Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 300 V; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: 5 mA;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
QUARKTWIN TECHNOLOGY LTD
1+ parts
100+ parts
1k+ parts
10k+ parts
CPlus Electronics
Silicon Controlled Rectifiers (SCR) 2N1915 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Harris Semiconductor
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
2N1915 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-00-813-9038, 5961008139038
NIIN
008139038
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ERJU06F10R0V
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
General Transistor
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
JANTX2N2323A
Aeroflex/metelics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Repetitive Peak Off-state Voltage: 50 V;
2N683
2N683 by Texas Instruments is a Silicon Controlled Rectifier with 30mA DC Gate Trigger Current, 150A Non Repetitive Peak On-state Current, and 25A Max On-state Current. It operates b/w -60°C to 125°C and has a max DC Gate Trigger Voltage of 3V. Ideal for applications requiring high current handling capabilities in various temperature conditions.
MCR100-8
Taiwan Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
C159PB
National Electronics
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 1600 A; Minimum Critical Rate of Rise of Off-state Voltage: 200 V/us; Maximum DC Gate Trigger Current: 150 mA; Maximum Leakage Current: 15 mA;
C50N
Powerex
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Additional Features: TO-83 FLAGED LEAD ALSO AVAILABLE;
2N3004
2N3004 by Texas Instruments is a SCR with max. DC Gate Trigger Current of 0.02 mA, Non Repetitive Peak On-state Current of 6 A, and Max. RMS On-state Current of 0.35 A. It is used in applications requiring high current switching capabilities such as power control circuits.
TYN640RG
TYN640RG by STMicroelectronics is a single SCR with max on-state current of 40A and non-repetitive peak on-state current of 480A. It operates in temperatures from -40 to 125°C, ideal for applications requiring high power control such as industrial motor drives and heating systems.
GA101
Microsemi
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
BT151S-800R,118
Ween Semiconductors
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
2N6336
2N6336 by Texas Instruments is a single SCR with max on-state current of 2A and non-repetitive peak current of 20A. It has a trigger voltage of 0.8V and is ideal for applications requiring high power control such as motor drives and lighting systems.
2N4441
Space Power Electronics
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us; JESD-609 Code: e0;
MCD162-14IO1
Littelfuse
The Littelfuse MCD162-14IO1 SCR has a max DC gate trigger current of 150mA, non-repetitive peak on-state current of 6000A, and max repetitive peak reverse voltage of 1400V. Ideal for applications requiring high power control in industrial settings.
VS-2N690
VS-2N690 by Vishay Intertechnology is a single SCR with 600V repetitive peak reverse voltage and 25A max RMS on-state current. Ideal for applications requiring high power control, such as industrial motor drives or power supplies. Operating temperature ranges from -65°C to 125°C, making it suitable for various environments.
TYN1012TRG
TYN1012TRG by STMicroelectronics is a single SCR with max on-state current of 8A and non-repetitive peak current of 146A. It operates in temperatures from -40 to 125°C, ideal for applications requiring high voltage switching such as motor control and lighting systems.
VS-ST1000C16K1
SCR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
X0202MN5BA4
X0202MN5BA4 by STMicroelectronics is a single SCR with a max on-state current of 0.8A and repetitive peak reverse voltage of 600V. It is used in applications requiring high surge current handling capabilities, such as power supplies and motor control systems.
M50-100-1-2-F-V
Sensata Technologies
The Sensata Technologies M50-100-1-2-F-V is a Silicon Controlled Rectifier with 150 mA DC Gate Trigger Current and 1500 A Non Repetitive Peak On-state Current. It features a common cathode configuration, suitable for applications requiring up to 100 A Max On-state Current. The device operates in temperatures ranging from -40°C to 125°C, making it ideal for various industrial and power control systems.
P0102DN5AA4
P0102DN5AA4 by STMicroelectronics is a SCR with 0.2mA DC Gate Trigger Current, 8A Non Repetitive Peak On-state Current, and 400V Repetitive Peak Reverse Voltage. It is used in applications requiring high current switching such as power supplies and motor control due to its small outline package and ANODE case connection.
L522F
Cynergy3 Components
SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: BRIDGE, HALF-CONTROLLED, COMMON ANODE WITH BUILT-IN DIODE; Case Connection: ISOLATED;
2N3939
2N3939 by Texas Instruments is a Silicon Controlled Rectifier with 60mA DC Gate Trigger Current, 100A Non Repetitive Peak On-state Current, and 7A Max On-state Current. It operates b/w -65°C to 125°C and has a max DC Gate Trigger Voltage of 3.2V. Ideal for applications requiring precise current control in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved