Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.317
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.314
100+ parts
$0.298
1k+ parts
10k+ parts
-
Newark
$0.608
$0.333
$0.284
$0.273
Mouser Electronics
$0.610
$0.340
$0.292
$0.277
DigiKey
$0.620
$0.290
Flip Electronics (Authorized)
Arrow
$0.237
Verical
$0.238
Avnet
Master Electronics
$0.272
$0.253
Rochester
$0.318
$0.264
$0.235
Chip1Stop
$0.251
$0.216
Digiode
Nova Conductors
$0.305
Maritex
$2.242
$0.597
$0.387
$0.331
Flip Electronics
Chip Stock
Vyrian
Sensible Micro Corp
IBS Electronics
$0.389
$0.278
$0.271
South Electronics
NAC Semi
$0.427
Prism Electronics
Elcom Components
QIE Inc.
Semtec, LLC
Semi Source
Ampacity Inc.
$0.160
Semicontronic
$0.185
$0.180
$0.179
Corohmni
$0.213
Corphita
$0.283
Argo Parts USA
$0.304
$0.295
Continental Prestige Electronics
Netroflash
Advanced Electronics
Microchip USA
$1.780
Aztec Data Supply Inc.
$3.841
Metaverse IC Inc.
RC Electronics
$0.310
$0.280
Perfect Parts
GreenTree Electronics
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Epart123
$6.700
Lixinc
TANS Electronics
Kulean Microsystems
Problanco Electronics
iodParts Technologies Inc.
$0.531
Robosynatics
$0.299
$0.293
Lucentia Tech
Supply Digital
SupplyDigital Components
Futuretech Components
Authorized Procurement Solutions
Speed Components Ltd (Excess)
UHIMA Technologies
Multiplexers & Switches FSA4157P6X attributes and parameters. Explore more Multiplexers & Switches devices from Fairchild Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA4157P6X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diodes Incorporated
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
74LVC1G3157GW
NXP Semiconductors
74LVC1G3157GW by NXP Semiconductors is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and has a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and high off-state isolation levels.
HEF4051BT,652
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AD8170ARZ
Analog Devices
AD8170ARZ by Analog Devices is a video multiplexer with 2 channels, operating at ±5V supplies. It features a small outline package, dual terminal position, and 17ns switch-on time. Ideal for industrial applications requiring fast signal switching in a compact form factor.
TS5A3166DCKRG4
TS5A3166DCKRG4 by Texas Instruments is a SPST switch with 3.9 ohm Ron, 18 ns switch-on time, and 62 dB isolation. Ideal for industrial applications requiring a small outline package with separate output and make-before-break switching capability at temperatures ranging from -40 to 85 °C.
MAX4709ESE
Maxim Integrated
MAX4709ESE by Maxim Integrated is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of ±15V and offers a max on-state resistance of 400 ohm. With a compact small outline package, it is ideal for industrial applications requiring precise signal switching within the temperature range of -40 to 85°C.
CD4066BMT
CD4066BMT by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm max on-state resistance, and 40 kHz nominal bandwidth. It operates at -55 to 125 °C, has a peak reflow temp of 260 C, and is suitable for military-grade applications requiring low power consumption and fast switching speeds.
ADG1208YRUZ
ADG1208YRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of +/-16.5V and has a max on-state resistance of 200 ohm. With automotive temperature grade, it is ideal for applications requiring high-speed switching and low power consumption.
DG508ACJ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
MPC506AU/1K
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG5436BRUZ-REEL7
ADG5436BRUZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 16 terminals, and 11 ohm on-state resistance. It operates at -40 to 125 °C and supports supply voltages of +-9/+-22/9/40 V. Ideal for automotive applications due to its small outline package and separate output feature.
DG412DY+
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4051BT,013
HEF4051BT,013 by NXP Semiconductors is an 8-channel CMOS multiplexer with a max supply voltage of 15V. It features a peak reflow temperature of 260°C and offers a nominal off-state isolation of 50dB. Ideal for industrial applications requiring precise signal switching within the temperature range of -40 to 85°C.
CD74HC4051M
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4634EUB-T
MAX4634EUB-T by Maxim Integrated is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V, featuring a max on-state resistance of 7 ohm and off-state isolation of 80 dB. This industrial-grade switch has a compact thin profile package suitable for various applications requiring precise signal routing in tight spaces.
ADG736BRMZ-REEL7
ADG736BRMZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 10 terminals, and 3V nominal voltage. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C. Features low on-state resistance of 12 ohm and fast switching times of 20 ns turn-on and 10 ns turn-off.
ADG658YRUZ-REEL7
ADG658YRUZ-REEL7 by Analog Devices is a CMOS multiplexer with 8 channels, 16 terminals, and common output. It operates at -40 to 125 °C, with on-state resistance of 400 ohm and switching time of 490 ns. Ideal for automotive applications due to its small size (5x4.4 mm) and low supply current (0.001 mA).
DG412DY
FSUSB30MUX
Onsemi
FSUSB30MUX by Onsemi is a 10-terminal DPDT multiplexer with 3.3V supply voltage, 1.1mm seated height, and 30dB off-state isolation. It features separate outputs, industrial temperature grade, and break-before-make switching for applications requiring high-speed signal routing in compact spaces.
FSA2257MUX
FSA2257MUX by Onsemi is a CMOS SPDT multiplexer with 2 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and nominal off-state isolation of 70 dB. Ideal for industrial applications requiring separate outputs and a supply voltage range of 1.65V to 5.5V in a small outline package with dual terminals.
HMC8038LP4CETR
Analog Devices' HMC8038LP4CETR is a 16-terminal SPDT multiplexer with a 3-5.4V supply range, operating from -40 to 105°C. Its square chip carrier package makes it ideal for industrial applications requiring precise signal switching in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA4157P6X
FSA4157P6X by Onsemi is a SPDT switch with 1.15 ohm Ron, 70 dB isolation, and 60 ns switch-on time. It operates in industrial temperature range and has a supply voltage of 1.65V to 5.5V. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
FSA4157AP6X
FSA4157AP6X by Onsemi is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 1.15 ohm and switching voltage of 3/5V, suitable for industrial applications requiring high isolation (70 dB) and fast response times (65 ns).
FSA4480UCX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 25; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA4476UCX
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 25; Package Code: UFBGA; Package Shape: SQUARE; Surface Mount: YES;
FSA4157AL6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA4157P6
FSA4157L6X
FSA4157L6X by Onsemi is a SPDT switch with 6 terminals, operating at -40 to 85°C. It features a max on-state resistance of 1.15 ohm and break-before-make switching at supply voltages ranging from 1.65V to 5.5V. This CMOS technology-based switch is ideal for industrial applications requiring high isolation levels and fast switching times.
FSA4157AP6
FSA4157AFHX
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
FSA4159P6X
FSA4157FHX
FSA4157P6X_NL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved