Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1210230122 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
Median Price
$3.318
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Master Electronics
1+ parts
$4.279
100+ parts
$3.890
1k+ parts
$3.440
10k+ parts
-
DigiKey
$5.340
$3.854
$3.277
$3.072
Mouser Electronics
$5.830
$3.350
$2.880
$2.820
TTI Europe
$2.461
$2.331
Verical
$3.777
$3.657
Chip1Stop
$2.860
$2.650
Distrelec
Arrow
$2.550
$2.500
$2.334
PEI Genesis
Powell Electronics
$2.610
$2.430
TME
$1.970
$1.570
Nova Conductors
$2.480
Digiode
$4.626
Vyrian
Rutronik
$1.480
$1.400
IBS Electronics
$2.725
$2.675
VNN
Netroflash
Corphita
$4.383
AZTECH Wire
$7.000
$6.720
$6.590
$6.460
Andel Nordic
$113.750
$79.625
Perfect Parts
Assy Fe
Continental Prestige Electronics
Argo Parts USA
The snap coupling type makes it easy and quick to connect and disconnect the power connector, increasing efficiency.
With a wide operating temperature range, this power connector is suitable for use in a variety of environments.
This connector is specifically designed for mains power applications, ensuring reliable and secure power connections.
With four contacts, this connector can handle multiple connections, making it versatile for various power applications.
The panel mounting type allows for easy installation on panels, saving time and effort during setup.
The high current and voltage ratings make this connector suitable for use in demanding power applications.
The solder termination type ensures a secure and durable connection, reducing the risk of disconnects or failures.
The male contact gender makes this connector compatible with female connectors, ensuring a reliable connection.
Mains Power Connectors 1210230122 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Mains Connector Rating:
Mating Info.:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
1210230122 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Tool Duplication 31/Jan/2023
PCN Packaging - Mult Devs Packaging Process 31/Jul/2023 Multiple Devices Package Label 17/Oct/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
BAV99
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
HBL2811SW
Hubbell
HBL2811SW by Hubbell is a 30A, 120/208V mains power connector with BAYONET coupling type. Featuring POLYBUTYLENE TEREPHTHALATE insulator material, it has a body length of 2.94" and depth of 4.4". Ideal for cable mounting applications, this male plug connector operates b/w -40 to 75°C temperature range.
5252AB
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 70; Additional Features: STANDARD : CSA C22.2, IEC 60320, UL 498; Body Depth: 2.24 inch;
DD11.0113.1111
Schurter Ag
Schurter Ag's DD11.0113.1111 is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10A, 250VAC rating. Ideal for panel mounting applications in environments ranging from -25 to 85°C. Compliant with IEC standards and suitable for various industrial uses.
1301460091
Molex
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5EFM1
Corcom
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Panel Mount: NO; Filter Feature: NO;
PF0030/PC
Bulgin
The Bulgin PF0030/PC is a mains power connector with dimensions of 1.732" x 1.574" x 0.846". It has a max operating temperature of 70°C and min of -40°C, suitable for panel mounting applications. Featuring a coupling type of SNAP, it offers 10A, 250VAC mains connector rating with tin termination finish for male contacts.
6162.0021
Schurter Ag's 6162.0021 is a SNAP mains power connector with 3 contacts, rated at 10/15A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
HBL2320SW
Hubbell's HBL2320SW is a 20A, 250V mains power connector with bayonet coupling. Featuring female contact gender and wire wrap termination, it has a compact body size of 3.75" x 3.75". Ideal for cable mounting applications requiring reliable power connections.
1106307
Phoenix Contact
MAINS POWER CONNECTOR;
FN282-10-06
Schaffner Holding Ag
Schaffner Holding Ag's FN282-10-06 is a SNAP mains power connector with 3 contacts, rated at 10A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
5266-C
Leviton Mfg
Leviton Mfg 5266-C is a SNAP mains power connector with POLYAMIDE insulator and BRASS contacts. Rated at 15A, 125V, it has 2 contacts for CABLE mounting. Ideal for male connectors in PLUG applications requiring SCREW termination.
PE000SH3A
Cii Technology
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Total No. of Contacts: 3; Additional Features: STANDARDS: CSA; UL; VDE;
HBL2321S
HBL2621
Hubbell's HBL2621 is a 30A, 250V mains power connector with SNAP coupling. It features 2 male contacts for cable mounting applications. Ideal for industrial and commercial use in powering equipment or machinery.
DD21.0111.1111
The Schurter Ag DD21.0111.1111 is a SNAP mains power connector with dimensions of 2.56" x 1.27" x 1.5". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a 10A, 125VAC mains connector with male solder termination in panel mounting setups.
HBL2323BK
2-1609114-7
TE Connectivity
TE Connectivity's 2-1609114-7 is a mains power connector conforming to IEC 60320 standards, with an empty shell and male contact gender. Rated for 115/230VAC, it features a receptacle body style. Ideal for applications requiring reliable power connections in various electronic devices.
4797.0000
The Schurter Ag 4797.0000 is a SNAP mains power connector with POLYETHYLENE insulator material. It has 3 contacts, rated at 16/20A and 250VAC for panel mounting applications. This FEMALE quick connect plug is IEC compliant, ideal for various electrical equipment requiring reliable power connections.
1210120168
Molex 1210120168 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It has a solder termination type and male contact gender. Ideal for applications requiring panel mounting in temperatures ranging from -40 to 70°C.
1210120102
Molex 1210120102 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It has a solder termination type and male contact gender. Ideal for applications requiring panel mounting in temperatures ranging from -40°C to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1210120007
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
1210120107
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210120013
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Maximum Operating Temperature (Cel): 70;
1210120076
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mains Connector Rating: 10A, 250VAC/300VDC; Maximum Operating Temperature (Cel): 70;
1210120071
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210902
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
1210230684
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Mounting Type: PANEL; Mains Connector Rating: 10A, 250VAC/300VDC;
1210010220
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1210230341
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mounting Type: PANEL;
1210401310
1210900
1210230336
1210230438
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230238
Molex 1210230238 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210230454
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER;
1210230474
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mounting Type: PANEL;
1210230414
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC;
1210230616
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Coupling Type: SNAP; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved