Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-70-1031 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.051-0.126 inch cable entry with wire sizes ranging from 24-18 AWG. Suitable for straight mounting in assembly products.
Median Price
$0.048
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Misumi USA
1+ parts
$0.023
100+ parts
1k+ parts
-
10k+ parts
Distrelec
$0.043
Adafruit Industries
$0.049
$0.047
Element14
$0.083
$0.081
$0.079
Newark
$0.103
$0.065
$0.057
$0.052
Arrow
$0.106
$0.039
DigiKey
$0.110
$0.055
$0.046
Heilind Electronics
$0.031
Chip1Stop
NEP Electronics
TTI
RS (Exports)
$0.070
$0.066
Mouser Electronics
Interstate Connecting
$0.030
TTI Europe
$0.032
Verical
Avnet
$0.038
Farnell
$0.069
$0.058
Master Electronics
Beyond Components
Powell Electronics
PSC Electronics
Digiode
$0.022
Nova Conductors
$0.061
DF Sales Co.
$0.093
Jameco Electronics
Chip Stock
Vyrian
IBS Electronics
TME
$0.050
Rutronik
Greenchips
Resion
Q Components
VNN
ABC Electronics Ltd.
Connector Distribution Corp
Right Parts Inc.
EMSNET
Semicontronic
$0.020
$0.019
Corphita
$0.021
J3
Modulus Dynamics
Advanced Electronics
Argo Parts USA
$0.059
Netroflash
$0.060
Continental Prestige Electronics
$0.051
Aztec Data Supply Inc.
$4.261
Perfect Parts
EMSNET (Excess)
Eastek
GreenTree Electronics
Authorized Procurement Solutions
Kepictronics
Allen Electronics Distributors
$0.027
Glotronic Ltd.
Assy Fe
CPlus Electronics
Formix International (Excess)
Metaverse IC Inc.
Robosynatics
Lucentia Tech
Speed Components Ltd (Excess)
The finish thickness of 35 ensures durability and reliability in the product.
Crimp terminals provide a secure and stable connection, ensuring good conductivity.
Allows for compatibility with a wide range of cable sizes, making it versatile.
The contact assembly item name indicates its specific use and function in assemblies.
Supports smaller wire sizes, allowing for flexibility in wiring configurations.
Can accommodate larger wire sizes, providing compatibility with various wiring needs.
Specifically designed for female connectors, ensuring proper fit and function in the assembly.
Straight mounting style makes installation easier and ensures a secure connection.
Brass material offers excellent conductivity and durability for long-lasting performance.
The terminal length provides a secure connection and ensures proper contact with other components.
Assembly Products 08-70-1031 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-70-1031 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Semitronics
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Silicon Transistor
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
W2S-P012
TE Connectivity
TE Connectivity's W2S-P012 is a wedge item in the DT Series, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it ensures reliable performance in various assembly projects.
MTCB1X-105-XXX
TE Connectivity's MTCB1X-105-XXX is an Assembly Product with a max operating temperature of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, and features male contact gender. Ideal for applications involving round wire due to its Polyarylene/Polyethylene material composition.
0800886
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;
W3P-1939
TE Connectivity's W3P-1939 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125°C, it supports up to 0 AWG wire size. Made of POLYBUTYLENE TEREPHTHALATE, it's ideal for various applications requiring robust electrical connections.
929939-3
TE Connectivity 929939-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 130°C, suitable for wire sizes ranging from 20 to 17 AWG. With a rated current of 30A, it's commonly used in assembly products for female contacts.
249-117
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;
2002-404
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
281934-3
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Operating Temperature: 130 Cel; Material: LSR; Assembly Item Name: SEALING ITEM; MIL Conformity: NO;
19620005096
Harting Electronics & Kg
CONNECTOR ACCESSORY; Assembly Item Name: CABLE GLAND; Material: METAL; Minimum Cable Entry: .5512 inch; MIL Conformity: NO; Maximum Cable Entry: .7087 inch;
08-50-0031
Molex
Molex 08-50-0031 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contact gender, straight mounting style, and compression contact style. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 120.
13697408
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
M23053/16-003-0
TE Connectivity's M23053/16-003-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating b/w -75°C to 150°C. Ideal for various assembly applications requiring high temperature resistance and robust insulation.
ZE05-2022SCF
Hirose Electric
CONNECTOR ACCESSORY;
350690-1
TE Connectivity 350690-1 is a universal mate-n-lok plug and cap housing with crimp terminals. Rated for 600V AC, it has approvals from CSA, UL, and VDE. Featuring stranded construction, it supports wire gauge up to 18 AWG for applications requiring a male power contact design.
19000005190
5-968221-1
TE Connectivity 5-968221-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and operating temperatures from -40 to 120°C.
AWM-3P
Amphenol
7-1452665-1
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
39-00-0022
Molex 39-00-0022 CONTACT features CRIMP terminals for 24-18 AWG wires, with 0.051-0.126 inch cable entry. Made of PHOSPHOR BRONZE, it has a 0.197" length and SQUARE PIN-SOCKET style. Ideal for FEMALE contacts in Assembly Products applications.
5-963715-1
TE Connectivity 5-963715-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, cross section area of 0.75 mm2, and rated current of 7.5 A. Ideal for applications requiring female contact gender and operating temperatures ranging from -40 to 120 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
08-70-0002
CONNECTOR ACCESSORY; Manufacturer Series: 5006;
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
08-70-1030
Molex 08-70-1030 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wires. With 0.051-0.126 inch cable entry, it's ideal for FEMALE connectors in STRAIGHT mounting style. Made of BRASS with SQUARE PIN-SOCKET contact style, it has a 0.197 inch terminal length for secure connections.
08-70-0102
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER COPPER (20); Terminal Length: .154 inch; IEC Conformity: NO; Contact Style: SQUARE PIN-SOCKET; DIN Conformity: NO;
08-70-0056
Molex 08-70-0056 is a female contact with crimp terminal type for 28-22 AWG wires. It has 0.045-0.075 inch cable entry and 0.154 inch terminal length, suitable for 5207-N housing application. Made of brass, it features chain contact design and straight mounting style.
08-70-0064
CONNECTOR ACCESSORY; Maximum Cable Entry: .0669 inch; Material: BRASS; Minimum Wire Size: 28 AWG; IEC Conformity: NO; Maximum Wire Size: 22 AWG;
08-70-0058
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Minimum Wire Size: 28 AWG; Minimum Cable Entry: .045 inch; Maximum Cable Entry: .075 inch; Terminal Type: CRIMP;
08-70-0001
08-70-0057
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Mounting Style: STRAIGHT; Maximum Wire Size: 22 AWG; Contact Style: SQUARE PIN-SOCKET; Assembly Item Name: CONTACT;
08-70-0049
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; IEC Conformity: NO; Minimum Cable Entry: .0472 inch; Contact Gender: FEMALE; Contact Design: LOOSE;
08-70-0042
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Terminal Type: CRIMP; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; DIN Conformity: NO;
08-70-1028
CONNECTOR ACCESSORY; Terminal Length: .196 inch; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; Minimum Cable Entry: .047 inch; Contact Style: SQUARE PIN-SOCKET;
08-70-1029
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Cable Entry: .047 inch; MIL Conformity: NO; Contact Gender: FEMALE; Contact Design: CHAIN;
08-70-0013
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Terminal Type: CRIMP; IEC Conformity: NO; Contact Style: COMPRESSION; Additional Features: CONTACT FINISH: TIN OVER COPPER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved