Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip Technology's USB5742B/2G is a BUS CONTROLLER with 56 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, SPI, and USB bus compatibility for data transfer rates up to 625 MBps. Ideal for applications requiring high-speed data communication in compact spaces with low power consumption.
Median Price
$4.760
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Microchip Technology
1+ parts
$4.710
100+ parts
$3.570
1k+ parts
$3.300
10k+ parts
$3.130
Mouser Electronics
$4.810
$4.550
$3.780
-
NAC Semi
$4.460
$4.040
$3.700
Nova Conductors
$4.990
Vyrian
Ampacity Inc.
$3.740
Continental Prestige Electronics
$4.890
Netroflash
$4.740
$4.641
Microchip USA
$15.820
AZTECH Wire
$16.156
LOOK Integrated Logistics
LMD Electronica
NIA Electronics
Ledger Components
Montano Global Distributors
Argo Parts USA
Surface mount technology allows for easy and reliable installation on circuit boards, making the product suitable for mass production.
The high maximum supply voltage tolerance adds versatility to the product, making it compatible with a wide range of systems.
The square package shape can provide better thermal efficiency and space utilization in electronic designs.
With a large number of terminals, this product can accommodate various input and output connections, enhancing its functionality.
The combination of chip carrier, heat sink/slug, and very thin profile package styles offer optimal heat dissipation and space-saving capabilities in electronic assemblies.
The low minimum supply voltage requirement ensures efficient power consumption and operation in low-power environments.
The high maximum operating temperature tolerance enables reliable performance in various environmental conditions.
The high data transfer rate allows for swift communication and processing, making the product suitable for high-performance applications.
The low minimum operating temperature ensures the product can function effectively even in cold environments.
The quad terminal position provides stable connections and easy integration with other components in the system.
The low maximum seated height profile facilitates compact designs and efficient use of space in electronic assemblies.
The compact width dimension allows for flexible placement within the circuit board layout, offering design versatility.
The high maximum clock frequency supports rapid data processing and communication, essential for high-speed applications.
The short length dimension contributes to space-saving designs and efficient layout arrangements in electronic systems.
The product serves as a versatile bus controller for multiple protocols including I2C, SMBUS, SPI, and USB, making it a universal solution for various connectivity requirements.
Complementary Metal-Oxide-Semiconductor (CMOS) technology offers low power consumption and high noise immunity, enhancing the efficiency and reliability of the product.
The lead-free terminal form prioritizes environmental sustainability and compliance with regulations, making the product eco-friendly.
The nominal supply voltage specification provides a standard operating level for the product, ensuring compatibility in various electronic systems.
Support for multiple bus protocols such as I2C, SMBUS, SPI, and USB enhances the product's versatility and interoperability with different devices and systems.
The small terminal pitch enables dense packing and efficient use of space on the circuit board, contributing to compact and high-performance system designs.
Bus Controllers USB5742B/2G attributes and parameters. Explore more Bus Controllers devices from Microchip Technology
Additional Features:
Address Bus Width:
Bus Compatibility:
Maximum Clock Frequency:
Maximum Data Transfer Rate:
External Data Bus Width:
JESD-30 Code:
Length:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
USB5742B/2G Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - USB5742B 13/May/2022
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
EU2B-YS3103F
Idec
ROTARY SWITCH;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Eic Semiconductor
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
CYUSB3328-88LTXC
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 88; Package Code: HVQCCN; Package Shape: SQUARE;
GL850G-HHY22
Genesys Logic
GL850G-HHY22 by Genesys Logic is a USB bus controller with 28 terminals, operating at 4.5-5.5V and up to 12MHz clock frequency. It offers data transfer rates of up to 60MBps, suitable for various USB applications due to its small outline package and CMOS technology.
FT2232H-56Q-REEL
FTDI's FT2232H-56Q-REEL is a bus controller with 16-bit address bus width, 60 MBps data transfer rate, and 12 MHz clock frequency. Ideal for industrial applications requiring USB, SPI, UART interfacing on devices compatible with RS232/RS422/RS485 standards.
PCI9052G
Plx Technology
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
CP2109-A01-GMR
Silicon Labs
Silicon Labs' CP2109-A01-GMR is a 28-terminal bus controller with 3.3V supply voltage, ideal for industrial applications. This chip carrier package has a square shape and operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount assembly, it is designed for use in various electronic devices requiring reliable data communication.
MAX3421EEHJ+TG2C
MAX3421EEHJ+TG2C by Maxim Integrated is a USB bus controller with 32 terminals, operating at 3-3.6V. It offers data transfer rates up to 1.5 MBps and operates in industrial temperatures (-40 to 85°C). Ideal for applications requiring high-speed USB communication in compact spaces.
MAX3420EECJ/V+T
Analog Devices
MAX3420EECJ/V+T by Analog Devices is a BUS CONTROLLER IC with 32 terminals, operating at 3-3.6V. It supports SPI bus compatibility and has a clock frequency of up to 12.03 MHz. Ideal for industrial applications requiring USB communication in a compact, low-profile package.
USB5744T-I/2GX01
The Microchip Technology USB5744T-I/2GX01 is a BUS CONTROLLER with 56 terminals, operating at 1.08-1.32 V, and supporting data transfer rates up to 625 MBps. It is designed for industrial applications requiring I2C, SMBUS, or SPI bus compatibility in a compact square package measuring 7x7 mm with a max seated height of 1 mm.
FT232RNQ-REEL
FTDI's FT232RNQ-REEL is a 32-terminal bus controller with USB compatibility. It operates b/w -40 to 85 °C, supporting a clock frequency of 12.02 MHz. Ideal for applications requiring low supply voltage and surface mount technology.
USB2512B-AEZG-BYC
USB2512B-AEZG-BYC by Microchip Technology is a bus controller with a max clock frequency of 24 MHz. It is compatible with I2C, SMBUS, and USB buses. This chip is commonly used in applications requiring universal serial bus connectivity.
SC18IS600IBS,128
NXP Semiconductors' SC18IS600IBS,128 is a bus controller with 24 terminals and operates at 2.4-3.6V. It has a clock frequency of 18MHz, suitable for industrial applications requiring I2C communication. The chip carrier package style with a low profile makes it ideal for compact designs in harsh environments.
MCP2210-I/SS
MCP2210-I/SS by Microchip Technology is a small outline, shrink pitch bus controller with 20 terminals. It operates b/w -40 to 85 °C and supports SPI and USB buses. With a max clock frequency of 12 MHz, it offers data transfer rates up to 1.5 MBps for various applications requiring universal serial bus peripherals.
FT4232HPQ-TRAY
FTDI's FT4232HPQ-TRAY is a bus controller with 68 terminals, operating at -40 to 85 °C. It supports I2C, UART, and USB buses with a data transfer rate of 60 MBps. This chip carrier has a square shape, measures 8x8 mm in size, and requires a supply voltage b/w 1.08V to 1.32V for various applications.
TUSB8043ARGCR
Texas Instruments
TUSB8043ARGCR by Texas Instruments is a bus controller with 64 terminals, operating at 0-70°C. It supports data transfer rates up to 625 MBps and has a supply voltage range of 0.99-1.26 V. Ideal for I2C/SMBus applications, this CMOS technology chip carrier is surface-mountable and suitable for commercial-grade temperature environments.
USB5534B-5000JZX
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
USB2502-HT
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
CY7C65213A-32LTXIT
Infineon Technologies
CY7C65213A-32LTXIT by Infineon is a bus controller with 32 terminals, operating at -40 to 85 °C. It supports data transfer rates up to 1.5 MBps and has a supply voltage range of 4.35V to 5.25V. Ideal for industrial applications requiring UART and USB compatibility with RS232, RS422, and RS485 interfaces.
CY7C65213A-28PVXIT
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
PEX8619-BA50BC
BUS CONTROLLER, PCI; Terminal Form: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE; JESD-30 Code: S-PBGA-B324;
CY7C65631-56LTXI
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB5734-I/MR
USB5734-I/MR by Microchip Technology is a BUS CONTROLLER with 64 terminals, operating at -40 to 85 °C. It supports I2C, SMBUS, SPI, UART, and USB buses with a data transfer rate of 625 MBps. This CMOS technology chip has a max clock frequency of 25 MHz and is ideal for industrial applications requiring high-speed data processing.
USB5537B-6070AKZE
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
USB5744-I/2G
Microchip Technology's USB5744-I/2G is a bus controller with 56 terminals, operating at 1.08-1.32V, supporting I2C, SMBUS, and SPI buses. It offers data transfer rates up to 625MBps at a clock frequency of 25MHz. Ideal for industrial applications requiring high-speed USB connectivity in compact spaces.
USB5744/2G
Microchip Technology's USB5744/2G is a BUS CONTROLLER with 56 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, and SPI bus compatibility for data transfer rates up to 625 MBps. Ideal for applications requiring high-speed data communication in commercial temperature environments.
USB5744-I/2GX01
USB5744-I/2GX01 by Microchip Technology is a BUS CONTROLLER with 56 terminals, operating at 1.08-1.32 V, supporting I2C, SMBUS, and SPI buses. It offers a data transfer rate of 625 MBps at a clock frequency of 25 MHz. Ideal for industrial applications requiring high-speed USB connectivity in compact spaces.
USB5744T-I/2G
USB5744T-I/2G by Microchip Tech is a 56-terminal bus controller with max clock freq of 25 MHz. It operates b/w -40 to 85 °C, supporting data transfer rates up to 625 MBps. Ideal for industrial applications requiring USB, I2C, SMBUS, or SPI compatibility in compact designs.
USB5744B-I/2GX01
USB5744B-I/2GX01 by Microchip Technology is a bus controller with a max data transfer rate of 625 MBps. It is compatible with I2C, SMBUS, SPI, and USB buses. This surface mount device has a square package and a terminal pitch of 0.4 mm.
USB5744T/2GX01
Microchip Technology's USB5744T/2GX01 is a BUS CONTROLLER with 56 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, and SPI bus compatibility for data transfer rates up to 625 MBps. Ideal for applications requiring high-speed USB communication in commercial temperature environments.
USB5744T/2G
USB5744T/2G by Microchip Technology is a bus controller with a max data transfer rate of 625 MBps. It has a package style of CHIP CARRIER and is suitable for applications requiring I2C, SMBUS, and SPI bus compatibility.
USB5744/2GX01
Microchip Technology's USB5744/2GX01 is a BUS CONTROLLER with 625 MBps data transfer rate, suitable for I2C, SMBUS, and SPI buses. Operating at 0-70 °C, it has a 25 MHz clock frequency and supports a supply voltage range of 1.08-1.32 V. The chip carrier package style measures 7x7 mm with a very thin profile for surface mount applications.
USB5807C-I/KD
The Microchip Technology USB5807C-I/KD is a BUS CONTROLLER IC with 100 terminals in a SQUARE package. It operates b/w -40 to 85 °C, supporting data rates up to 625 MBps. Ideal for I2C, SMBUS, SPI, and USB bus compatibility applications.
USB5744/2GTB
Microchip Technology's USB5744/2GTB is a bus controller with 56 terminals, operating at 0-70°C. It supports I2C, SMBUS, SPI, and USB buses with a data transfer rate of 625 MBps. The chip carrier package has a low profile of 1mm and operates b/w 1.08-1.32V for various commercial applications.
USB5734T/MR
USB5734T/MR by Microchip Technology is a BUS CONTROLLER with 64 terminals, operating at 1.08-1.32 V. It supports I2C, SMBUS, SPI, UART, USB buses and has a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data transfer in commercial-grade environments at temperatures ranging from 0 to 70 °C.
USB5734/MR
Microchip USB5734/MR is a 64-terminal bus controller with max clock freq of 25 MHz. It supports I2C, SMBUS, SPI, UART & USB buses at 625 MBps data rate. Ideal for commercial applications requiring low power consumption and high-speed data transfer in compact designs.
Microchip Technology's USB5534B-5000JZX is a BUS CONTROLLER IC with 64 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, SPI, and USB buses with a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data communication in commercial temperature range.
USB5744B/2GX01
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Clock Frequency: 25 MHz;
USB5534B-5000JZXTR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved