Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 47; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-N47;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
West Coast Incorporated
1+ parts
100+ parts
1k+ parts
10k+ parts
Network Interfaces RN2483-I/RM attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Width:
RN2483-I/RM Telecommunications trade compliance attributes, and parameters.
ECCN
5A992.C
ECCN Governance
EAR
HTS
8529.90.22.00
SB
8542.39.00.00
PCN Obsolescence/ EOL - RN2483-I 27/Apr/2017
PCN Design/Specification - RN2483 25/Jun/2020 RN2483 07/May/2021
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
Surge Components
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
DP83848MPTBEP
Texas Instruments
DP83848MPTBEP by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -55 to 125 °C, suitable for military-grade applications. The package is a square flatpack with 48 terminals, featuring GULL WING terminal form and 0.5 mm pitch.
ISO1042BDWVR
ISO1042BDWVR by Texas Instruments is an 8-terminal network interface in a small outline package. With a temperature range of -40 to 125°C, it's ideal for automotive applications. Featuring nickel palladium gold terminal finish, it operates at a nominal voltage of 5V.
TJA1040T/VM,118
NXP Semiconductors
NXP Semiconductors' TJA1040T/VM,118 is a CMOS network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in telecom applications. The small outline package with gull wing terminals is surface mountable, making it ideal for compact designs.
KSZ8041FTL
Microchip Technology
Microchip Technology's KSZ8041FTL is a 48-terminal Ethernet transceiver with 100 Mbps data rate. Operating at 0-70°C, it has a supply voltage of 3.3V and consumes up to 58.3mA current. Ideal for network interfaces, this CMOS technology chip comes in a square-shaped thin profile package suitable for surface mounting applications.
KSZ8851SNL
Microchip Technology's KSZ8851SNL is a Network Interface with 32 terminals in a square chip carrier package. Operating temperature range of 0-70°C, CMOS technology, and Ethernet transceiver type make it ideal for commercial telecom applications. Terminal finish in nickel palladium gold ensures high-quality connectivity.
TJA1028TK/5V0/20/J
NXP Semiconductors' TJA1028TK/5V0/20/J is a LIN transceiver with 3.3V supply voltage, AEC-Q100 screening, and -40 to 150°C operating range. It features a small outline package with 8 terminals for automotive network interfaces. Ideal for applications requiring reliable communication in harsh environments.
TLE9252VSKXUMA1
Infineon Technologies
TLE9252VSKXUMA1 by Infineon is a CAN FD transceiver with 5 Mbps data rate, AEC-Q100 screening, and 5V supply voltage. Ideal for automotive applications due to its small outline package and operating temperature range of -40 to 150°C.
MCP2562T-E/SN
MCP2562T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, and -40 to 125°C temp range. Small outline package with 8 terminals, matte tin finish, and TS16949 screening level.
ISO1044BD
ISO1044BD by Texas Instruments is a network interface with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage of 1.8V and max current of 70mA. The package is small outline, rectangular in shape, surface mountable, and has Gull Wing terminals.
PCA82C250T
PCA82C250T by NXP Semiconductors is a network interface IC with 8 terminals, operating at 5V. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package is surface mountable and features a gull wing terminal form.
KSZ9897STXC-TR
Microchip Technology's KSZ9897STXC-TR is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial telecom applications. Terminal finish is matte tin with gull wing form, ideal for surface mount assembly.
KSZ8001L
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ9031MNXCA
KSZ9031MNXCA by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 64 terminals in square chip carrier package suitable for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.
TJA1051T/CM,118
NXP Semiconductors' TJA1051T/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, Gull Wing terminal form, and operates at peak reflow temperature of 260°C.
AR8031-AL1B-R
Qualcomm
Qualcomm's AR8031-AL1B-R is an Ethernet transceiver with 1000 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, 48 terminals, and requires 3.3V supply voltage. Ideal for industrial telecom applications due to its compact size and low power consumption of 113.7 mA.
TJA1028TK/3V3/20/X
NXP Semiconductors' TJA1028TK/3V3/20/X is a LIN transceiver with 8 terminals, operating at -40 to 150°C. It has a supply voltage of 3.3V and max current of 4.5mA, suitable for automotive applications meeting AEC-Q100 standards. This small outline package with heat sink is surface mountable and ideal for telecom networks.
DP83867ISRGZT
DP83867ISRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a terminal pitch of 0.5mm. This network interface IC comes in a square chip carrier package suitable for surface mount applications.
IFX1051LEXUMA1
IFX1051LEXUMA1 by Infineon Technologies is a Network Interface with 8 terminals, operating temperature range of -40 to 125°C. It features a small outline package style and is suitable for automotive applications requiring a 5V supply voltage. The IC type is an interface circuit designed for surface mount assembly with tin terminal finish.
KSZ8081RNDIA-TR
Microchip Technology's KSZ8081RNDIA-TR is a Network Interface IC with 24 terminals, operating at -40 to 85°C. It features Ethernet transceiver for 100 Mbps data rate, suitable for industrial applications. The chip carrier package has a low profile of 0.9mm and matte tin finish, making it ideal for surface mount assembly.
TCAN1042HVDRQ1
TCAN1042HVDRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates at temperatures ranging from -55 to 125°C and has a max supply current of 110 mA. This AEC-Q100 compliant device is ideal for automotive applications due to its small outline package and military-grade temperature rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved