Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-307GE by Lite-on Technology is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 40°, making it ideal for applications requiring green light emission such as indicator lights in electronic devices.
Median Price
$0.121
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.190
100+ parts
$0.092
1k+ parts
$0.067
10k+ parts
$0.052
Mouser Electronics
$0.091
$0.061
$0.050
Future Electronics
-
$0.041
$0.039
Verical
$0.042
Arrow
$0.212
Chip1Stop
Greenchips
$0.034
$0.032
$0.030
$0.028
TME
$0.139
$0.060
$0.043
$0.035
Chip Stock
IBS Electronics
$0.059
$0.095
NAC Semi
$0.083
Schukat
$0.066
Rutronik
$0.047
Vyrian
Electronic Expediters
Q Components
Nova Conductors
Jameco Electronics
Prism Electronics
Diverse Electronics
Corohmni
Aztec Data Supply Inc.
$0.730
Perfect Parts
Argo Parts USA
Continental Prestige Electronics
Aranea Global
SINGLE - This single color LED is easy to control and perfect for projects requiring uniform lighting.
5 mm - The compact size of this LED makes it versatile and suitable for a wide range of applications.
0.03 A - With a low forward current, this LED is energy-efficient and long-lasting.
565 - The specific peak wavelength of 565 nm ensures a vibrant green color output.
TRANSPARENT - The transparent lens helps maximize light output and brightness.
SINGLE COLOR LED - This LED is designed specifically for single color applications, ensuring consistent and accurate color output.
2 - With only 2 terminals, this LED is simple to connect and integrate into projects.
T-1 3/4 - The T-1 3/4 size makes this LED standard and widely compatible for various mounting options.
100 °C - This LED can operate at a high temperature range, suitable for demanding environments.
8.6 mm - The height of this LED provides a good balance between size and luminous intensity.
ROUND - The round shape offers a wide viewing angle, perfect for applications requiring light in multiple directions.
55 °C - With a low minimum operating temperature, this LED can be used in cold environments.
Green - The green color output is vibrant and eye-catching, perfect for visual signals or indicators.
GREEN - This LED emits a bright, consistent green color that is ideal for various lighting applications.
BULK - The bulk packing method is cost-effective for large projects or bulk purchases.
5 V - With a maximum reverse voltage of 5V, this LED is protected from overvoltage situations.
2.54 mm - The standard terminal pitch makes this LED easy to solder into circuit boards.
40° - The 40° viewing angle offers a wide coverage area for illumination.
60.0 - With a high luminous intensity of 60 mcd, this LED is bright and visible.
RADIAL MOUNT - The radial mounting feature allows for secure and easy installation in various setups.
2.6 V - The low forward voltage ensures efficient energy usage and long-term reliability.
Visible LEDs LTL-307GE attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
T-code:
Terminal Pitch:
Viewing Angle:
LTL-307GE Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
General Semiconductor
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
Tak Cheong Electronics Holdings
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
550-5107F
Dialight
Dialight's 550-5107F is a 5mm red LED with max. forward current of 0.025A, peak wavelength of 650nm, and viewing angle of 50°. Ideal for indicator lights in electronics due to its diffused lens, T-1 3/4 size, and radial mount feature.
QTLP650C-7.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
HLMP-3301-F00B2
Broadcom
HLMP-3301-F00B2 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. With a max forward current of 0.03A, it's ideal for applications requiring high efficiency red light emission and has a viewing angle of 60°. Perfect for radial mounting in various electronic devices.
HSME-C191
HSME-C191 by Broadcom is a 1mm green LED with a peak wavelength of 570nm. It has a max forward current of 0.02A and a viewing angle of 170°. This surface mount LED is commonly used in visible light applications requiring high luminous intensity.
ASMB-MTB0-0A3A2
ASMB-MTB0-0A3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. With peak wavelengths of 634/522/465nm, it has a viewing angle of 115° and nominal luminous intensity of 540.0/1600.0/350.0 mcd. Ideal for surface mount applications, it operates b/w -40 to 100 °C, with max forward current at 0.025 A and voltage at 2.6 V.
HLMP-4700
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-4740
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
QTLP650C7TR
Fairchild Semiconductor's QTLP650C7TR LED has a peak wavelength of 660nm and max forward current of 40A. With water-clear lens, it operates b/w -25°C to 80°C. Ideal for applications requiring red light emission with a wide 140° viewing angle.
LGM67K-G1J2-24-0-2-R18-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGM67K-G1J2-24-0-2-R18-Z is a 1.5mm single color LED with peak wavelength of 572nm and viewing angle of 120°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 4.45mcd.
LGR971-KN-1-0-20-R18
Osram Opto Semiconductors' LGR971-KN-1-0-20-R18 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light at 26.05mcd luminous intensity. Ideal for surface mount applications with a wide 160° viewing angle and operating temperature range from -30 to 85 °C.
LST676-R1S1-1-Z
Osram Opto Semiconductors' LST676-R1S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 168.0mcd, making it suitable for various lighting solutions.
SML-A12DTT86
ROHM
ROHM's SML-A12DTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 611nm, forward current of 0.03A, and luminous intensity of 100.0mcd. Ideal for surface mount applications in visible LEDs category, especially in devices requiring amber/orange light emission at temperatures ranging from -40 to 85°C.
TLDR5400
Vishay Intertechnology
TLDR5400 by Vishay Intertechnology is a 5mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.05A and emits DEEP RED light. Ideal for applications requiring a viewing angle of 60°, such as indicator lights in electronic devices.
598-8040-107F
The Dialight 598-8040-107F is a single color LED with a size of 1.1 mm and a max forward current of 0.025 A. It is commonly used in surface mount applications for its water clear lens and yellow color.
SSL-LXA3025IGC-TR
Lumex
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
HLMP-1503-D0000
Hewlett Packard
SINGLE COLOR LED; Size: 3 mm; Maximum Forward Current: .03 A; Shape: ROUND; T-code: T-1; No. of Functions: 1;
HSMW-C265
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3.9 V; JESD-609 Code: e0;
HLMP-3507-EF000
HLMP-3507-EF000 by Broadcom is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging.
570-0100-111F
Dialight's 570-0100-111F is a single color LED array with separate, 3-element configuration. It has a peak wavelength of 627/590nm and max forward current of 0.03A. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
MLCAWT-H1-0000-000XE3
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-000XE3 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-307Y-011A
Lite-on Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 29.0; Lens Type: DIFFUSED; Size: 5 mm;
LTL-307EE
LTL-307EE by Lite-on Technology is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and high efficiency red color at wavelength. Ideal for applications requiring a visible light source with radial mount, such as indicator lights in electronic devices.
LTL307EE
Taiwan Liton Electronic C
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.3; Lens Type: TRANSPARENT; Maximum Operating Temperature: 100 Cel;
LTL-307P
LTL-307P by Lite-on Technology is a 5mm round, diffused red LED with a peak wavelength of 697nm. It has a max forward current of 0.015A and a viewing angle of 50°. This LED is commonly used in applications that require bright red illumination, such as signage or indicator lights.
LTL307P
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.6; Lens Type: DIFFUSED; Minimum Luminous Intensity: .0011 cd;
LTL-307EE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: RED TRANSPARENT; Packing Method: TR;
LTL-307G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL307G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Packing Method: BULK;
LTL-307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; Size: 5 mm;
LTL307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Viewing Angle: 50 deg;
LTL-307GE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: TRANSPARENT; T-code: T-1 3/4;
LTL-30EHJ
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 40/29; Lens Type: DIFFUSED WHITE; Size: 5 mm;
LTL307GE
LTL307GE by Taiwan Liton Electronic C is a 5mm round green LED with a transparent lens. It has a max forward current of 0.03A and a peak wavelength of 565nm. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-307ELC
LTL-307ELC by Lite-on Technology is a 5mm single color LED with diffused red lens. It has a peak wavelength of 635nm, forward current of 0.007A, and max forward voltage of 2.2V. Ideal for applications requiring high efficiency red light emission in a compact form factor.
LTL-307GLC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL307ELC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED RED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-307EE-051A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: TRANSPARENT RED; No. of Functions: 1;
LTL-307YE-012A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: TRANSPARENT; Size: 5 mm;
LTL-307GM2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Packing Method: BULK;
LTL-307KK-012A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: WATER CLEAR; Viewing Angle: 40 deg;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved