Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-307ELC by Lite-on Technology is a 5mm single color LED with diffused red lens. It has a peak wavelength of 635nm, forward current of 0.007A, and max forward voltage of 2.2V. Ideal for applications requiring high efficiency red light emission in a compact form factor.
Median Price
$0.420
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.203
1k+ parts
$0.153
10k+ parts
$0.124
Mouser Electronics
$0.142
$0.122
Arrow
-
Verical
$0.051
Nova Conductors
$0.130
TME
$0.311
$0.076
$0.054
$0.047
LIBRA Elektronik GmbH
Chip Stock
Schukat
$0.062
$0.032
$0.031
Vyrian
SPM Sales
Prism Electronics
Micros
$0.095
Connector Distribution Corp
Right Parts Inc.
ABC Electronics Ltd.
Classic Components Corporation
GES GmbH
Continental Prestige Electronics
$0.128
Argo Parts USA
$0.126
Netroflash
$0.121
QUARKTWIN TECHNOLOGY LTD
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Perfect Parts
Single configuration allows for easy and straightforward installation and operation.
Compact size makes it suitable for various applications where space is limited.
Low forward current consumption helps in reducing power consumption and extending the product's lifespan.
Peak wavelength of 635nm ensures a bright and vivid red light output.
Diffused lens type provides a wider viewing angle and more uniform light distribution.
Single color LED design simplifies the use and integration of the product in various lighting applications.
Having only 2 terminals makes it easy to connect and use in circuits.
High maximum operating temperature ensures stability and reliability in various environmental conditions.
Moderate height makes it suitable for mounting in different types of light fixtures.
Round shape provides a traditional and versatile design that can be easily integrated into various applications.
Low minimum operating temperature allows for reliable performance even in cold environments.
Tin/Lead terminal finish ensures good conductivity and solderability for easy installation.
The specified color at the wavelength ensures the desired visual output for red lighting applications.
High efficiency red color provides a bright and energy-efficient lighting solution.
Bulk packing method is cost-effective and suitable for customers requiring larger quantities.
Standard terminal pitch allows for easy compatibility with common electronic components and circuit boards.
Wide viewing angle of 50° ensures good visibility and coverage.
Decent luminous intensity of 3.7 mcd provides a bright output for various lighting applications.
Radial mounting feature allows for easy and secure installation in various light fixtures and boards.
Low forward voltage requirement of 2.2 V ensures energy efficiency and compatibility with common power sources.
Visible LEDs LTL-307ELC attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTL-307ELC Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Mult Dev Supply Chgs 6/Nov/2020
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Surge Components
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Hitachi
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Hitano Enterprise
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
S4WM-2296409051-0E000K3S-00001
Seoul Semiconductor
Seoul Semiconductor's S4WM-2296409051-0E000K3S-00001 is a 22mm COB LED with max. forward current of 1.85A and voltage of 50.7V. Ideal for surface mount applications, it emits neutral white light at a wide 118° viewing angle, suitable for various lighting designs.
HLMP4700
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 8.6 mm; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Red;
LSR976-NR-1-0-20-R18
Osram Opto Semiconductors
LSR976-NR-1-0-20-R18 by Osram Opto Semiconductors is a 1.4mm single color LED with peak wavelength of 645nm and max forward current of 0.025A. Ideal for applications requiring super red light emission, it has a viewing angle of 160° and operates b/w -30°C to 85°C temperatures.
SML-P11UTT86RH
ROHM
ROHM SML-P11UTT86RH is a 0.6mm SINGLE COLOR LED with 1.8V max forward voltage, ideal for applications requiring red light emission. With a max forward current of 0.02A and operating temperature range from -40 to 85°C, it offers high luminous intensity at 2.05mcd in a compact square shape for surface mount assembly.
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
L-937EGW
Kingbright Electronic
L-937EGW by Kingbright Electronic is a 3mm dual color LED with common bipolar terminal. It has a max forward current of 0.03A and peak wavelengths of 627nm/565nm, suitable for applications requiring high efficiency red/green light emission. With a diffused white lens and radial mount feature, it offers a viewing angle of 60° and nominal luminous intensity of 20.0mcd.
QTLP650C7TR
Fairchild Semiconductor's QTLP650C7TR LED has a peak wavelength of 660nm and max forward current of 40A. With water-clear lens, it operates b/w -25°C to 80°C. Ideal for applications requiring red light emission with a wide 140° viewing angle.
XHP70B-00-0000-0D0HP20E3
SINGLE COLOR LED;
HLMP-6300-F0011
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-1301-E00A1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-1503-D0000
Hewlett Packard
SINGLE COLOR LED; Size: 3 mm; Maximum Forward Current: .03 A; Shape: ROUND; T-code: T-1; No. of Functions: 1;
KP-2012SURC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
551-0607-004F
Dialight
Dialight's 551-0607-004F is a 3mm green LED array with 4 separate elements. It has a peak wavelength of 565nm, forward current of 0.02A, and max voltage of 7.5V. Ideal for applications requiring high luminous intensity and a wide viewing angle in industrial settings.
1300
Microprecision Electronics Sa
KP-1608CGCK
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
SML-D12U8WT86Q
ROHM SML-D12U8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting RED light at 63.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens for uniform light dispersion.
L-934GD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Configuration: SINGLE;
HLMP-1503
Broadcom
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: DIFFUSED; Terminal Finish: MATTE TIN;
HLMP-1719
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Color: YELLOW;
XHP35B-00-0000-0D0BD430E
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-307Y-011A
Lite-on Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 29.0; Lens Type: DIFFUSED; Size: 5 mm;
LTL-307EE
LTL-307EE by Lite-on Technology is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and high efficiency red color at wavelength. Ideal for applications requiring a visible light source with radial mount, such as indicator lights in electronic devices.
LTL307EE
Taiwan Liton Electronic C
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.3; Lens Type: TRANSPARENT; Maximum Operating Temperature: 100 Cel;
LTL-307P
LTL-307P by Lite-on Technology is a 5mm round, diffused red LED with a peak wavelength of 697nm. It has a max forward current of 0.015A and a viewing angle of 50°. This LED is commonly used in applications that require bright red illumination, such as signage or indicator lights.
LTL307P
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.6; Lens Type: DIFFUSED; Minimum Luminous Intensity: .0011 cd;
LTL-307EE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: RED TRANSPARENT; Packing Method: TR;
LTL-307G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL307G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Packing Method: BULK;
LTL-307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; Size: 5 mm;
LTL307E
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Viewing Angle: 50 deg;
LTL-307GE
LTL-307GE by Lite-on Technology is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 40°, making it ideal for applications requiring green light emission such as indicator lights in electronic devices.
LTL-307GE-012
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: TRANSPARENT; T-code: T-1 3/4;
LTL-30EHJ
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 40/29; Lens Type: DIFFUSED WHITE; Size: 5 mm;
LTL307GE
LTL307GE by Taiwan Liton Electronic C is a 5mm round green LED with a transparent lens. It has a max forward current of 0.03A and a peak wavelength of 565nm. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-307GLC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL307ELC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.7; Lens Type: DIFFUSED RED; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-307E-041A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; T-code: T-1 3/4;
LTL-307E-0L1A
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED RED; No. of Functions: 1;
LTL-307ENF-3
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED RED; No. of Functions: 1;
LTL-307EP2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.7; Lens Type: DIFFUSED RED; Maximum Forward Current: .03 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved