Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1210230684 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
Median Price
$2.522
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
$2.140
1k+ parts
10k+ parts
Verical
Farnell
$3.290
$3.100
Nova Conductors
$2.162
Vyrian
VNN
Digiode
TME
$2.610
$2.350
IBS Electronics
$2.792
Aranea Global
$2.119
$2.034
Continental Prestige Electronics
Argo Parts USA
Aztec Data Supply Inc.
$4.951
Semicontronic
$13.500
$13.162
$13.095
AZTECH Wire
$15.980
Corphita
Assy Fe
Snap coupling type allows for quick and easy connection, saving time and effort during installation.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising performance.
The low minimum operating temperature ensures that this product can still function effectively in extremely cold environments.
Designed specifically for mains power connection, ensuring safe and reliable electrical connections.
Having 4 contacts provides multiple connection points for increased reliability and stability.
Panel mounting type allows for secure installation onto various surfaces, providing stable and reliable connections.
With a high current and voltage rating, this connector can handle a wide range of power requirements, suitable for various applications.
Solder termination provides a strong and durable connection, ensuring long-lasting performance and reliability.
Male contact gender is commonly used in power connectors, offering a secure and reliable connection with corresponding female connectors.
Mains Power Connectors 1210230684 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Mains Connector Rating:
Mating Info.:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
1210230684 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148-GS08
Vishay Telefunken
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1301470037
Molex
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
KMF1.1221.11
Schurter Ag
KMF1.1221.11 by Schurter Ag is a mains power connector with SNAP coupling type and TIN/TIN COPPER termination contact finish. It has 3 contacts, rated at 2A, 125/250VAC for panel mounting applications. This male socket connector is IEC conformant and ideal for quick connect terminations in various electronic devices.
2CSM211000R0721
Abb
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5123.1006.0
5123.1006.0 by Schurter Ag is a mains power connector with dimensions of 1.362" x 0.906" x 0.839". It has a SNAP coupling type, operates b/w -25°C to 70°C, and supports 10/15A at 250VAC. Ideal for panel mounting applications requiring quick connect termination with male contact gender according to CSA and UL standards.
BS5131-0
Hans Turck & Kg
BS5131-0 by Hans Turck & KG is a threaded mains power connector with 3 contacts, rated at 4A, 60VAC/75VDC. It features polybutylene terephthalate insulator and shell material, suitable for cable mounting with solder termination. Ideal for applications requiring reliable male contact in power connections.
259
Mennekes Elektrotechnik & Kg
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 3;
703W-00/08
Qualtek Electronics
703W-00/08 by Qualtek Electronics is a mains power connector with dimensions of 1.95" x 0.76" x 0.76". It has a total of 3 contacts, rated at 15A and 250VAC for panel mounting applications. The connector features snap coupling, solder termination, and complies with CSA and UL standards.
4303.0001
The Schurter Ag 4303.0001 is a mains power connector with TIN/TIN COPPER termination finish and SNAP coupling type. It features POLYETHYLENE insulator material, IEC conformity, and QUICK CONNECT termination type. Ideal for applications requiring a 10/13A, 250VAC mains connector with 3 contacts in a PANEL mount configuration.
1-1609112-8
TE Connectivity's 1-1609112-8 is a mains power connector with IEC conformity and empty shell. Featuring male contact gender, it has a mains connector rating of 115/230VAC. This receptacle type connector follows the reference standard IEC 60320 for various applications.
1210120107
Molex 1210120107 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
PS0S0DBX0
Cii Technology
PS0S0DBX0 by Cii Technology is a SNAP coupling type mains power connector with 1 port and 3 contacts. It has a max operating temperature of 40°C and min operating temperature of -10°C. This connector is suitable for panel mounting and has a mains connector rating of 115/230VAC, making it ideal for quick connect applications.
4771.0110
MAINS POWER CONNECTOR;
HBL2321VY
Hubbell
DD11.0114.1110
Schurter Ag's DD11.0114.1110 is a 10A, 250VAC mains power connector with SNAP coupling type and POLYETHYLENE insulator material. It has a body size of 2.55" x 1.2" x 1.5", suitable for panel mounting applications in various industries due to its CSA and CUL reference standards compliance and operating temperature range from -25°C to 85°C.
4000-68000-3240000
Murrelektronik
FN282-4-06
Schaffner Holding Ag
FN282-4-06 by Schaffner Holding Ag is a SNAP mains power connector with 3 contacts, rated at 4A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications. This male connector is ideal for various electronic devices requiring reliable power connections.
DD21.0114.1111
Schurter Ag's DD21.0114.1111 is a SNAP mains power connector with 3 contacts, rated at 10A, 125VAC. It has a panel mounting type and uses solder termination. With IEC conformity and CSA/CUL standards, it is ideal for applications requiring reliable power connections in temperatures ranging from -25 to 85°C.
PS0S0DS60
Corcom
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Termination Type: QUICK CONNECT; Total No. of Contacts: 3;
4303.0004
The Schurter Ag 4303.0004 is a mains power connector with TIN/TIN COPPER termination finish, SNAP coupling type, and POLYETHYLENE insulator material. It has 3 contacts, rated at 10/13A and 250VAC for panel mounting applications requiring quick connect terminations. IEC conformity ensures reliable performance in various electrical systems.
PS00XDSX0
PS00XDSX0 by TE Connectivity is a mains power connector with a max operating temperature of 40°C and min of -10°C. Featuring a straight mounting style, it has a mains connector rating of 115/230VAC. This connector is ideal for applications requiring reliable power connections in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1210120007
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 10A, 250VAC/300VDC; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210120013
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; Maximum Operating Temperature (Cel): 70;
1210120076
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mains Connector Rating: 10A, 250VAC/300VDC; Maximum Operating Temperature (Cel): 70;
1210120071
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel;
1210902
Phoenix Contact
1210120168
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
1210010220
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1210230341
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mounting Type: PANEL;
1210401310
1210900
1210230336
1210230438
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
1210120102
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Mains Connector Rating: 10A, 250VAC/300VDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1210230122
Molex 1210230122 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210230238
Molex 1210230238 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40°C to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
1210230233
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Termination Type: SOLDER; Maximum Operating Temperature (Cel): 70;
1210230242
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature (Cel): 70; Coupling Type: SNAP;
1210230245
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Minimum Operating Temperature: -40 Cel; Mains Connector Rating: 10A, 250VAC/300VDC;
1210230470
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 70; Termination Type: SOLDER; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved