Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL307G by Taiwan Liton Electronic C is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 50°. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
Median Price
$0.060
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Future Electronics
1+ parts
$0.043
100+ parts
-
1k+ parts
10k+ parts
$0.038
Mouser Electronics
$0.190
$0.088
$0.058
$0.050
DigiKey
$0.065
Verical
$0.066
Chip1Stop
$0.044
Edge Electronics
Arrow
$0.053
$0.036
Nova Conductors
$0.064
Freelance Electronics
$0.115
$0.138
$0.114
Component Electronics Inc.
$0.140
$0.130
IBS Electronics
$0.055
NAC Semi
$0.067
Q Components
Vyrian
Chip Stock
TME
$0.049
$0.046
$0.039
Diverse Electronics
Prism Electronics
Bristol Electronics
Atlantic Semiconductor
EMSNET
Sensible Micro Corp
$0.029
$0.027
Legend Electronics Inc.
Rutronik
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Electronics Depot
Connector Distribution Corp
Right Parts Inc.
Extreme Components
Quantum Digital Technology
Semtec, LLC
Resion
J2 Sourcing AB
A2Z Electronics, Inc.
American Connector Supply Corp
Mil-Aero Solutions, Inc.
Bastille Electronics
$0.061
$0.057
Continental Prestige Electronics
$0.063
Argo Parts USA
$0.062
Netroflash
Corohmni
Aztec Data Supply Inc.
$0.360
Benley Electronics
$0.750
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Speed Components Ltd (Excess)
Single configuration makes it easier to control and use in various applications.
A compact size that can fit into small spaces and be easily integrated into designs.
Efficient energy consumption with a low forward current requirement.
Optimal wavelength for green light emission, providing a bright and clear output.
Diffused lens helps in spreading the light evenly, creating a soft and uniform illumination.
Designed specifically for emitting green light, ensuring consistent color output.
Simplified connection with only two terminals, making installation easier.
Standardized size for compatibility with various mounting options and sockets.
Can withstand high temperatures, suitable for diverse environmental conditions.
Low profile design for versatility in placement and application.
Classic round shape for a traditional appearance and easy mounting.
Capable of functioning in extremely cold conditions without compromising performance.
Even at low luminous intensity, it provides visibility and illumination in dark environments.
Desired green color output for specific applications or design requirements.
Bulk packing is cost-effective and ideal for large-scale projects or manufacturers.
Withstands up to 5V in reverse polarity, protecting the LED from damage.
Standard terminal pitch for compatibility with common sockets and connectors.
Wide viewing angle for better visibility and illumination coverage.
Moderate luminous intensity for a balanced brightness level in various applications.
Radial mount for secure and stable installation in different equipment or devices.
Efficient operation with low forward voltage, reducing power consumption.
Visible LEDs LTL307G attributes and parameters. Explore more Visible LEDs devices from Taiwan Liton Electronic C
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
T-code:
Terminal Pitch:
Viewing Angle:
LTL307G Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
NSN
5980-01-480-5925, 5980014805925
NIIN
014805925
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LWP4SG-V2AB-JKPL-1
Osram Opto Semiconductors
Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.
SML-LX0603SRW-TR
Lumex
SML-LX0603SRW-TR by Lumex is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications, it emits red light with luminous intensity of 15.0mcd.
HLMP-1301-E00A2
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-210MTT86
ROHM
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
LGR971-LM
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
OVM12F3W7
Optek Technology
SINGLE COLOR LED;
LTST-C190TBKT-5A
Lite-on Technology
LTST-C190TBKT-5A by Lite-on Technology is a 1.1mm BLUE LED with 0.02A current, peak wavelength of 468nm, and 130° viewing angle. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C temperatures and has a luminous intensity of 28.1mcd.
LGA67K-G2K1-24-Z
Osram Opto Semiconductors' LGA67K-G2K1-24-Z is a single color LED with a peak wavelength of 572nm and a max forward current of 0.02A. It has a round shape, measures 2.4mm in size, and is suitable for surface mount applications requiring a green light source with a viewing angle of 120°.
LGM67K-G1J2-24-Z
Osram Opto Semiconductors' LGM67K-G1J2-24-Z is a 1.5mm single-color LED with peak wavelength of 572nm, emitting green light. It has a max forward current of 0.02A and viewing angle of 120°, suitable for surface mount applications in various electronic devices.
LSA676-P2S1-1
Osram Opto Semiconductors' LSA676-P2S1-1 is a 2.4mm SINGLE COLOR LED with peak wavelength of 645nm and viewing angle of 120°. Ideal for surface mount applications, it has a max forward current of 0.03A and nominal luminous intensity of 140.0mcd, making it suitable for various lighting solutions.
CMD17-21VGD/TR8
Visual Communications Company
CMD17-21VGD/TR8 by Visual Communications Company is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm and green color. It has a max forward current of 0.03A, viewing angle of 140°, and surface mounting feature. Ideal for applications requiring low luminous intensity in compact spaces.
XHP35A-00-0000-0D0BD440E
Wolfspeed
Wolfspeed's XHP35A-00-0000-0D0BD440E is a 2.8mm high SINGLE COLOR LED with max forward current of 1.05A and min luminous intensity of 125cd. Ideal for applications requiring white light at a wavelength, with max forward voltage of 11.9V and reverse voltage of 5V.
TLCR5800
Telefunken Microelectronics
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Color At Wavelength: Orange;
MSL0402RGBU1
ROHM's MSL0402RGBU1 is a triple color LED with separate 3-element configuration. It has a max forward current of 0.03A and nominal luminous intensity of 400/550/180 mcd. Ideal for surface mount applications, this RGB LED operates b/w -40 to 85°C, making it suitable for various lighting and display projects.
VLMC3100-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMC3100-GS08 is a 2.4mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
MLCAWT-A1-0000-000X51
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Luminous Intensity: 120 cd; Color At Wavelength: White; Viewing Angle: 120 deg;
HSMH-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KPHHS-1005SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
3040
Wilbrecht Electronics
150060RS75000
Wuerth Elektronik & Kg
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-307Y-011A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 29.0; Lens Type: DIFFUSED; Size: 5 mm;
LTL-307EE
LTL-307EE by Lite-on Technology is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and high efficiency red color at wavelength. Ideal for applications requiring a visible light source with radial mount, such as indicator lights in electronic devices.
LTL307EE
Taiwan Liton Electronic C
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.3; Lens Type: TRANSPARENT; Maximum Operating Temperature: 100 Cel;
LTL-307P
LTL-307P by Lite-on Technology is a 5mm round, diffused red LED with a peak wavelength of 697nm. It has a max forward current of 0.015A and a viewing angle of 50°. This LED is commonly used in applications that require bright red illumination, such as signage or indicator lights.
LTL307P
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.6; Lens Type: DIFFUSED; Minimum Luminous Intensity: .0011 cd;
LTL-307EE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: RED TRANSPARENT; Packing Method: TR;
LTL-307G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; Size: 5 mm;
LTL307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Viewing Angle: 50 deg;
LTL-307GE
LTL-307GE by Lite-on Technology is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 40°, making it ideal for applications requiring green light emission such as indicator lights in electronic devices.
LTL-307GE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: TRANSPARENT; T-code: T-1 3/4;
LTL-30EHJ
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 40/29; Lens Type: DIFFUSED WHITE; Size: 5 mm;
LTL307GE
LTL307GE by Taiwan Liton Electronic C is a 5mm round green LED with a transparent lens. It has a max forward current of 0.03A and a peak wavelength of 565nm. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-307ELC
LTL-307ELC by Lite-on Technology is a 5mm single color LED with diffused red lens. It has a peak wavelength of 635nm, forward current of 0.007A, and max forward voltage of 2.2V. Ideal for applications requiring high efficiency red light emission in a compact form factor.
LTL-307GLC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL307ELC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED RED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-307GLC-021
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED; Packing Method: TR;
LTL-307RE
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-307E-112A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; Packing Method: TR;
LTL-307PA
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.6; Lens Type: DIFFUSED RED; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved