Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-70-0064 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with 28-22 AWG wire sizes. Suitable for assembly products with 0.0472-0.0669 inch cable entry needs.
Median Price
$0.060
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Misumi USA
1+ parts
$0.017
100+ parts
1k+ parts
-
10k+ parts
DigiKey
$0.150
$0.073
$0.062
PEI Genesis
Powell Electronics
Chip1Stop
Verical
Farnell
Newark
Master Electronics
TTI
TTI Europe
Mouser Electronics
Heilind Electronics
RS (Exports)
$0.053
$0.039
NEP Electronics
Interstate Connecting
Digiode
$0.016
TestEquity
$0.040
TME
$0.120
$0.107
$0.102
IBS Electronics
Vyrian
Rutronik
Sensible Micro Corp
VNN
Nova Conductors
Semicontronic
$0.014
Corphita
$0.015
Aztec Data Supply Inc.
$3.620
Perfect Parts
Assy Fe
EMSNET (Excess)
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Continental Prestige Electronics
Argo Parts USA
Glotronic Ltd.
Bastille Electronics
The thick finish provides durability and ensures long-lasting performance.
Crimp terminals provide a secure connection and easy installation.
Allows for compatibility with various cable sizes for versatile use.
Chain contact design ensures a reliable and consistent connection.
Clearly identifies the purpose of the item in the assembly process.
Supports small wire sizes for a wide range of applications.
Can accommodate larger wire sizes for versatility in use.
Provides flexibility in cable compatibility for different needs.
Female contacts are commonly used for connecting to male counterparts with ease.
Straight mounting style allows for easy installation in various configurations.
Compression contact style ensures a secure and reliable connection.
Brass material offers excellent conductivity and corrosion resistance for a dependable performance.
The longer terminal length provides greater contact area for improved connectivity.
Assembly Products 08-70-0064 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-70-0064 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Taitron Components
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2414-002-1886
TE Connectivity
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
1060-20-0222
TE Connectivity 1060-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current, and operates b/w -55 to 125 °C. Ideal for power applications requiring male gender contacts with 0.051-0.085 inch cable entry.
FMK1G
Fct Electronic
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; Mounting Option-2: SCREW; Maximum Operating Temperature: 100 Cel; Material: ZINC; IEC Conformity: NO;
M23053/5-111-9
Insultab
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
1SET111009R0000
TE Connectivity's 1SET111009R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
0413-204-2005
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; MIL Conformity: NO;
VN020160002(1)
Amphenol
Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.
W3S
W3S by TE Connectivity is an Assembly Product designed for DT SERIES applications. With a temperature range of -55 to 125°C, it supports up to 0 AWG wire size. Made of PBT material, it is ideal for power and signal assemblies requiring high durability.
3030323
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; DIN Conformity: NO; Assembly Item Name: BLOCK; MIL Conformity: NO; IEC Conformity: NO;
DF13-2630SCF(41)
Hirose Electric
CONNECTOR ACCESSORY;
5748677-1
TE Connectivity 5748677-1 is a shielded backshell with polyethylene material. It supports plug/receptacle usage, #4-40 and screw mounting options, and accommodates cables up to 0.32 inch. Operating temperature ranges from -55 to 85 °C, suitable for various assembly applications.
64
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 64;
M23053/5-103-9
Brady
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
66099-4
TE Connectivity 66099-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 16 AWG, rated current of 13A, and operating temperature range from -55 to 150°C. Ideal for power and signal applications requiring male contact gender with brass material.
12089040
Delphi Connection Systems
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
02-09-1104
Molex
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
19200031440
Harting Electronics & Kg
5-1393561-7
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
205980-1
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-RETAINING SCREW; Additional Features: INDIVIDUAL KIT; IEC Conformity: NO;
39-00-0082
The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
08-70-1031
CONNECTOR ACCESSORY; Minimum Cable Entry: .051 inch; Terminal Type: CRIMP; Material: BRASS; Maximum Wire Size: 18 AWG; Contact Gender: FEMALE;
08-70-0002
CONNECTOR ACCESSORY; Manufacturer Series: 5006;
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
08-70-1030
Molex 08-70-1030 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wires. With 0.051-0.126 inch cable entry, it's ideal for FEMALE connectors in STRAIGHT mounting style. Made of BRASS with SQUARE PIN-SOCKET contact style, it has a 0.197 inch terminal length for secure connections.
08-70-0102
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER COPPER (20); Terminal Length: .154 inch; IEC Conformity: NO; Contact Style: SQUARE PIN-SOCKET; DIN Conformity: NO;
08-70-0056
Molex 08-70-0056 is a female contact with crimp terminal type for 28-22 AWG wires. It has 0.045-0.075 inch cable entry and 0.154 inch terminal length, suitable for 5207-N housing application. Made of brass, it features chain contact design and straight mounting style.
08-70-0058
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Minimum Wire Size: 28 AWG; Minimum Cable Entry: .045 inch; Maximum Cable Entry: .075 inch; Terminal Type: CRIMP;
08-70-0001
08-70-0057
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Mounting Style: STRAIGHT; Maximum Wire Size: 22 AWG; Contact Style: SQUARE PIN-SOCKET; Assembly Item Name: CONTACT;
08-70-0049
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; IEC Conformity: NO; Minimum Cable Entry: .0472 inch; Contact Gender: FEMALE; Contact Design: LOOSE;
08-70-0048
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; Contact Design: CHAIN; Finish Thickness: 35.43; Terminal Type: CRIMP; Assembly Item Name: CONTACT;
08-70-1029
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Cable Entry: .047 inch; MIL Conformity: NO; Contact Gender: FEMALE; Contact Design: CHAIN;
08-70-0019
CONNECTOR ACCESSORY; Rated Current: 4 A; Terminal Type: CRIMP; Contact Gender: FEMALE; Contact Style: COMPRESSION; Mounting Style: STRAIGHT;
08-70-0018
CONNECTOR ACCESSORY; Rated Current: 4 A; Contact Style: COMPRESSION; Usage: 5058 HOUSING; Rated AC Voltage: 250 V; Contact Design: CHAIN;
08-70-0098
CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; Mounting Style: STRAIGHT; Minimum Cable Entry: .0472 inch; Contact Style: COMPRESSION; Maximum Wire Size: 22 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved