Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Median Price
$13.445
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$11.470
100+ parts
$7.420
1k+ parts
-
10k+ parts
Mouser Electronics
$15.420
$12.800
Digiode
$10.896
Nova Conductors
$12.535
VNN
Vyrian
Aztec Data Supply Inc.
$3.270
Andel Nordic
$7.060
$4.940
Corphita
$10.323
Continental Prestige Electronics
$12.284
Netroflash
AZTECH Wire
$18.778
Argo Parts USA
Assy Fe
Mains Power Connectors 1210010220 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1210010220 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
EU2B-YS303C
Idec
ROTARY SWITCH;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
932448-100
Hirschmann Electronics & Kg
MAINS POWER CONNECTOR; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: CABLE; Termination Type: SOLDER; DIN Conformance: NO;
HBL5266C
Hubbell
Hubbell's HBL5266C is a 15A, 125V mains power connector with SNAP coupling. Made of POLYAMIDE, it has 2 contacts and SCREW termination for CABLE mounting. Ideal for applications requiring reliable male plug connections in various electrical setups.
S18211TC3H1
Molex
MAINS POWER CONNECTOR;
5EFM1S
TE Connectivity
TE Connectivity's 5EFM1S is a SNAP mains power connector with 3 contacts, rated for 115/230VAC. Operating temperatures range from -10 to 40°C. Ideal for panel mounting applications, featuring a straight male contact gender and an empty shell design.
6VM1S
Corcom
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; MIL Conformity: NO; Manufacturer Series: M;
9-6609955-2
TE Connectivity 9-6609955-2 is a mains power connector with 115/230VAC rating. It operates b/w -10 to 40°C, featuring a panel mounting style and an empty shell design. Ideal for applications requiring reliable power connections in various electronic devices.
PX0587
Bulgin
The Bulgin PX0587 is a mains power connector with snap coupling, polyamide insulator, and 10A, 250VAC rating. It has 3 contacts for cable mounting with screw termination. Ideal for applications requiring reliable female connectors in temperatures ranging from -40 to 70°C.
1707091
Phoenix Contact
PX0686
The Bulgin PX0686 is a mains power connector with snap coupling, suitable for cable mounting. Featuring polyamide insulator material, it has a 10A, 250VAC mains connector rating. With dimensions of 1.142" x 0.89" x 2.016", it operates b/w -40°C to 70°C, making it ideal for various industrial applications.
6173.0003
Schurter Ag
Schurter Ag's 6173.0003 mains power connector features snap coupling, polyamide insulator, and 20A, 250VAC rating. Ideal for panel mounting applications with male contact gender and solder termination type. Operating temperature range from -25 to 155 °C makes it suitable for various industrial uses.
15CBE1
15CBE1 by TE Connectivity is a mains power connector with IEC conformity and an empty shell. It has a mains connector rating of 115/230VAC, male contact gender, and receptacle body style. Ideal for applications requiring reliable power connections in compliance with IEC 60320 standards.
DD22.1321.1111
Schurter Ag's DD22.1321.1111 is a SNAP mains power connector with POLYETHYLENE insulator, IEC conformity, and 3 contacts rated at 1A, 250VAC. Ideal for panel mounting applications requiring quick connect termination for male contact gender.
PX0580/63
The Bulgin PX0580/63 is a mains power connector with snap coupling, polyamide insulator, and brass contact material. It has 3 contacts, solder termination, and operates b/w -40 to 70°C. Ideal for applications requiring a male mains power connector rated at 10/15A, 250VAC.
1210230238
Molex 1210230238 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
HBL2510SW
83011380
Panel Components
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: YES; Reference Standard: CSA, UL; Body Width: .95 inch;
2781MB
4302.2004
The Schurter Ag 4302.2004 is a SNAP mains power connector with POLYETHYLENE insulator material. It has 3 contacts, rated at 10/15A, 250VAC for panel mounting applications. This male socket connector features quick connect termination and conforms to IEC standards.
HBL5466CA
Hubbell's HBL5466CA is a 20A, 250V mains power connector with SNAP coupling. Made of POLYAMIDE, it has 2 male contacts for cable mounting. Ideal for industrial and commercial applications requiring reliable power connections.
DC11.0001.003
Schurter Ag's DC11.0001.003 is a mains power connector with dimensions 1.73" x 1.33" x 1.43". It has a max operating temperature of 70°C and conforms to IEC standards, suitable for panel mounting applications at 15A, 250VAC rating with quick connect termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1210120007
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
1210120107
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210120013
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Maximum Operating Temperature (Cel): 70;
1210120076
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mains Connector Rating: 10A, 250VAC/300VDC; Maximum Operating Temperature (Cel): 70;
1210120071
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210902
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1210120168
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
1210230684
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Mounting Type: PANEL; Mains Connector Rating: 10A, 250VAC/300VDC;
1210230341
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mounting Type: PANEL;
1210401310
1210900
1210230336
1210230438
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
1210120102
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230122
Molex 1210230122 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210010210
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1210010024
MAINS POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1210010172
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1210010174
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved