Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG1409YRUZ by Analog Devices is a 4-channel CMOS differential multiplexer with a max on-state resistance of 9 ohm and switching voltage of +-15/+12/+-5 V. It is designed for automotive applications, featuring a small outline package with dual terminals and matte tin finish, suitable for surface mount assembly.
Median Price
$9.830
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Verical
1+ parts
$4.785
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$9.360
$5.860
$5.140
Arrow
$9.442
$6.102
$5.723
Mouser Electronics
$6.300
$6.030
$5.910
DigiKey
$6.533
$6.031
$5.911
Newark
$9.840
$6.910
$6.200
Farnell
$10.270
$6.610
$6.180
Analog Devices Inc
$10.790
$4.190
Element14
$14.030
$9.330
$8.620
Digiode
$5.786
Nova Conductors
$6.670
TME
$9.850
Bristol Electronics
$10.944
$5.144
$4.925
Chip Stock
Vyrian
VNN
Component Sense
LIBRA Elektronik GmbH
Semi Source
LWI Electronics Inc
A&K Electronics
ComSIT Distribution GmbH
Prism Electronics
Semicontronic
$5.180
$5.050
$5.025
Ampacity Inc.
Corphita
$5.481
Netroflash
$6.337
$6.203
Parana Technologies
$7.718
$7.178
Vigor
$8.250
IDEA Electronic Components Group
$8.299
$7.884
Continental Prestige Electronics
$8.600
$6.440
$4.880
Component Stockers USA
$9.470
$7.090
$5.370
DigiPath Technology Company
$12.946
$12.429
Aztec Data Supply Inc.
$18.360
Advanced Electronics
$19.753
$17.975
$16.197
Corohmni
$23.340
Lixinc
Perfect Parts
Robosynatics
Lucentia Tech
$22.205
$21.752
RC Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Argo Parts USA
Speed Components Ltd (Excess)
Formix International (Excess)
This material provides durability and protection, making the product suitable for various environments.
Easily mounted on circuit boards, increasing efficiency in assembly.
Standard voltage level for compatibility with many electronic devices.
Allows for multiple connections, expanding the functionality of the product.
Can withstand high temperatures, suitable for industrial and automotive applications.
CMOS technology offers low power consumption and high noise immunity, improving overall performance.
Multiplexers & Switches ADG1409YRUZ attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADG1409YRUZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Diotec Semiconductor Ag
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Surge Components
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MAX399EEE
MAX399EEE by Maxim Integrated is a CMOS differential multiplexer with 4 channels. It operates at industrial temperature grade, with on-state resistance of 100 ohm and off-state isolation of 75 dB. Ideal for applications requiring precise signal switching in harsh environments.
DG508ACJ+
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG408BRU-REEL7
Analog Devices
ADG408BRU-REEL7 by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It is ideal for industrial applications requiring fast switching times (150 ns) and high off-state isolation (75 dB).
SN74LV4053AD
SN74LV4053AD by Texas Instruments is a CMOS multiplexer with 3 functions, operating at 2-5.5V. It features a max on-state resistance of 225 ohm and offers separate outputs. Ideal for industrial applications requiring high-speed switching with low power consumption.
TS5A23159DGST
TS5A23159DGST by Texas Instruments is a 2-channel SPDT switch with 1.8/5 V power supplies, 3.5 ohm Ron, and 105 kHz bandwidth. Ideal for industrial applications requiring low on-state resistance and high isolation levels in a compact thin profile package.
CD74HC4051E
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4052BE
Harris Semiconductor
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PTMUX1574DYYR
PTMUX1574DYYR by Texas Instruments is a 16-terminal SPDT multiplexer with a max on-state resistance of 4.5 ohm and nominal off-state isolation of 75 dB. It operates in temperatures ranging from -40 to 125 °C and is ideal for automotive applications due to its CMOS technology and small outline package style.
SN74LVC2G66DCUT
SN74LVC2G66DCUT by Texas Instruments is a CMOS SPST switch with 2 channels, 30 ohm Ron, and 5.6 ns switch-on time. It operates b/w -40 to 85 °C and has a nominal bandwidth of 300 kHz. Ideal for industrial applications requiring low power consumption and high-speed signal switching in compact designs.
ADG608TRUZ-REEL7
ADG608TRUZ-REEL7 by Analog Devices is a BICMOS technology-based single-ended multiplexer with 8 channels. It operates at a supply voltage of ±5V, has a max on-state resistance of 30 ohm, and offers an off-state isolation of 85 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
MAX14866UTM+
SPST; Temperature Grade: OTHER; No. of Terminals: 48; Package Code: FQFP; Package Shape: SQUARE; Surface Mount: YES;
MC74HC4051AN
Motorola
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4052M96E4
CD74HC4052M96E4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, 16 terminals, and common output. It operates at -55 to 125 °C with a max on-state resistance of 270 ohm. Ideal for military-grade applications requiring a small outline package and high off-state isolation of 65 dB.
MAX313FEPE
MAX313FEPE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm and switching voltage of 12/+-15 V. Ideal for industrial applications requiring high isolation and fast switch-on/off times in a compact IN-LINE package.
ADG5412BRUZ-REEL7
ADG5412BRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 11 ohm. It operates in automotive grade at -40 to 125 °C and has a supply voltage range of +-9/+-22/9/40 V. Ideal for applications requiring fast switching with separate outputs in compact designs.
PCA9546APWR
PCA9546APWR by Texas Instruments is a 4-channel multiplexer with 2.3-5.5V supply voltage range, 45 ohm on-state resistance, and 1ns switch-on/off time. Ideal for applications requiring separate outputs in a compact SOT package with -40 to 85°C operating temperature range.
SN74LV4052ADR
SN74LV4052ADR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 50 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
ADG601BRTZ-REEL
ADG601BRTZ-REEL by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 2.5 ohm and switching time of 120 ns. Ideal for industrial applications requiring low-profile switches with high isolation and fast response times.
ADG1436YRUZ
ADG1436YRUZ by Analog Devices is a 16-terminal SPDT multiplexer with 2 functions. Operating at -40 to 125 °C, it has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching times and high isolation levels.
ADG452BRUZ
ADG452BRUZ by Analog Devices is a 4-function multiplexer with a supply voltage range of 4.5V to 20V. It features a max on-state resistance of 12 ohm, switching type break-before-make, and off-state isolation of 65 dB. Ideal for industrial applications requiring precise signal routing in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADG1419BRMZ
ADG1419BRMZ by Analog Devices is a SPDT multiplexer with 8 terminals, operating at -40 to 125°C. It has a max on-state resistance of 3.2 ohm and switching voltage of +-5/+-15/12 V, making it ideal for automotive applications requiring precise signal routing in compact spaces.
ADG1636BRUZ
ADG1636BRUZ by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and is ideal for automotive applications requiring separate output switching with a nominal voltage of 5 V.
ADG1412YRUZ
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1436YRUZ-REEL7
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1414BRUZ-REEL7
ADG1414BRUZ-REEL7 by Analog Devices is an 8-function multiplexer with a supply voltage range of +-5/+-15/12V. It features a max on-state resistance of 25 ohm, switching at 320ns. Ideal for automotive applications due to its CMOS technology and compact design with dimensions of 7.8mm x 4.4mm x 1.2mm.
ADG1636BRUZ-REEL7
ADG1636BRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and has a small outline package suitable for automotive applications. With separate outputs and break-before-make switching, it offers high isolation of 70 dB.
ADG1419BRMZ-REEL7
ADG1419BRMZ-REEL7 by Analog Devices is a SPDT multiplexer with 8 terminals, operating voltage of +-5/+-15/12V. It has a max on-state resistance of 3.2 ohm and switching time of 140 ns. Ideal for automotive applications due to its BICMOS technology and small outline package design.
ADG1411YRUZ
ADG1404YRUZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1636BRUZ-REEL
ADG1206YCPZ-REEL7
ADG1206YCPZ-REEL7 by Analog Devices is a 32-terminal CMOS multiplexer with 16 channels. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 200 ohm. Ideal for automotive applications, this chip carrier switch offers a nominal voltage of +-15 V and very thin profile package style.
ADG1412YRUZ-REEL7
ADG1412YRUZ-REEL7 by Analog Devices is a 4-function SPST multiplexer with 16 terminals. It operates at -40 to 125 °C, with a max seated height of 1.2 mm and on-state resistance of 5.4 ohm. Ideal for automotive applications requiring CMOS technology and high isolation levels.
ADG1311YRUZ
ADG1311YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 200 ohm Ron, and 80 dB isolation. It operates in industrial temperature range (-40 to 105 °C) and has a small outline package suitable for multiplexing applications. With a max supply voltage of +-16.5 V, it offers fast switching times (180 ns on, 60 ns off).
ADG1414BCPZ-REEL7
ADG1414BCPZ-REEL7 by Analog Devices is an 8-function multiplexer & switch with a square package shape. It operates at a nominal voltage of 5V and has a max on-state resistance of 25 ohm. This IC is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
ADG1434YRUZ
ADG1434YRUZ by Analog Devices is a 20-terminal SPDT multiplexer with 4 channels. It operates at -40 to 125 °C and supports supply voltages of +-5, +12, +-15 V. Ideal for automotive applications due to its CMOS technology and compact design.
ADG1408YRUZ
ADG1408YRUZ by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 9 ohm. It operates at temperatures ranging from -40 to 125 °C and has a peak reflow temperature of 260 C. Ideal for automotive applications due to its small outline, thin profile package style and break-before-make switching technology.
ADG1606BRUZ
ADG1606BRUZ by Analog Devices is a 16-channel CMOS multiplexer with a max on-state resistance of 7.5 ohm and switching voltage of 8 V. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a compact rectangular package design suitable for surface mount assembly.
ADG1409YRUZ-REEL7
ADG1409YRUZ-REEL7 by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 9 ohm. With automotive temperature grade, it is suitable for applications requiring fast switching times in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved