Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1210230238 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
Median Price
$2.930
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Farnell
1+ parts
$1.780
100+ parts
$1.170
1k+ parts
$1.100
10k+ parts
-
Verical
$2.390
$2.210
Arrow
$2.763
$2.654
$1.458
Mouser Electronics
$5.020
$3.620
$3.080
$2.880
DigiKey
$3.625
$3.082
$2.889
RS Americas
$5.080
$3.760
$3.450
Newark
$6.020
$4.030
$3.540
Element14
$7.220
$5.060
$4.190
$3.880
PEI Genesis
Chip1Stop
$3.060
$2.840
Master Electronics
$2.960
$2.760
TTI Europe
$1.696
$1.210
Powell Electronics
$2.550
$2.360
TTI
$2.900
$2.420
RS (Exports)
$1.478
Distrelec
Digiode
$1.691
Rapid Electronics
$2.248
Nova Conductors
$2.570
TME
$2.690
$1.600
Vyrian
IBS Electronics
$2.833
$2.637
NAC Semi
$2.250
$2.070
VNN
Rutronik
$1.330
$1.160
Corphita
$1.602
Continental Prestige Electronics
$2.110
$1.310
$1.010
Netroflash
$2.519
$2.441
Andel Nordic
$47.690
$33.380
Perfect Parts
Kepictronics
Argo Parts USA
GreenTree Electronics
Assy Fe
Allen Electronics Distributors
$1.166
Eastek
The snap coupling type allows for quick and easy connections, making this product convenient to use.
With a high maximum operating temperature, this connector can withstand heat without malfunctioning.
The low minimum operating temperature ensures that this connector can be used in a variety of environments.
Designed specifically for mains power connections, this connector is reliable and safe to use.
With four contacts, this connector can handle multiple connections at once, making it efficient for use.
The panel mounting type allows for secure installation onto panels, making this connector stable and durable.
With a high connector rating, this product is suitable for a range of power applications.
The solder termination type ensures a strong and reliable connection, making this product durable and long-lasting.
The male contact gender is standard for mains power connectors, ensuring compatibility with other devices.
Mains Power Connectors 1210230238 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Mains Connector Rating:
Mating Info.:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
1210230238 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Tool Duplication 31/Jan/2023
PCN Packaging - Multiple Devices Package Label 17/Oct/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
1162163
Phoenix Contact
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1627500
MAINS POWER CONNECTOR;
5123.1007.0.21
Schurter Ag
5123.1007.0.21 by Schurter Ag is a SNAP mains power connector with POLYAMIDE6 insulator material, suitable for panel mounting applications. It has 3 contacts, rated at 10A and 250VAC, with solder termination type. Operating temperature range from -25 to 70 °C makes it versatile for various environments.
1301470297
Molex
6600.33
The Schurter Ag 6600.33 is a mains power connector with dimensions of 1.362" x 0.906" x 0.839". It has a SNAP coupling type, operates b/w -25°C to 70°C, and supports 10/15A, 250VAC rating. Ideal for panel mounting applications requiring quick connect termination in compliance with CSA and UL standards.
DD11.0113.1110
Schurter Ag's DD11.0113.1110 is a 10A, 250VAC mains power connector with SNAP coupling type and POLYETHYLENE insulator material. It has a body size of 2.55" x 1.2" x 1.5", suitable for panel mounting applications in various industries due to its CSA and CUL conformity and operating temperature range of -25°C to 85°C.
354
Mennekes Elektrotechnik & Kg
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Body Depth: 6.693 inch; Body Width: 3.307 inch;
HBL5462I
Hubbell
HBL5462I by Hubbell is a mains power connector with dimensions of 3.28" x 1.65" x 1.19". It has a max operating temperature of 75°C and min of -40°C, suitable for various applications including industrial machinery and electrical equipment due to its 20A, 250V rating. The connector features a snap coupling type, polybutylene terephthalate insulator material, and screw termination type for secure connections.
2867
Eaton Corporation
MAINS POWER CONNECTOR; Manufacturer Series: 2867;
1301460091
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
PE0S0DHXA
Cii Technology
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10, 250 VAC; Total No. of Contacts: 3; MIL Conformity: NO;
1300170011
MAINS POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
6100.3300.33
6100.3300.33 by Schurter Ag is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 15A, 250VAC rating. Ideal for panel mounting applications in environments ranging from -25 to 70°C. Compliant with CCC and CSA standards for reliable performance.
1210230238
6610.1354.03
Schurter Ag's 6610.1354.03 is a SNAP mains power connector with dimensions of 1.362" x 0.906" x 0.839". It has a rating of 10/15A, 250VAC and operates b/w -25 to 70°C. Ideal for panel mounting applications, it features quick connect termination and male contact gender in compliance with CSA and UL standards.
FN281-2-06
Schaffner Holding Ag
FN281-2-06 by Schaffner Holding Ag is a SNAP-type mains power connector with 3 contacts, rated at 2A and 250VAC. It is IEC compliant, features solder termination, and is designed for panel mounting applications.
6051.2043
Schurter Ag's 6051.2043 is a SNAP mains power connector with 3 contacts, rated at 16A, 250VAC. It features PVC shell material and conforms to IEC standards. Ideal for cable mounting applications requiring a female plug connector in the mains power category.
PS0SSSS6A
TE Connectivity
PS0SSSS6A by TE Connectivity is a mains power connector with 115/230VAC rating. It operates b/w -10°C to 40°C, featuring a straight mounting style and an empty shell design. Ideal for applications requiring reliable power connections in various electronic devices.
DD22.1321.1111
Schurter Ag's DD22.1321.1111 is a SNAP mains power connector with POLYETHYLENE insulator, IEC conformity, and 3 contacts rated at 1A, 250VAC. Ideal for panel mounting applications requiring quick connect termination for male contact gender.
3EGG8C-1
The TE Connectivity 3EGG8C-1 is a SNAP mains power connector with 3 contacts, suitable for 115/230VAC. It has a temperature range of -10 to 40°C and features wire wrap termination. Ideal for panel mounting applications requiring a male contact gender in straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1210120007
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
1210120107
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210120013
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Maximum Operating Temperature (Cel): 70;
1210120076
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mains Connector Rating: 10A, 250VAC/300VDC; Maximum Operating Temperature (Cel): 70;
1210120071
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210902
1210120168
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
1210230684
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Mounting Type: PANEL; Mains Connector Rating: 10A, 250VAC/300VDC;
1210010220
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1210230341
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mounting Type: PANEL;
1210401310
1210900
1210230336
1210230438
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
1210120102
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230122
Molex 1210230122 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210230470
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Termination Type: SOLDER; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230377
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; Termination Type: SOLDER; Total No. of Contacts: 4;
1210230626
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; Coupling Type: SNAP; Mounting Type: PANEL;
1210230819
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; Termination Type: SOLDER; Mains Connector Rating: 10A, 250VAC/300VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved