Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE4997A8XUMA1 by Infineon is a magnetic field sensor with a supply voltage range of 4.5-5.5V and output current up to 1A. It operates in temperatures from -40 to 125°C, with a magnetic field range of -50 to 200mT. Ideal for applications requiring precise digital current output sensing in compact designs.
Median Price
$3.480
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$3.110
100+ parts
$1.950
1k+ parts
$1.330
10k+ parts
-
Chip1Stop
$3.300
$2.440
$2.090
$2.010
DigiKey
$2.590
$2.305
$2.213
Newark
$4.050
$3.010
$2.690
Mouser Electronics
$4.080
$2.930
$2.510
$2.400
RS (Exports)
$4.955
$4.008
Element14
$5.490
$4.040
$2.910
$2.660
Verical
$2.391
Rochester
$1.810
$1.620
$1.520
Digiode
$1.900
Nova Conductors
$3.050
Vyrian
IBS Electronics
$2.679
DigiKey Marketplace
Semicontronic
$1.700
$1.658
$1.649
Ampacity Inc.
Corphita
$1.800
Argo Parts USA
Modulus Dynamics
$3.130
$3.005
$2.880
Corohmni
Aztec Data Supply Inc.
$3.160
iodParts Technologies Inc.
Continental Prestige Electronics
$2.530
$1.960
Infinite Electronics LLP (Excess)
Netroflash
$2.989
$2.897
$2.836
Formix International (Excess)
Perfect Parts
Higher supply voltage allows for more efficient and powerful operation.
Wide body provides stability and durability to the sensor.
Hall effect sensors are known for their accuracy and reliability in measuring magnetic fields.
Low profile design allows for easy integration into various applications.
Rectangular shape provides versatility in mounting options.
Lower minimum supply voltage ensures compatibility with a wide range of systems.
High operating temperature range allows for use in harsh environments.
Wide output range provides flexibility in signal interpretation.
Digital output eliminates the need for analog signal conditioning, simplifying the design.
Low operating temperature range ensures reliable performance in cold conditions.
Tin finish provides corrosion resistance for longer-lasting performance.
Higher operating current allows for stronger output signals.
Plastic housing offers lightweight construction without compromising on durability.
Wide range of measurement allows for detection of weak magnetic fields.
High output current capability enables driving of external loads.
High magnetic field range makes the sensor suitable for a variety of applications.
Compact size enables easy integration into tight spaces.
Solder termination ensures secure and reliable electrical connections.
Surface mount capability simplifies installation and PCB layout.
Magnetic Field Sensors TLE4997A8XUMA1 attributes and parameters. Explore more Magnetic Field Sensors devices from Infineon Technologies
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Output Range:
Output Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
PCN Packaging - Mult Dev Cover Tape Chg 13/Jul/2022
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Bkc Semiconductors
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Meritek Electronics
SS495A1-T2
Honeywell Sensing And Control
SS495A1-T2 by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3mm body height, and 1.5% linearity. Ideal for applications requiring precise sensing of magnetic fields in the range of -67mT to 67mT. Features transistor output circuit type and operates b/w -40°C to 150°C temperature range.
A1389LLHLT-RP9-T
Allegro MicroSystems
MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
OHS3131U
Tt Electronics Plc
OHS3131U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 1mT. It features an output range of 25mA, suitable for applications requiring precise current output control in environments with temperatures ranging from -40 to 125°C. The sensor's rectangular plastic/epoxy package makes it ideal for through-hole mounting setups.
HAL504SF-A
Micronas Semiconductor Holding Ag
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;
TLE4961-1M
Infineon Technologies
TLE4961-1M by Infineon: 32V max supply, 4mT hysteresis, 0-25mA output range. Ideal for Hall effect magnetic field sensing in automotive and industrial applications.
AH49ENTR-G1
Diodes Incorporated
AH49ENTR-G1 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 3-6.5V, and sensitivity of 1.6mV/G. Ideal for applications requiring single-ended analog voltage output in temperature range -40 to 85°C, such as automotive and industrial systems.
DRV5011ADDBZR
Texas Instruments
DRV5011ADDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 4mT, suitable for applications requiring current output in the range of -5-20mA. With a compact rectangular package design and operating temperatures from -40°C to 135°C, it is ideal for surface mount installations in various industrial environments.
LAH25-NP
Lem International Sa
LAH25-NP by Lem International Sa is a magnetic field sensor with 9 terminals, current output, and resistance of 259 ohm. It operates b/w -25 to 85 °C and has a supply voltage range of 14.25-15.75 V. Ideal for applications requiring precise magnetic field detection in a compact rectangular package.
DRV5033FAEDBZRQ1
DRV5033FAEDBZRQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating voltage range from 2.7V to 38V, and AEC-Q100 screening level. It is ideal for automotive applications due to its omnidirectional input mode, digital output type, and wide magnetic field range of -0.5mT to 6mT.
DRV5053VAQDBZTQ1
DRV5053VAQDBZTQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers a current output ranging from 0-2.3mA, making it ideal for automotive applications requiring precise magnetic field detection in harsh environments compliant with AEC-Q100 standards.
A1106LLHLT-T
Allegro MicroSystems' A1106LLHLT-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and hysteresis of 10.5 mT. It operates b/w -40 to 150°C, suitable for automotive applications requiring precise magnetic field detection in the range of 16-43 mT.
55100-3M-03-A
Littelfuse
Littelfuse 55100-3M-03-A is a magnetic field sensor with 24V max supply voltage, 10A max output current, and -40 to 100°C operating temperature range. It is used for Hall effect sensing in applications requiring digital current output interface and flange mounting.
A1324LLHLX-T
Allegro MicroSystems' A1324LLHLX-T is a magnetic field sensor with 5.5V max supply voltage, 1.5% linearity, and 5000 mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperature ranges from -40 to 150°C.
APS12200LLHALX
APS12200LLHALX by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 4mT hysteresis, and -40 to 150°C operating temperature range. Ideal for current output applications, it features a 3-wire interface and surface mounting feature.
A1222LUA-T
Allegro MicroSystems' A1222LUA-T is a magnetic field sensor with 24V supply, 22mT hysteresis, and 30-60mA output range. Ideal for Hall effect applications, it operates b/w -40 to 150°C, offering single-ended analog current output in a rectangular package suitable for through-hole mounting.
A1308LLHLX-05-T
Allegro MicroSystems A1308LLHLX-05-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.5mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on Hall effect technology in a compact rectangular package.
TLE4945LXA
TLE4945LXA by Infineon Technologies is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 10mT. It features digital current output, operates at a max current of 8mA, and comes in a rectangular plastic housing. Ideal for applications requiring precise magnetic field sensing in various industries.
TLE4964-2M
TLE4964-2M by Infineon is a magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring current output sensing in a compact rectangular package, such as automotive systems or industrial automation.
SNDH-T4P-G02
Honeywell SNDH-T4P-G02 is a Hall effect magnetic field sensor with 4.5-18V supply, -40 to 150°C temp range, and 20A output current. It features a cylindrical design with flange mount for industrial applications requiring precise digital output sensing.
A1223LLHLX-T
Allegro MicroSystems' A1223LLHLX-T is a magnetic field sensor with 24V max supply voltage, 30mT hysteresis, and 1.91" body width. Ideal for applications requiring current output in the range of -18mT to 18mT, such as automotive systems and industrial automation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE49215UHALA1
TLE49215UHALA1 by Infineon is a magnetic field sensor with 24V max supply voltage, 1.5mT hysteresis, and -5mV/G sensitivity. It features a digital voltage output ranging from 0.25-0.60V and is ideal for applications requiring precise magnetic field detection in various industries such as automotive, industrial automation, and consumer electronics.
TLE4906LHALA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.6V; Maximum Operating Current: 6 mA;
TLE49642MXTMA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-25mA; Terminal Finish: TIN;
TLE49452LHALA1
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
TLE4906KHTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: -0.7-18V; Termination Type: SOLDER;
TLE4905LE6433HAXA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 150 Cel; Body Width: 1.52 inch;
TLE4905LHALA1
TLE4905LHALA1 by Infineon is a Hall effect magnetic field sensor with 24V max supply, 6mT hysteresis, and 8mA max operating current. Ideal for applications requiring digital current output in automotive systems, industrial automation, and consumer electronics due to its compact rectangular design and through-hole mounting feature.
TLE493DW2B6A0HTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Maximum Magnetic Field Range: 230 mT;
TLE49452LXA
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Housing: PLASTIC;
TLE49642MXTSA1/SAMPLE
TLE49642MXTSA1/SAMPLE by Infineon Technologies is a magnetic field sensor with a max supply voltage of 32V and hysteresis of 5.5mT. It has a current output range of 0-25mA and is commonly used in applications such as automotive systems, industrial automation, and robotics.
TLE493DW2B6A1HTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Height: 1.1 mm;
TLE49215UXA
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.25-0.60V; Maximum Operating Current: 8.8 mA;
TLE49643KXTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-25mA;
TLE4935LHALA1
TLE4935LHALA1 by Infineon is a magnetic field sensor with 24V max supply voltage, 40mT hysteresis, and -40 to 150°C operating temp. Ideal for applications requiring digital current output in a compact rectangular package.
TLE49662KHTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-10mA;
TLE4997E2XALA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Body Length/Diameter: 4.06 mm;
TLE4953CBAMA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: 500 mT; Terminal Finish: TIN;
TLE49421CBAMA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Terminal Finish: TIN; Minimum Supply Voltage: 4.5 V;
TLE49641MXTSA1
TLE49641MXTSA1 by Infineon is a magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring current output sensing in a compact rectangular plastic package.
TLE49663KHTSA1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved