Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1210120107 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
Median Price
$2.210
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$1.700
100+ parts
$1.520
1k+ parts
$1.450
10k+ parts
-
Mouser Electronics
$3.350
$2.740
$2.220
$2.180
DigiKey
$2.750
$2.490
Element14
$3.550
$2.260
$2.020
Chip1Stop
$2.110
Verical
$1.540
$1.498
Powell Electronics
$1.650
Nova Conductors
$1.360
Rapid Electronics
$1.652
Digiode
$2.328
TME
$2.370
$1.920
$1.720
Vyrian
NAC Semi
$1.880
IBS Electronics
$1.860
$1.740
VNN
Andel Nordic
$0.090
$0.061
Semicontronic
$1.310
$1.277
$1.271
Continental Prestige Electronics
$1.332
Argo Parts USA
Corphita
$2.205
Aztec Data Supply Inc.
$9.691
GreenTree Electronics
Netroflash
$1.292
$1.264
Assy Fe
Eastek
Snap coupling makes it easy to connect and disconnect the power connector quickly, saving time and effort.
With a maximum operating temperature of 70 °C, this power connector can withstand high temperatures without malfunctioning, ensuring reliability under varying conditions.
The power connector can also operate at extremely low temperatures as low as -40 °C, making it suitable for a wide range of environments.
Designed specifically for mains power applications, this connector is safe and reliable for connecting to power sources.
With 4 contacts, this power connector allows for multiple connections, enhancing its versatility and usability in various applications.
Panel mounting makes it easy to install the power connector securely on a panel, ensuring a stable and secure connection.
With a high connector rating of 10A, 250VAC/300VDC, this power connector can handle high power loads, making it suitable for demanding applications.
Solder termination provides a strong and reliable connection, ensuring that the power connector stays securely attached without the risk of coming loose.
The male contact gender is commonly used in power connectors and ensures compatibility with various female connectors, making it easy to connect to other devices.
Mains Power Connectors 1210120107 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
1210120107 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Additional Location 18/Nov/2021
PCN Packaging - Mult Devs Packaging Process 31/Jul/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Jinan Jingheng Electronics
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
1271830
Phoenix Contact
MAINS POWER CONNECTOR;
DD11.0114.1111
Schurter Ag
Schurter Ag's DD11.0114.1111 is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10A, 250VAC rating. Ideal for panel mounting applications in various industries due to its CSA/CUL standards compliance and temperature range of -25 to 85°C.
25W34BLK
Molex
25W34BLK by Molex is a mains power connector with dimensions of 1.2" x 0.906" x 2.24". It has a max operating temperature of 70°C and can handle up to 10A at 250VAC. This female receptacle connector is ideal for panel mounting applications in various industries.
6173.002
Schurter Ag's 6173.002 mains power connector features SNAP coupling, PA shell material, and 20A, 250VAC rating. Ideal for panel mounting applications with male contact gender and solder termination type. Operating temperatures range from -25 to 155°C making it suitable for various industrial uses.
1301460096
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DD11.0124.1111
Schurter Ag's DD11.0124.1111 is a 10A, 250VAC mains power connector with SNAP coupling type and POLYETHYLENE insulator. It has 3 contacts, suitable for panel mounting applications in various industries. Operating temperature ranges from -25 to 85°C, conforming to IEC standards.
PS00XDS6B
TE Connectivity
TE Connectivity's PS00XDS6B is a mains power connector with 115/230VAC rating. It operates b/w -10 to 40°C, featuring a straight mounting style and an empty shell design. Ideal for applications requiring reliable power connections in various electronic devices.
DC21.0021.1111
Schurter Ag's DC21.0021.1111 is a 15A, 250VAC mains power connector with SNAP coupling, POLYETHYLENE insulator, and -25 to 70°C operating range. Ideal for panel mounting applications requiring CCC and CSA standards compliance.
1301410064
1212110293
17252A0B1
Volex Plc
17252A0B1 by Volex Plc is a mains power connector with dimensions of 1.969" x 0.886" x 0.866". It has a nickel termination contact finish, polyethylene insulator material, and a total of 3 contacts. This male connector is rated for 10/15A at 250VAC and uses solder termination, suitable for panel mounting applications.
IL13-CH1-H05-3100-200
Schaffner Holding Ag
IL13-CH1-H05-3100-200 by Schaffner Holding Ag is a SNAP mains power connector with dimensions 1.811" x 1.378" x 1.831". It operates b/w -25°C to 85°C, has 3 contacts, and supports up to 10A at 250VAC. Ideal for panel mounting applications requiring male solder termination according to CSA and CQC standards.
1300060737
HBL2421
Hubbell
Hubbell's HBL2421 is a 20A, 250VAC mains power connector with SNAP coupling. Featuring POLYAMIDE insulator and BRASS contacts, it has 3 male contacts for cable mounting. Ideal for industrial applications requiring reliable power connections.
P53BLK
Mk Electric
The Mk Electric P53BLK is a SNAP mains power connector with 3 contacts, rated at 5A. It features a rubber shell and male contact gender, suitable for cable mounting applications. Ideal for use in various electrical equipment requiring secure power connections.
1210230341
Molex 1210230341 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination. Ideal for panel mounting applications requiring reliable male contact in power connections.
PS0S0DH3B
Elma Electronic
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Additional Features: SHIELDED; Mating Contact Finish: NOT SPECIFIED;
5707.0403.413.01
Schurter Ag's 5707.0403.413.01 is a SNAP mains power connector with POLYAMIDE6 insulator, suitable for panel mounting. It has 3 contacts, rated at 10A, 250VAC, and operates b/w -25 to 70°C. Ideal for applications requiring reliable female solder termination in electrical systems compliant with CSA and UL standards.
6432.025330
6432.025330 by Schurter Ag is a mains power connector with 6 contacts, rated at 10A and 250V. Featuring snap coupling and DIN/IEC conformity, it has quick connect termination for panel mounting. Ideal for applications requiring reliable power connections in various electronic devices.
HBL4729C
Hubbell's HBL4729C is a 15A, 125V mains power connector with SNAP coupling. Featuring POLYAMIDE insulator and BRASS contacts, it has 3 FEMALE contacts for cable mounting applications. Ideal for various electrical equipment requiring reliable power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1210120007
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
1210120013
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Maximum Operating Temperature (Cel): 70;
1210120076
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mains Connector Rating: 10A, 250VAC/300VDC; Maximum Operating Temperature (Cel): 70;
1210120071
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210902
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1210120168
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
1210230684
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Mounting Type: PANEL; Mains Connector Rating: 10A, 250VAC/300VDC;
1210010220
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mounting Type: PANEL;
1210401310
1210900
1210230336
1210230438
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
1210120102
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230122
Molex 1210230122 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210230238
Molex 1210230238 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210120114
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 4;
1210120118
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; Minimum Operating Temperature: -40 Cel; Termination Type: SOLDER;
1210120040
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Total No. of Contacts: 4;
1210120030
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved