Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; IEC Conformity: NO; Minimum Cable Entry: .0472 inch; Contact Gender: FEMALE; Contact Design: LOOSE;
Median Price
$0.169
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.067
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$0.140
$0.100
$0.077
Master Electronics
$0.154
Mouser Electronics
$0.220
$0.150
$0.119
$0.109
RS Americas
$0.228
$0.153
$0.125
Newark
$0.233
$0.149
$0.084
DigiKey
$0.250
$0.161
$0.112
$0.102
Verical
$0.035
PEI Genesis
Chip1Stop
$0.128
$0.116
TTI
Digiode
$0.064
Greenchips
$0.065
Vyrian
TME
$0.080
$0.056
$0.048
$0.044
IBS Electronics
$0.189
$0.172
Nova Conductors
VNN
NAC Semi
A2Z Electronics, Inc.
Corphita
$0.060
Continental Prestige Electronics
$0.244
$0.132
Assy Fe
Perfect Parts
Allen Electronics Distributors
$0.131
$0.115
Argo Parts USA
EMSNET (Excess)
Eastek
Aranea Global
Assembly Products 08-70-0049 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-70-0049 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Silicon Group
Gec Plessey Semiconductors
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Crimson Semiconductor
5748676-3
TE Connectivity
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
5205980-4
TE Connectivity's 5205980-4 is a screw retainer kit for metal shell connectors. It supports wire sizes up to 0 AWG, made of carbon steel, and mounts with #4-40 screws. Ideal for assembly products in various industrial applications.
M23053/16-003-0
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
0462-209-16141
TE Connectivity's 0462-209-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 14 AWG wire and rated at 13A. Ideal for POWER applications requiring FEMALE contacts in STRAIGHT mounting style.
1062-16-0644
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
1053251004
Molex
CONNECTOR ACCESSORY;
HDR-E26LPHP+
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2; MIL Conformity: NO; IEC Conformity: NO; Material: PBT RESIN; DIN Conformity: NO;
43031-0003
Molex 43031-0003 CONTACT features CHAIN design, PHOSPHOR BRONZE material. Supports wire sizes 24-20 AWG with 0.073" cable entry. Ideal for 43020, 43640, and 44300 applications requiring male contacts in straight mounting style.
AT60-202-20141
828904-1
TE Connectivity 828904-1 CONTACT features CRIMP terminal type, 0.047" min cable entry, and -40 to 130°C operating temp range. Ideal for applications requiring STRAIGHT mounting style with 0 AWG wire size compatibility.
1123721-1
TE Connectivity's 1123721-1 plug housing has a finish thickness of 55.11, rated voltage of 250V, and terminal type as crimp. Ideal for discrete wire applications, it features a max operating temperature of 105°C and is designed for power use with female contact gender.
685030101
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
3505-28B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
13711546
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Terminal Type: CRIMP; MIL Conformity: NO; Maximum Cable Entry: .063 inch;
9025770000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: FERRULE-STRAIGHT; Approvals (V): CSA; GOST; UL;
1-1469492-9
TE Connectivity 1-1469492-9 is an Assembly Product with max. operating temp. of 105°C and min. of -55°C. Featuring a max wire size of 0 AWG, it has a rated current of 1A and is made of zinc alloy. Ideal for applications requiring right angle mounting style like GUIDE ITEM assembly tasks.
17790000021
Harting Electronics & Kg
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODING ITEM; Material: THERMOPLASTIC; IEC Conformity: NO; MIL Conformity: NO;
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
1SNK900620R0000
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
08-70-1031
CONNECTOR ACCESSORY; Minimum Cable Entry: .051 inch; Terminal Type: CRIMP; Material: BRASS; Maximum Wire Size: 18 AWG; Contact Gender: FEMALE;
08-70-0002
CONNECTOR ACCESSORY; Manufacturer Series: 5006;
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
08-70-1030
Molex 08-70-1030 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wires. With 0.051-0.126 inch cable entry, it's ideal for FEMALE connectors in STRAIGHT mounting style. Made of BRASS with SQUARE PIN-SOCKET contact style, it has a 0.197 inch terminal length for secure connections.
08-70-0102
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER COPPER (20); Terminal Length: .154 inch; IEC Conformity: NO; Contact Style: SQUARE PIN-SOCKET; DIN Conformity: NO;
08-70-0056
Molex 08-70-0056 is a female contact with crimp terminal type for 28-22 AWG wires. It has 0.045-0.075 inch cable entry and 0.154 inch terminal length, suitable for 5207-N housing application. Made of brass, it features chain contact design and straight mounting style.
08-70-0064
CONNECTOR ACCESSORY; Maximum Cable Entry: .0669 inch; Material: BRASS; Minimum Wire Size: 28 AWG; IEC Conformity: NO; Maximum Wire Size: 22 AWG;
08-70-0058
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Minimum Wire Size: 28 AWG; Minimum Cable Entry: .045 inch; Maximum Cable Entry: .075 inch; Terminal Type: CRIMP;
08-70-0001
08-70-0057
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Mounting Style: STRAIGHT; Maximum Wire Size: 22 AWG; Contact Style: SQUARE PIN-SOCKET; Assembly Item Name: CONTACT;
08-70-0048
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; Contact Design: CHAIN; Finish Thickness: 35.43; Terminal Type: CRIMP; Assembly Item Name: CONTACT;
08-70-1029
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Cable Entry: .047 inch; MIL Conformity: NO; Contact Gender: FEMALE; Contact Design: CHAIN;
08-70-0019
CONNECTOR ACCESSORY; Rated Current: 4 A; Terminal Type: CRIMP; Contact Gender: FEMALE; Contact Style: COMPRESSION; Mounting Style: STRAIGHT;
08-70-0059
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: 5102-N, 5207-N, 5208-N, 5209-N; Terminal Length: .154 inch; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG;
08-70-0097
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Terminal Length: .2165 inch; Contact Style: COMPRESSION; Contact Gender: FEMALE;
08-70-0018
CONNECTOR ACCESSORY; Rated Current: 4 A; Contact Style: COMPRESSION; Usage: 5058 HOUSING; Rated AC Voltage: 250 V; Contact Design: CHAIN;
08-70-0098
CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; Mounting Style: STRAIGHT; Minimum Cable Entry: .0472 inch; Contact Style: COMPRESSION; Maximum Wire Size: 22 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved