Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Surface Mount: NO; Maximum Holding Current: 75 mA; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -40 Cel; Repetitive Peak Off-state Voltage: 200 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Resion
1+ parts
100+ parts
1k+ parts
10k+ parts
Triode For Alternating Current (TRIAC) SC265B attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Harris Semiconductor
Minimum Critical Rate of Rise of Commutation Voltage:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
SC265B Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-066-2041, 5961010662041, 5961-01-176-3247, 5961011763247
NIIN
010662041, 011763247
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Solid State Devices
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Comchip Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
TIC263E
Texas Instruments
TIC263E by Texas Instruments is a TRIAC with 25A RMS on-state current, 50mA max DC gate trigger current, and 500V repetitive peak off-state voltage. It is used in applications requiring precise AC power control such as dimmer switches, motor speed controls, and heating regulation.
BTB12-600TW3G
BTB12-600TW3G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 5mA DC gate trigger current. It is ideal for applications requiring precise AC power control in various electronic devices.
5961-01-333-2236
5961-01-333-2236 by Texas Instruments is a TRIAC with max. DC gate trigger current of 50mA, max. leakage current of 2mA, and max. operating temp of 110°C. It is used as a trigger device in applications requiring a max RMS on-state current of 16A and repetitive peak off-state voltage of 600V.
MAC12SN
MAC12SN by Onsemi is a TRIAC with 12A RMS current, 800V repetitive peak off-state voltage, and 5mA DC gate trigger current. It is ideal for applications requiring precise AC power control in various electronic devices due to its 4-quadrant logic level TRIAC configuration.
ACS102-6T1-TR
STMicroelectronics
ACS102-6T1-TR by STMicroelectronics is a TRIAC with 5mA DC Gate Trigger Current, 7.6A Non Repetitive Peak On-state Current, and 600V Repetitive Peak Off-state Voltage. It is used in applications requiring AC switching such as lighting controls and motor speed control due to its small outline package and surface mount capability.
BT139-600E,127
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC225M
TIC225M by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 2mA Leakage Current, and 110°C Operating Temperature. Ideal for AC power control applications due to its 8A RMS On-state Current, 600V Repetitive Peak Off-state Voltage, and fast commutation voltage rise rate of 5V/μs.
MAC97A6G
MAC97A6G by Onsemi is a TRIAC with max DC gate trigger current of 5mA and max RMS on-state current of 0.6A. It operates b/w -40 to 110°C, suitable for applications requiring precise AC power control like dimmers and motor speed controllers. The device has a repetitive peak off-state voltage of 400V, making it ideal for various switching tasks.
Q6025K6TP
Littelfuse
Q6025K6TP by Littelfuse is a TRIAC with 25A RMS on-state current, 600V repetitive peak off-state voltage, and 80mA max DC gate trigger current. Ideal for applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
BTB08-600BRG
STMicroelectronics' BTB08-600BRG is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage. It has a max RMS on-state current of 8A and can handle up to 50mA DC gate trigger current. Ideal for applications requiring precise AC power control in industrial settings.
TIC236B
TIC236B by Texas Instruments is a TRIAC with 12A RMS current, 200V repetitive peak off-state voltage, and 50mA DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC switching tasks. Operating temperature ranges from -40 to 110°C, making it suitable for various industrial and consumer electronics.
2N6071
Semitronics
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 2.5 V;
MAC997B6RL1
MAC997B6RL1 by Onsemi is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.8A. Ideal for applications requiring a 4 quadrant logic level TRIAC, it operates b/w -40 °C to 110°C and has a repetitive peak off-state voltage of 400V.
TIC236E
TIC236E by Texas Instruments is a TRIAC with 12A RMS current, 500V repetitive peak off-state voltage, and 110°C max operating temp. Ideal for AC power control applications due to its 50mA gate trigger current, -40°C min operating temp, and 2mA leakage current.
BTA25-800CW3G
BTA25-800CW3G by Onsemi is a single TRIAC with 25A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. Ideal for AC power control applications in various industries due to its snubberless design and wide operating temperature range from -40°C to 125°C.
MAC12HCM
MAC12HCM by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC4DSN-1
MAC4DSN-1 by Onsemi is a TRIAC with 3 terminals and a max RMS on-state current of 4A. It has a repetitive peak off-state voltage of 800V and can operate in temperatures ranging from -40 to 125 °C. Ideal for AC power control applications due to its high performance and reliability.
DTA6E
DTA6E by Onsemi is a TRIAC with max on-state voltage of 1.5V, DC gate trigger current of 50mA, and leakage current of 2mA. It operates b/w -45 to 125 °C and has a max RMS on-state current of 6A. Ideal for AC applications requiring precise switching control.
BT139B-600,118
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC216M
TIC216M by Texas Instruments is a TRIAC with 600V repetitive peak off-state voltage, 6A max RMS on-state current, and 5mA max DC gate trigger current. It operates b/w -40°C to 110°C, making it suitable for AC power control applications like dimmers and motor speed controllers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved