Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTST-C190EKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 630nm, ideal for applications requiring RED light emission. With a max forward current of 0.03A and viewing angle of 130°, it's suitable for surface mount installations in various electronic devices. Operating temperature range from -55 to 85 °C ensures reliable performance in diverse environments.
Median Price
$0.032
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Arrow
1+ parts
$0.026
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.210
$0.063
$0.044
$0.033
DigiKey
$0.036
Chip1Stop
$0.023
Verical
$0.029
RS (Exports)
$0.061
$0.048
Freelance Electronics
$0.035
Nova Conductors
$0.089
Component Electronics Inc.
$0.310
$0.230
$0.200
SPM Sales
Diverse Electronics
Chip Stock
Vyrian
Bristol Electronics
R&J Components
Electronics Depot
IBS Electronics
$0.266
NAC Semi
$0.031
Atlantic Semiconductor
LIBRA Elektronik GmbH
Contempo Components LLC
Sunrise Surplus Inc.
Connector Distribution Corp
Right Parts Inc.
Pegasus Components GmbH
Prism Electronics
ComSIT Distribution GmbH
Semicontronic
$0.020
$0.019
Corohmni
$0.046
Aranea Global
$0.087
$0.084
Continental Prestige Electronics
Argo Parts USA
$0.086
Aztec Data Supply Inc.
$0.430
Perfect Parts
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Formix International (Excess)
Single configuration allows for easy integration into various circuit designs and applications.
Compact size makes it suitable for applications where space is limited.
Can handle a maximum forward current of 0.03 A, ensuring reliable performance under normal operating conditions.
Peak wavelength of 630 nm provides a specific color output, making it ideal for applications requiring consistent color accuracy.
Water-clear lens type ensures a high level of brightness and visibility for the LED.
Single color LED simplifies circuit design and offers a consistent color output for various applications.
High maximum operating temperature of 85°C ensures reliable performance in a wide range of environmental conditions.
Low profile height of 0.8 mm allows for easy integration into compact electronic devices.
Rectangular shape offers a streamlined design that can fit neatly into various product designs.
Low minimum operating temperature of -55°C ensures functionality even in harsh environmental conditions.
Pure tin terminal finish provides good conductivity and solderability for reliable connections.
Orange-red color at peak wavelength offers a vibrant and distinct output for visual applications.
Red color output is commonly used and easily recognizable in various applications.
TR, 7-inch packing method ensures convenient handling and storage for mass production or distribution.
High maximum reverse voltage of 5 V offers protection against reverse polarity and ensures safety in circuit design.
Terminal pitch of 1.5 mm provides ample space for soldering and secure connections in circuit boards.
Wide viewing angle of 130° ensures excellent visibility from different viewing positions.
Nominal luminous intensity of 3.0 mcd offers a bright and visible light output for various applications.
Surface mounting feature allows for easy and secure installation onto PCBs or other surfaces.
Low maximum forward voltage of 2.6 V allows for energy-efficient operation and prolongs the lifespan of the LED.
Visible LEDs LTST-C190EKT attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTST-C190EKT Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - Mult Dev Dice Mat Chg 1/Sep/2021
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SML-LX15IGC-RP-TR
Lumex
SML-LX15IGC-RP-TR by Lumex is a 3mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm, suitable for surface mount applications in visible LED displays.
SSL-LXA228SYC-TR31
SSL-LXA228SYC-TR31 by Lumex is a 1.9mm single color LED with peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring a super yellow light source, such as indicator lights in electronic devices. Features surface mounting method and clear lens type.
OVLLG8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
CMD15-21UBC/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 45.0; Lens Type: CLEAR; Size: 2 mm;
XHP35B-00-0000-0D0BE20E3
Wolfspeed
SINGLE COLOR LED;
SML-LXL1209SIC-TR
The Lumex SML-LXL1209SIC-TR is a 1.8mm WATER CLEAR LED with peak wavelength of 636nm and luminous intensity of 600.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85°C, drawing 0.03A current.
555-3008F
Dialight
Dialight's 555-3008F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0038A, and operates b/w -55 to 100°C. Ideal for applications requiring red diffused light emission in compact spaces.
LTL-4231NLC
Lite-on Technology
LTL-4231NLC by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
APT1608SRCPRV
Kingbright Electronic
Kingbright Electronic's APT1608SRCPRV is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-S326KGJRKT
LTST-S326KGJRKT by Lite-on Technology is a 2mm dual-color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 639nm (super red) and 574nm (green). Ideal for surface mount applications, this LED offers a viewing angle of 130° and nominal luminous intensity of 25/35mcd, suitable for various lighting projects.
HSMF-C164
Agilent Technologies
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LGR971-Z
Osram Opto Semiconductors
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
HLMP-1790
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
551-3009F
The Dialight 551-3009F is a 3mm SINGLE DUAL COLOR LED with peak wavelengths of 635nm (Red) and 565nm (Green). It has a max forward current of 0.045A, forward voltage of 2V, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 50° in bulk packaging for radial mounting.
LGQ971-KN-1
The Osram Opto Semiconductors LGQ971-KN-1 is a 1mm single color LED with peak wavelength of 572nm. It has a max forward current of 0.025A and operates b/w -30°C to 85°C. Ideal for surface mount applications, emitting green light at a wide viewing angle of 160°.
LTST-C191TBKT-5A
Visible LEDs;
HLMP-1301-E00A1
Broadcom
HLMP-1301-E00A1 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging.
OVSA1SBC2R8
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 1600.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
Cree Led
QTLP650C24TR
Everlight Electronics
Visible LEDs; Lens Type: WATER CLEAR; Viewing Angle: 0 deg; Color At Wavelength: Green/Orange-Red; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTST-C190GKT
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
LTST-C191KGKT
LTST-C191KGKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and ultra bright green color. It has a max forward current of 0.03A, viewing angle of 130°, and nominal luminous intensity of 44.5mcd. Ideal for surface mount applications in electronics requiring high brightness green-yellow illumination.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
LTST-C191KRKT
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-C19HE1WT
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
LTST-C170KRKT
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C193TBKT-5A
LTST-C193TBKT-5A by Lite-on Technology is a 1.15mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LTST-C191KRKT-5A
LTST-C171KGKT
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
LTST-C193KRKT-5A
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved