of 100MΩ, it's ideal for telecom/datacom applications. With a durable design lasting up to 5000 cycles, this right-angle mount connector has a shell finish of TIN and insulator material made from synthetic resin.
87520-1010BLF
87520-1010BLF by Amphenol is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1Gohm, suitable for telecom/datacom applications. With a durable design lasting up to 1500 cycles, it offers reliable performance in commercial settings.
1304
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO; Insulator Material: ACRYLONITRILE BUTADIENE STYRENE;
ZX62D-AB-5P8
ZX62D-AB-5P8 by Hirose Electric is a Micro USB2.0 AB connector with 5 contacts, rated at 1A signal current. It features a Liquid Crystal Polymer insulator, operates b/w -30 to 85°C, and has a dielectric voltage of 100VAC. Ideal for telecom/datacom applications, this right-angle receptacle has a surface mount termination on a board with locking mounting option for secure connections.
RJHSE-3081
RJHSE-3081 by Amphenol is a Telecom & Datacom Connector with POLYETHYLENE insulator. Featuring 8 contacts, it has a 94V-0 UL Flammability Code and FEMALE contact gender. Ideal for BOARD mounting, this TELECOM AND DATACOM CONNECTOR is commonly used in applications requiring STRAIGHT mounting style and TELCOM, MODULAR contact style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43202-6101
Molex 43202-6101 is a telecom & datacom connector with 0.52" body length, 5000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting with split board lock option, it operates b/w -40 to 85 °C and has UL94V-0 flammability rating.
43202-4101
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Total No. of Contacts: 4;
43202-8919
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Ports: 1;
43202-8816
Molex 43202-8816 is a telecom & datacom connector with body dimensions of 0.624" x 0.465" x 0.734". It offers 8 contacts, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in commercial applications requiring durable connectors.
43202-8101
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 500 Cycles;
43202-8927
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; UL Flammability Code: 94V-0;
43202-8116
43202-8107
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
43202-8110
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Style: TELCOM, MODULAR; Total No. of Contacts: 8;
43202-8113
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Option-2: LOCKING;
43202-8908
43202-8917
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Length: .624 inch;
43202-8119
43202-8125
43202-8105
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED;
43202-8122
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulator Color: BLACK;
43202-8504
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Terminal Length: .12 inch;
43202-8801
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Type: BOARD AND PANEL;
43202-8802
43202-8811
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved