Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Infineon BSP318SL6327 is a N-CHANNEL FET with 60V DS breakdown voltage, 10.4A pulsed drain current, and 0.15 ohm max on-resistance. Ideal for power applications, it operates in enhancement mode with a max power dissipation of 1.8W at 150°C, featuring a built-in diode and avalanche energy rating of 60mJ.
Median Price
$0.580
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$0.551
Nova Conductors
$235.381
Chip Stock
Pegasus Components GmbH
ComSIT Distribution GmbH
ComSIT USA
VNN
Q Components
Vyrian
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
J2 Sourcing AB
Corphita
$0.522
Aztec Data Supply Inc.
$1.020
Ampacity Inc.
$1.070
Semicontronic
$1.043
$1.038
Advanced Electronics
$1.314
$1.249
Modulus Dynamics
$1.393
$1.337
$1.282
Corohmni
$1.803
AZTECH Wire
$8.200
$7.880
$7.720
$7.560
Andel Nordic
$39.040
$27.327
Continental Prestige Electronics
$230.673
Netroflash
$223.612
$218.904
Authorized Procurement Solutions
Lixinc
RC Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
GreenTree Electronics
Assy Fe
Robosynatics
Lucentia Tech
$25.544
Argo Parts USA
Futuretech Components
Kepictronics
Computer Components Inc. - USA
Provides durability and protection for the internal components, making the product long-lasting.
N-channel FETs typically offer better performance and efficiency compared to P-channel FETs, making this product a good choice for power applications.
Built-in diode allows for easier circuit design and protection against reverse voltage.
Allows for easy and efficient implementation on PCBs, saving space and simplifying the assembly process.
With a high breakdown voltage, this FET can handle high voltage applications reliably.
Capable of handling high current loads, making it suitable for various power applications.
Efficient power dissipation ensures the FET can operate at optimal levels without overheating.
Can operate in high-temperature environments without compromising performance, suitable for industrial applications.
Power Field Effect Transistors (FET) BSP318SL6327 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
BSP318SL6327 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Rochester Electronics
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Silicon Standard
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
STD30NF06LT4
STD30NF06LT4 by STMicroelectronics is an N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 140A and 0.03 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. This power transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount assembly.
FDS8984
Onsemi
FDS8984 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 32mJ Avalanche Energy Rating. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS and BUILT-IN DIODE. This small outline transistor has a max operating temperature of 150°C and can handle up to 30A pulsed drain current.
SPW20N60C3FKSA1
Infineon Technologies
SPW20N60C3FKSA1 by Infineon is a N-CHANNEL FET with 600V DS Breakdown Voltage, 62.1A IDM, and 0.19 ohm RDS(on). It is used in power applications due to its 690mJ EAS rating, operating at up to 150°C.
PSMN040-100MSEX
PSMN040-100MSEX by NXP Semiconductors is a single-channel N-CHANNEL power FET with a max drain current of 30A and max power dissipation of 91W. It operates in enhancement mode and is suitable for applications requiring high power and temperature resistance.
IRF3710STRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-30 Code: R-PSSO-G2;
NCV8406ASTT3G
NCV8406ASTT3G by Onsemi is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 0.24 ohm Drain-Source On Resistance, and 1.81W Power Dissipation. Ideal for use in automotive electronics due to AEC-Q101 standard compliance.
BSP295H6327XTSA1
BSP295H6327XTSA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 7.2A max pulsed drain current. It is used in enhancement mode applications, featuring a built-in diode, 0.5 ohm max RDS(on), and AEC-Q101 standard compliance for automotive electronics.
IRF640STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; No. of Terminals: 2; Case Connection: DRAIN;
BSC016N06NSATMA1
Infineon's BSC016N06NSATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a max IDM of 400A and EAS of 380mJ, ensuring efficient operation. With a drain-source on resistance of 0.0016 ohm and operating temperature up to 150°C, it offers high performance in a small outline package.
ZVN2110GTA
Diodes Incorporated
ZVN2110GTA by Diodes Inc. is a N-CHANNEL power FET with 100V DS breakdown voltage, 6A IDM, and 4 ohm RDS(on). It is used for switching applications in small outline packages.
FDN5618P_NL
Fairchild Semiconductor
Fairchild Semiconductor's FDN5618P_NL is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a Max Drain Current of 1.25A and 0.17 ohm On Resistance. The transistor operates in ENHANCEMENT MODE, has a Max Power Dissipation of 0.5W, and can handle up to 10A Pulsed Drain Current.
IXTK3N250L
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Maximum Pulsed Drain Current (IDM): 8 A; JEDEC-95 Code: TO-264AA;
NX3008NBK,215
NX3008NBK,215 by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 0.4A and power dissipation of 0.42W. Ideal for applications requiring high efficiency in power management systems due to its single configuration and enhancement mode operation at up to 150°C operating temperature.
BSC067N06LS3GATMA1
BSC067N06LS3GATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 200A IDM, 47mJ EAS, and 0.0067 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and SILICON element material.
IRFH5004TRPBF
The Infineon Technologies IRFH5004TRPBF is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A ID. Ideal for SWITCHING applications, it features a built-in diode, 400A IDM, and 0.0026 ohm RDS(on). Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 250W and can withstand temperatures up to 150°C.
IRLR2908TRPBF
Infineon's IRLR2908TRPBF is a N-CHANNEL FET with 80V DS Breakdown Voltage and 150A IDM. Ideal for SWITCHING applications, it features 0.028 ohm RDS(ON) and 120W Pdiss. With ENHANCEMENT MODE operation and METAL-OXIDE SEMICONDUCTOR tech, it operates up to 175°C making it suitable for high-power electronics.
FDMC5614P
FDMC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 23A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a SQUARE PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 6W at 150°C.
FDD7N25LZTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 56 W; Package Body Material: PLASTIC/EPOXY; Transistor Element Material: SILICON;
IRLML6401PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Feedback Capacitance (Crss): 125 pF; Peak Reflow Temperature (C): 260;
ZXMP6A17E6TA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: Matte Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BSP317PH6327XTSA1
BSP317PH6327XTSA1 by Infineon is a P-CHANNEL FET with 250V DS breakdown voltage. It features a single configuration with built-in diode, suitable for enhancement mode operation. This MOSFET has 1.72A max pulsed drain current and is ideal for automotive applications meeting AEC-Q101 standards.
BSP318SH6327XTSA1
Infineon's BSP318SH6327XTSA1 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 10.4A Pulsed Drain Current. Ideal for automotive applications, it features a built-in diode, 0.15 ohm On Resistance, and 260°C Peak Reflow Temperature.
BSP320SH6327XTSA1
Infineon's BSP320SH6327XTSA1 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage. It features 11.6A IDM, 0.12 ohm RDS(on), and 150°C Max Operating Temp. Ideal for automotive applications due to AEC-Q101 compliance, it offers high efficiency in compact designs with its small outline package and built-in diode configuration.
BSP315PH6327XTSA1
Infineon's BSP315PH6327XTSA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for power applications. Features include 4.68A IDM, 24mJ EAS, and 0.8 ohm RDS(ON). Suitable for automotive electronics due to AEC-Q101 compliance and high temp rating of 150°C.
BSP316PH6327XTSA1
BSP316PH6327XTSA1 by Infineon is a P-CHANNEL FET with 100V DS breakdown voltage, ideal for power applications. It features single configuration with built-in diode, 2.72A max pulsed drain current, and 1.8ohm max drain-source resistance. Suitable for enhancement mode operation in automotive electronics due to AEC-Q101 compliance.
BSP315PH6327
Infineon's BSP315PH6327 is a P-CHANNEL FET with 60V DS Breakdown Voltage and 4.68A IDM. Ideal for automotive applications, it features a built-in diode, 0.8 ohm RDS(on), and 24mJ EAS rating. AEC-Q101 compliant, this MOSFET has a small outline package and matte tin finish for enhanced performance in harsh environments.
BSP315P
BSP315P by Infineon Technologies is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 4.68A and EAS of 24mJ, operating in ENHANCEMENT MODE at up to 150°C. This SMALL OUTLINE transistor has 0.8 ohm RDS(on) and DUAL terminal position for efficient power dissipation.
BSP318SH6327
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Maximum Drain Current (ID): 2.6 A; Transistor Element Material: SILICON;
BSP315PL6327
Infineon BSP315PL6327 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 4.68A IDM, and 0.8 ohm RDS(on). Ideal for power management applications in automotive industry due to AEC-Q101 standard compliance and 150°C operating temperature.
BSP315PL6327HTSA1
Infineon's BSP315PL6327HTSA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 4.68A IDM, and 0.8 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and built-in diode for efficient power management in compact spaces.
BSP322PH6327XTSA1
BSP322PH6327XTSA1 by Infineon is a P-CHANNEL FET with 100V DS Breakdown Voltage, suitable for power applications. It features a max IDM of 4A and EAS of 57mJ, ideal for high-power circuits. With an operating temperature up to 150°C, it offers reliable performance in harsh environments.
BSP318SL6327HTSA1
Infineon's BSP318SL6327HTSA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage and 10.4A IDM. Ideal for power applications, it features a built-in diode, 0.15 ohm RDS(on), and operates in enhancement mode up to 150°C.
BSP318SE6327
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): 2.6 A; Maximum Drain-Source On Resistance: .15 ohm;
Infineon's BSP318SE6327 is a N-CHANNEL FET with 60V DS breakdown voltage, 2.6A ID, and 0.15 ohm RDS(on). Ideal for power applications, it operates in enhancement mode with GULL WING terminals and small outline package style.
BSP372NH6327XTSA1
Infineon's BSP372NH6327XTSA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 7.2A IDM, and 0.23 ohm RDS(on). Ideal for power management applications in automotive industry due to AEC-Q101 standard compliance and 33mJ EAS rating.
BSP316PH6327
Infineon's BSP316PH6327 is a P-CHANNEL FET with 100V DS breakdown voltage, ideal for automotive applications. Featuring single configuration with built-in diode, it offers 2.72A max pulsed drain current and 1.8 ohm max RDS(on). AEC-Q101 compliant, this MOSFET in small outline package suits power management needs.
BSP318S
BSP318S by Infineon Technologies is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 10.4A and EAS of 60mJ, operating in ENHANCEMENT MODE. With a 0.15 ohm Drain-Source On Resistance, it offers high performance in a SMALL OUTLINE package for efficient power dissipation up to 1.8W at temperatures ranging from -55 to 150°C.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Transistor Element Material: SILICON; Terminal Position: DUAL; JESD-30 Code: R-PDSO-G4;
BSP324H6327XTSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.8 W; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 150 Cel;
BSP318E6327
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Avalanche Energy Rating (EAS): 8 mJ; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 10.4 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved