Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: VSON; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Vyrian
Nova Conductors
Ampacity Inc.
$3.000
AZTECH Wire
$11.307
Semicontronic
$17.000
$16.575
$16.490
One Stop Electronics
$18.000
MARBEL Systems
$62.315
$59.822
Corohmni
$65.038
Texas Native Microelectronics
$71.626
$68.761
$66.612
Parana Technologies
$79.572
$74.002
IDEA Electronic Components Group
$85.561
$81.283
Kenton Components
$85.951
$75.637
DigiPath Technology Company
$133.475
$128.136
Corphita
Continental Prestige Electronics
Argo Parts USA
Qasali Group International
$185.655
$170.183
Kepictronics
Aranea Global
Other Function uPs,uCs & Peripheral ICs LTC4263IDE attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Linear Technology
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
LTC4263IDE Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
D2-45057-QR-T
Renesas Electronics
Renesas Electronics D2-45057-QR-T is a System on Chip with 68 terminals, CMOS technology, and 1.8V nominal voltage. It operates b/w -10 to 85 °C and has a package style of CHIP CARRIER. Ideal for applications requiring low power consumption and compact design in various electronic devices.
AM4378BZDN100
AM4378BZDN100 by Texas Instruments is a System on Chip with 491 terminals in a low profile, fine pitch grid array package. It operates b/w 0-90°C with supply voltage range of 1.272-1.378V, making it ideal for embedded applications requiring high performance and compact design.
NRF52811-QFAA-R7
Nordic Semiconductor Asa
NRF52811-QFAA-R7 by Nordic Semiconductor is a 48-terminal microprocessor circuit with CMOS technology. It operates b/w -40 to 85 °C and supports supply voltage range of 1.7V to 3.6V. Ideal for applications requiring low-profile, surface-mountable chips in various electronic devices.
EFR32MG21A020F1024IM32-B
Silicon Labs
EFR32MG21A020F1024IM32-B by Silicon Labs is a 32-terminal, CMOS System on Chip with a supply voltage range of 1.71V to 3.8V. Ideal for automotive applications, it operates b/w -40°C to 125°C and features a compact square package style with matte tin finish for surface mount assembly.
XC7Z045-2FBG676E
Xilinx
XC7Z045-2FBG676E by Xilinx is a System on Chip with CMOS technology. It operates b/w 0-100°C, with supply voltage ranging from 0.95V to 1.05V. With 676 terminals in a square grid array package, it's ideal for various applications requiring high-performance processing capabilities.
SE050C1HQ1/Z01SCZ
SE050C1HQ1/Z01SCZ by NXP Semiconductors is a cryptographic authenticator IC with CMOS technology. It operates b/w -25 to 85 °C, with supply voltage range of 1.62V to 3.6V. This quad-terminal chip carrier is ideal for secure applications requiring high-level authentication and encryption.
CC-WMX-J97C-TN
Digi International
CC-WMX-J97C-TN by Digi International is a 400-terminal microprocessor circuit with CMOS technology. It operates b/w -20°C to 70°C, in a square grid array package style measuring 50mm x 50mm. Ideal for applications requiring high-performance processing in compact spaces.
DS8007-ENG
Maxim Integrated
DS8007-ENG by Maxim Integrated is a MICROPROCESSOR CIRCUIT with 48 terminals, operating at 2.7-6V, ideal for industrial applications. It features a FLATPACK package style, GULL WING terminal form, and operates b/w -40 to 85 °C. Suitable for various Other Function uPs,uCs & Peripheral ICs needs due to its low profile design and CMOS technology.
SLB9670XQ20FW785XUMA1
Infineon Technologies
SLB9670XQ20FW785XUMA1 by Infineon: 32-terminal IC with CMOS tech, 1.65-1.95V supply, -40 to 85°C temp range. Ideal for industrial cryptographic authentication applications due to its compact square chip carrier package and low profile design.
MGM210PA32JIA2R
SYSTEM ON CHIP;
CY8C4024AZI-S413T
Cypress Semiconductor
PROGRAMMABLE SoC; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE; Terminal Finish: PURE TIN;
XC7Z035-2FBG676I
The Xilinx XC7Z035-2FBG676I is a System on Chip with CMOS technology. It operates b/w -40 to 100°C, with supply voltage ranging from 0.95V to 1.05V. Featuring a grid array package style, it's ideal for applications requiring high-performance processing in compact spaces.
MCIMX6Y2CVM05ABR
MCIMX6Y2CVM05ABR by NXP Semiconductors is a low-profile, fine-pitch grid array SoC with 289 terminals. Operating at -40 to 105°C, it supports a voltage range of 1.275-1.5V and features tin silver copper terminal finish. Ideal for industrial applications requiring high-performance computing in compact spaces.
XCZU7EV-3FFVC1156E
XCZU7EV-3FFVC1156E by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w 0-100 °C, with supply voltage range of 0.873-0.927 V. This GRID ARRAY package is ideal for applications requiring high-performance processing in compact form factors.
EFR32BG24B220F1024IM48-BR
EFR32BG24B220F1024IM48-BR by Silicon Labs is a SoC with 48 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 1.71V to 3.8V and comes in a square chip carrier package style. Ideal for IoT devices, wearables, and smart home applications due to its compact size and low power consumption.
MC13213R2
Freescale Semiconductor
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 71; Package Code: VFLGA; Package Shape: SQUARE;
5CSEBA6U19I7N
Intel
SoC;
MIMX8MN6DVTJZAA
The NXP Semiconductors MIMX8MN6DVTJZAA is a low-profile, fine-pitch grid array SoC with 486 terminals. Operating b/w 0-95°C, it has a supply voltage range of 0.95-1.05V and peak reflow temperature of 260°C. Ideal for applications requiring high-performance computing in compact spaces.
MIMXRT1172CVM8A
NXP Semiconductors' MIMXRT1172CVM8A is a low-profile, fine-pitch SoC with 289 terminals. Operating b/w -40 to 105°C, it supports a supply voltage range of 1.1-1.15V. Ideal for applications requiring high-performance uPs/uCs in compact form factors.
AS5040ASSU
Ams Ag
Other uPs/uCs/Peripheral ICs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC4263IS#PBF
Linear Technology
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Analog Devices
LTC4263IDE#PBF
LTC4263IDE#PBF by Analog Devices is a MICROPROCESSOR CIRCUIT with 14 terminals, operating b/w -40 to 85 °C. It has a supply voltage range of 4.5-5.5 V and comes in a small outline package suitable for industrial applications requiring CMOS technology.
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR;
LTC4263CS#PBF
MICROPROCESSOR CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LTC4263IDE-1#PBF
LTC4263IDE-1#TRPBF
LTC4263IS#TRPBF
LTC4263IS#TRPBF by Analog Devices is a small outline peripheral IC with 14 terminals. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 4.5V to 5.5V, it is designed for microprocessor circuits in various electronic devices.
LTC4263CDE#TRPBF
MICROPROCESSOR CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR;
LTC4263IDE
LTC4263IS
LTC4263IS by Analog Devices is a small outline, surface mount peripheral IC with 14 terminals. It operates at a supply voltage range of 4.5V to 5.5V and has an industrial temperature grade of -40°C to 85°C. This microprocessor circuit is commonly used in various applications requiring CMOS technology and gull wing terminal form.
LTC4263IS#TR
LTC4263CDE#TR
MICROPROCESSOR CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: VSON; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved