Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTS3028SDRATMA1 by Infineon is a peripheral driver with max supply voltage of 36V, built-in protections for transient, over current & over voltage. It has turn-on time of 120us and nominal output peak current limit of 5.8A. Ideal for industrial applications requiring sink output current flow direction.
Median Price
$2.100
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.520
100+ parts
$1.680
1k+ parts
-
10k+ parts
Newark
$2.820
$1.720
$1.600
DigiKey
$3.220
$1.968
$1.742
Arrow
$1.454
Verical
$1.210
Element14
$2.030
$1.950
RS (Exports)
$2.170
$1.615
Farnell
$1.240
$1.080
Nova Conductors
$1.845
Digiode
$1.966
Vyrian
Rutronik
$1.580
VNN
Ampacity Inc.
$1.050
Semicontronic
$1.024
$1.018
Argo Parts USA
$1.807
Aranea Global
$1.808
$1.736
Corphita
$1.863
Modulus Dynamics
$7.446
$7.148
$6.850
Microchip USA
$8.710
Aztec Data Supply Inc.
$8.800
Advanced Electronics
$10.689
$10.155
Corohmni
$14.566
Continental Prestige Electronics
$1.630
$1.180
Lixinc
Perfect Parts
GreenTree Electronics
Futuretech Components
Robosynatics
$6.658
$6.522
Lucentia Tech
The plastic/epoxy material used in the package body makes the peripheral driver lightweight and durable.
The surface mount feature allows for easy and secure installation on a circuit board.
With a maximum supply voltage of 36V, this peripheral driver can handle a wide range of input voltages, making it versatile for different applications.
The built-in protections ensure the peripheral driver and the connected devices are safeguarded against transient voltage spikes, overcurrent situations, overvoltage conditions, and thermal issues, enhancing the reliability and longevity of the product.
The high maximum operating temperature of 85°C ensures that this peripheral driver can perform effectively in harsh industrial environments.
The high nominal output peak current limit of 5.8A allows the peripheral driver to deliver sufficient current to drive connected peripherals and devices effectively.
Peripheral Drivers BTS3028SDRATMA1 attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
BTS3028SDRATMA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Cover Tape Width Update 17/Jun/2015
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Socay Electronics
Semiconductor Technology
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Semitronics
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
VNI4140K
VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.
ISO1H812GXT
Infineon Technologies
Infineon's ISO1H812GXT is a 36-terminal peripheral driver with a 2.2A output peak current limit in a small outline package. It features a half-bridge interface IC and sink output current flow direction, making it ideal for various applications requiring precise control of peripherals.
ISP452HUMA1
ISP452HUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, operating voltage range of 5-34V. It offers transient protection, sink output current flow direction, and turn-on/off times of 100/150 us. Ideal for buffer or inverter-based applications in commercial extended temperature environments.
VNQ500PEPTR-E
STMicroelectronics' VNQ500PEPTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 5.5V to 36V and has a compact package style suitable for various applications requiring source output current flow direction.
BSP78
BSP78 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a peak output current limit of 24A. This rectangular package style IC is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.
L6201PSTR
L6201PSTR by STMicroelectronics is a full bridge peripheral driver with 1A output current, 48V max supply voltage, and built-in transient protection. It is ideal for applications requiring source and sink output current flow direction in a compact small outline package.
FAN7390MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DRV103H/2K5
Texas Instruments
DRV103H/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections against transient, over current, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
BTN8962TA
BTN8962TA by Infineon Technologies is a 7-terminal MOS peripheral driver with built-in protections for transient, over/under voltage & current. It operates at 8-18V, AEC-Q100 screened, ideal for automotive applications requiring true output polarity and Schmitt trigger input characteristics.
TPS22810TDBVRQ1
TPS22810TDBVRQ1 by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates b/w -40 to 105 °C and supports a supply voltage range of 2.7V to 18V. Built-in protections include thermal and under voltage, making it ideal for industrial applications requiring sink output current flow direction.
FSFR2100XSL
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; No. of Functions: 1; Terminal Finish: MATTE TIN;
ULN2003V12T16-13
Diodes Incorporated
ULN2003V12T16-13 by Diodes Inc. is a peripheral driver with 1 function, operating temperature range of -40 to 125°C, and a small outline package. It is commonly used in automotive applications for buffer or inverter based interface ICs requiring inverted output polarity and sink current flow direction.
TPS22965NQWDSGRQ1
TPS22965NQWDSGRQ1 by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.5V to 5.5V, and automotive temperature grade up to 125°C. It features built-in transient protection and sink output current flow direction, making it ideal for automotive applications requiring reliable performance in harsh environments.
TBD62783AFNG,EL
Toshiba
Toshiba's TBD62783AFNG,EL is a peripheral driver with 8 functions and a max supply voltage of 50V. It has a small outline package style and is suitable for industrial applications.
ISP742RIFUMA1
ISP742RIFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating at -30 to 85 °C. It offers built-in protections for over current, over voltage, and thermal issues. This small outline package has a max supply voltage of 34 V and sink output current flow direction, suitable for buffer or inverter-based interface IC applications.
AUIPS7111STRL
AUIPS7111STRL by Infineon is a peripheral driver with 10A max output current, 50V max supply voltage, and -40 to 125°C operating temperature range. Ideal for automotive applications, it offers built-in protections against transient events, overcurrent, and thermal issues. With a small outline package style and sink output current flow direction, it's designed for high-performance automotive systems.
TPS22919DCKT
TPS22919DCKT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 1.6V to 5.5V, and output current limit of 3A. It offers built-in protections against transient events, overcurrent, and thermal issues. Ideal for industrial applications requiring a compact thin profile package with sink flow direction.
BTS442E2E3062A
BTS442E2E3062A by Infineon is a MOS technology peripheral driver with 4.5-42V supply, 70A output current limit, and built-in protections. It has a small outline package style for surface mount applications. Ideal for controlling high-power loads in automotive and industrial systems.
TPS1H200AQDGNRQ1
TPS1H200AQDGNRQ1 by Texas Instruments is a high side driver with 40V max supply voltage, 4V min supply voltage, and 125°C max operating temp. Ideal for automotive applications due to AEC-Q100 screening level and built-in protections against transient, over current, and thermal issues.
ULN2003AS16-13
ULN2003AS16-13 by Diodes Inc. is a peripheral driver with 1 function and 16 terminals. It has a max supply voltage of 13V and can operate at temperatures ranging from -40 to 105°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTS3134NHUMA1
BTS3134NHUMA1 by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 4 terminals in a small outline package style, with a nominal voltage of 12V and output peak current limit of 24A. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 100 us.
BTS3408GXUMA2
BTS3408GXUMA2 by Infineon is a peripheral driver with 60V max supply voltage, AEC-Q100 screening, and built-in protections for transient, over current, over voltage & thermal. It's used in automotive applications due to its BCD technology, Schmitt trigger input characteristics & sink output current flow direction.
BTS3408GXUMA2/SN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
BTS3800SLHTSA1
BTS3800SLHTSA1 by Infineon Technologies is a peripheral driver with 5 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 5us. This small outline device is ideal for applications requiring source/sink output current flow control.
BTS3405GXUMA1
BTS3405GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal conditions. It has 8 terminals in a small outline package style, with a nominal voltage of 12V and a max seated height of 1.75mm. This interface IC type is suitable for buffer or inverter based applications requiring a turn-on time of 38us and turn-off time of 45us.
BTS3410GXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BTS3028SDLATMA1
BTS3028SDLATMA1 by Infineon is a peripheral driver with 36V max supply voltage, built-in protections, and 5.8A nominal output peak current limit. Ideal for industrial applications requiring sink output current flow direction and fast turn-on/off times of 120us/200us. Package style is small outline with gull wing terminals for surface mount assembly.
BTS3408GXUMA1
BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.
BTS3408G
BTS3408G by Infineon is a MOS technology peripheral driver with 60V max supply voltage, built-in protections for transient, over current, and over voltage. It has 8 terminals in small outline package style suitable for automotive applications meeting AEC-Q100 standards.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
BTS3205NHUSA1
BTS3205NHUSA1 by Infineon Technologies is a peripheral driver with a nominal output peak current limit of 0.55A and Gull Wing terminal form. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction, such as automotive electronics.
BTS3046SDLATMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR;
BTS3205GXUMA1
BTS3205GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal issues. It operates at a nominal voltage of 12V with a turn-on time of 38µs and turn-off time of 45µs. This small outline package is ideal for applications requiring sink output current flow direction.
BTS3134N
BTS3134N by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It operates at a nominal voltage of 12V and has a max output peak current limit of 24A. This driver is commonly used as a buffer or inverter based peripheral driver in various applications.
BTS3035EJXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
BTS3205NHUSA1/SAMPLE
BTS3256DAUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; Moisture Sensitivity Level (MSL): 3;
BTS3110NHUMA1
BTS3110NHUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features a small outline, low profile package style with 4 terminals in a gull wing form. This interface IC type has a nominal output peak current limit of 7.5A and is suitable for applications requiring sink output current flow direction.
BTS3118NHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved