Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTS3035EJXUMA1 by Infineon is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 3V to 5.5V and has a nominal output peak current limit of 5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
Median Price
$0.780
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.717
1k+ parts
$0.672
10k+ parts
-
Chip1Stop
$1.170
Mouser Electronics
$1.260
$0.733
$0.639
$0.607
Newark
$1.300
$0.754
$0.666
DigiKey
$1.480
$0.861
$0.748
Arrow
$0.626
Verical
$0.538
Rochester
$0.718
$0.596
$0.532
Farnell
$0.640
$0.529
Digiode
$0.594
Nova Conductors
$0.814
Chip Stock
VNN
Vyrian
IBS Electronics
$0.673
Ampacity Inc.
$0.463
Semicontronic
$0.451
$0.449
Corphita
$0.562
Advanced Electronics
Corohmni
$0.813
Modulus Dynamics
Continental Prestige Electronics
$0.798
Argo Parts USA
Microchip USA
$4.393
Aztec Data Supply Inc.
$4.880
Perfect Parts
GreenTree Electronics
Formix International (Excess)
Netroflash
$0.773
$0.757
The use of plastic/epoxy material ensures durability and resistance to external elements, making this product suitable for a variety of environments.
Being surface mountable makes this product easy to install on PCBs, saving space and simplifying the assembly process.
With a maximum supply voltage of 5.5 V, this product can handle a wide range of input voltages, providing flexibility in power supply options.
AEC-Q100 screening ensures high reliability and quality, making this product suitable for automotive applications where reliability is crucial.
The built-in protections ensure safe operation of the device and protect it from potentially damaging conditions, increasing overall reliability and longevity.
Having 8 terminals provides connectivity options for various connections, allowing for versatility in circuit design and implementation.
The minimum supply voltage of 3 V allows for operation in low-power scenarios, increasing efficiency and reducing power consumption.
The terminal finish of tin provides good solderability and reliability, ensuring secure connections and longevity of the device.
Dual terminal positions offer flexibility in board layout and connections, making it easier to integrate this product into various circuit designs.
The low maximum seated height allows for a compact design, making this product suitable for applications where space is limited.
The narrow width of 3.9 mm enables efficient use of board space, contributing to a more compact and streamlined overall system design.
The short length of 4.9 mm further contributes to a compact design, making this product suitable for applications with space constraints.
The gull wing terminal form provides mechanical stability and ease of soldering, ensuring secure connections and reliable operation.
With a nominal supply voltage of 5 V, this product is compatible with standard power sources, making it easy to integrate into a variety of systems.
The fast turn-on time of 115 us allows for quick response and activation, making this product suitable for time-sensitive applications.
The terminal pitch of 1.27 mm provides proper spacing for connections, ensuring reliability and ease of assembly.
With an MSL of 2A, this product is less susceptible to moisture damage, making it suitable for a wider range of environmental conditions.
The nominal output peak current limit of 5 A allows for handling higher loads when needed, providing flexibility and reliability in operation.
The interface IC type of buffer or inverter based peripheral driver ensures compatibility with various systems and applications, making this product versatile and easy to integrate.
The turn-off time of 210 us ensures quick deactivation, contributing to efficient operation and control of the device.
The sink output current flow direction is suitable for driving external loads, providing flexibility and compatibility with a wide range of components and systems.
Peripheral Drivers BTS3035EJXUMA1 attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
BTS3035EJXUMA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Dev Cover Tape Chg 13/Jul/2022
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Comset Semiconductors
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
American Power Devices
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
TPS27S100ARRKT
TPS27S100ARRKT by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C and supports a supply voltage range of 4-40V. This peripheral driver in chip carrier package is ideal for automotive applications requiring fast turn-on/off times.
AUIR3313STRL
AUIR3313STRL by Infineon Technologies is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It has a max output current of 23A and is suitable for applications requiring interface IC type buffer or inverter based peripheral drivers. The package style is small outline with heat sink/slug, making it ideal for compact designs.
VN820PT-E
STMicroelectronics
VN820PT-E by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package driver is ideal for applications requiring source flow direction in automotive and industrial settings.
FSFR2100XS
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Position: ZIG-ZAG; Package Body Material: PLASTIC/EPOXY;
DS2482S-800
Maxim Integrated
DS2482S-800 by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade. It is used as a buffer or inverter based peripheral driver in various applications requiring source current flow direction control.
MIC2544A-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSP452
BSP452 by Infineon is a MOS technology-based peripheral driver with 4 terminals and built-in protections for over/under voltage. It operates at supply voltages ranging from 5V to 34V, making it suitable for automotive applications requiring a nominal output peak current limit of 0.7A. The small outline package style with gull wing terminal form enables surface mount installation in compact spaces.
TPS27S100BPWPR
TPS27S100BPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It operates in automotive temperature grades from -40 to 125°C and has a nominal output peak current limit of 7A. Ideal for high side driver applications with sink output current flow direction.
TPS2H000BQPWPRQ1
TPS2H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
L298P
L298P by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at a supply voltage range of 4.5V to 46V. It features built-in protections for over current and thermal issues, making it suitable for various applications requiring source and sink output current flow direction. The package style is small outline with heat sink, ideal for space-constrained designs.
LMD18200T/LF14
LMD18200T/LF14 by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.
VN920DB5TR-E
STMicroelectronics' VN920DB5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. It is used for buffer or inverter-based applications requiring transient, over current, over voltage, thermal, under voltage protection. The small outline package style makes it suitable for compact designs with limited space constraints.
ULN2003D
Philips Semiconductors
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
VN7140ASTR-E
STMicroelectronics' VN7140ASTR-E is a peripheral driver with 8 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring sink output current flow direction and buffer or inverter based interface IC type.
L9958SB
L9958SB by STMicroelectronics is a FB-based peripheral driver with PWM, offering source and sink output current flow direction. With 16 terminals in a small outline package, it features matte tin terminal finish and gull wing form. Ideal for applications requiring precise motor control in automotive systems.
ULN2003A
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
ULN2003ANE3
ULN2003ANE3 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with open-collector output polarity. It operates b/w -20°C to 70°C, supports a nominal voltage of 50V, and has built-in transient protections. Ideal for applications requiring sink current flow direction in an in-line package style.
VNQ5160KTR-E
STMicroelectronics' VNQ5160KTR-E is a peripheral driver with 4 functions, operating at 8-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a compact design and fast turn-on/off times like automotive systems.
MDC3105LT1G
MDC3105LT1G by Onsemi is a Peripheral Driver with 3 terminals, operating voltage range of 3-6V, and max output current of 0.25A. It is a small outline IC suitable for industrial applications requiring transient protection and sink output current flow. The package style is thin profile with matte tin finish, making it ideal for surface mount designs in various electronic systems.
ITS428L2XT
ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTS3134NHUMA1
BTS3134NHUMA1 by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 4 terminals in a small outline package style, with a nominal voltage of 12V and output peak current limit of 24A. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 100 us.
BTS3408GXUMA2
BTS3408GXUMA2 by Infineon is a peripheral driver with 60V max supply voltage, AEC-Q100 screening, and built-in protections for transient, over current, over voltage & thermal. It's used in automotive applications due to its BCD technology, Schmitt trigger input characteristics & sink output current flow direction.
BTS3408GXUMA2/SN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
BTS3800SLHTSA1
BTS3800SLHTSA1 by Infineon Technologies is a peripheral driver with 5 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 5us. This small outline device is ideal for applications requiring source/sink output current flow control.
BTS3405GXUMA1
BTS3405GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal conditions. It has 8 terminals in a small outline package style, with a nominal voltage of 12V and a max seated height of 1.75mm. This interface IC type is suitable for buffer or inverter based applications requiring a turn-on time of 38us and turn-off time of 45us.
BTS3410GXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BTS3028SDLATMA1
BTS3028SDLATMA1 by Infineon is a peripheral driver with 36V max supply voltage, built-in protections, and 5.8A nominal output peak current limit. Ideal for industrial applications requiring sink output current flow direction and fast turn-on/off times of 120us/200us. Package style is small outline with gull wing terminals for surface mount assembly.
BTS3408GXUMA1
BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.
BTS3408G
BTS3408G by Infineon is a MOS technology peripheral driver with 60V max supply voltage, built-in protections for transient, over current, and over voltage. It has 8 terminals in small outline package style suitable for automotive applications meeting AEC-Q100 standards.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
BTS3205NHUSA1
BTS3205NHUSA1 by Infineon Technologies is a peripheral driver with a nominal output peak current limit of 0.55A and Gull Wing terminal form. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction, such as automotive electronics.
BTS3046SDLATMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR;
BTS3028SDRATMA1
BTS3028SDRATMA1 by Infineon is a peripheral driver with max supply voltage of 36V, built-in protections for transient, over current & over voltage. It has turn-on time of 120us and nominal output peak current limit of 5.8A. Ideal for industrial applications requiring sink output current flow direction.
BTS3205GXUMA1
BTS3205GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal issues. It operates at a nominal voltage of 12V with a turn-on time of 38µs and turn-off time of 45µs. This small outline package is ideal for applications requiring sink output current flow direction.
BTS3134N
BTS3134N by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It operates at a nominal voltage of 12V and has a max output peak current limit of 24A. This driver is commonly used as a buffer or inverter based peripheral driver in various applications.
BTS3205NHUSA1/SAMPLE
BTS3256DAUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; Moisture Sensitivity Level (MSL): 3;
BTS3110NHUMA1
BTS3110NHUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features a small outline, low profile package style with 4 terminals in a gull wing form. This interface IC type has a nominal output peak current limit of 7.5A and is suitable for applications requiring sink output current flow direction.
BTS3118NHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved