Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' PCA9546APW,112 is a 4-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in industrial temperature grades (-40°C to 85°C) and has separate outputs with dual terminal positions. Ideal for applications requiring compact size and high performance in switching operations.
Median Price
$1.515
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.930
100+ parts
1k+ parts
10k+ parts
-
DigiKey
$2.100
Flip Electronics (Authorized)
Verical
Digiode
$0.884
Nova Conductors
$0.912
Vyrian
Anansix
SPM Sales
Zilex Electronics Inc.
Flip Electronics
Prism Electronics
Sea View Technologies
Bristol Electronics
Microfarads
ComSIT Distribution GmbH
Semicontronic
$0.790
$0.770
$0.766
Ampacity Inc.
Corphita
$0.837
Vigor
$0.880
Aranea Global
$0.894
$0.858
Continental Prestige Electronics
Argo Parts USA
Advanced Electronics
Aztec Data Supply Inc.
$6.040
Microchip USA
$8.255
Corohmni
$15.004
Modulus Dynamics
$24.599
Perfect Parts
UNI Independent Distributors
Authorized Procurement Solutions
Speed Components Ltd (Excess)
PLASTIC/EPOXY - Provides durability and flexibility in various applications.
YES - Ensures easy installation and space-saving design.
RECTANGULAR - Allows for efficient placement on circuit boards.
2.5 V - Provides stable and reliable power to the device.
16 - Offers versatile connectivity options for different setups.
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH - Ideal for compact and high-density designs.
85 °C - Ensures optimal performance even in high-temperature environments.
40 °C - Can operate in a wide range of temperatures.
NICKEL PALLADIUM GOLD - Provides excellent conductivity and corrosion resistance.
DUAL - Allows for multiple connection possibilities.
SEPARATE OUTPUT - Ensures clear and distinct output signals.
1.1 mm - Low profile design for space-constrained applications.
4.4 mm - Compact size for efficient use of board space.
SINGLE-ENDED MULTIPLEXER - Offers enhanced signal integrity and performance.
2.3 V - Can operate at lower voltage levels for energy efficiency.
30 - Can withstand reflow processes for efficient assembly.
260 - Handles high-temperature soldering processes.
55 ohm - Provides low resistance for minimal signal loss.
0.3 ns - Fast switching capability for quick response times.
5 mm - Compact size for space-saving installations.
0.3 ns - Ensures fast disconnection for dynamic applications.
INDUSTRIAL - Suitable for industrial environments with varying temperatures.
0.1 mA - Low power consumption for energy-efficient operation.
4 - Supports multiple input and output channels.
GULL WING - Facilitates easy soldering and reliable connections.
0.65 mm - Allows for precise spacing between terminals.
5.5 V - Handles higher voltage levels for versatile compatibility.
Multiplexers & Switches PCA9546APW,112 attributes and parameters. Explore more Multiplexers & Switches devices from NXP Semiconductors
Other IC type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
PCA9546APW,112 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices 27/Jul/2017 PCA95 EOL 16/Mar/2021
PCN Packaging - Date Code Extended 18/Jul/2013
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
DG408DY-T1
Vishay Intertechnology
Vishay Intertechnology's DG408DY-T1 is a CMOS single-ended multiplexer with 8 channels. It operates at industrial temperature grade (-40 to 85 °C) and has a max on-state resistance of 100 ohm. With a package size of 9.9mm x 3.9mm, it is ideal for applications requiring high-speed switching and low power consumption in various electronic systems.
77052012X
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
74HCT4051D,118
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA4157P6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BCM
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4564EUA
Maxim Integrated
MAX4564EUA by Maxim Integrated is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 60 ohm and switching time of 60 ns. Ideal for industrial applications requiring high isolation and low resistance in a compact package.
ADP1190ACBZ-R7
Analog Devices
SPST; Terminal Finish: TIN SILVER COPPER; JESD-609 Code: e1; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
HEF4051BT,652
NC7SZ66M5X
SPST; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
74HC4066D,652
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA2567UMX
FSA2567UMX by Onsemi is a 16-terminal multiplexer with a supply voltage range of 1.65V to 4.3V, offering separate outputs and low on-state resistance of 12 ohm. With a compact chip carrier package style and industrial temperature grade, it is ideal for applications requiring fast switching times and high isolation levels in electronic circuits.
ADG1206YCPZ-REEL7
ADG1206YCPZ-REEL7 by Analog Devices is a 32-terminal CMOS multiplexer with 16 channels. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 200 ohm. Ideal for automotive applications, this chip carrier switch offers a nominal voltage of +-15 V and very thin profile package style.
ADG408BRUZ-REEL
ADG408BRUZ-REEL by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm. It operates in industrial temperature grade range from -40 to 85 °C and has a supply current of 0.5 mA. Ideal for applications requiring high-speed switching and low on-state resistance in compact designs.
ADG201HSJNZ
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG715BRUZ-REEL7
ADG715BRUZ-REEL7 by Analog Devices is an 8-channel CMOS multiplexer with a supply voltage range of 2.25V to 2.75V. It has a small outline, thin profile package and is suitable for industrial applications requiring high isolation and low on-state resistance.
MPC506AU
The Texas Instruments MPC506AU is a single-ended multiplexer with 1 channel and a max on-state resistance of 1800 ohm. It operates at temperatures ranging from -40 to 85 °C and has a small outline package style. This multiplexer is commonly used in industrial applications requiring CMOS technology and a supply voltage of +-15 V.
ADG1604BRUZ-REEL
ADG1604BRUZ-REEL by Analog Devices is a 4-channel single-ended multiplexer with 1.2 ohm max on-state resistance and 177 ns switch-on time. It operates in automotive-grade temperature range (-40 to 125 °C) and has a small outline package suitable for surface mount applications. Ideal for signal switching in automotive electronics due to its low on-state resistance and fast switching speed.
DG212CJ
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG419DY+T
Analog Devices' DG419DY+T is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. Operating b/w -40 to 85°C, it offers a nominal voltage of ±15 V and off-state isolation of 68 dB. Ideal for industrial applications requiring fast switching times and low resistance.
FSUSB42UMX
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCA9548APW,118
NXP Semiconductors' PCA9548APW,118 is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates b/w -40°C to 85°C, has separate outputs, and a max seated height of 1.1mm. Ideal for applications requiring signal routing in compact spaces due to its small outline package style.
PCA9548ABS,118
NXP Semiconductors' PCA9548ABS,118 is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates b/w -40°C to 85°C, has separate outputs, and a max seated height of 1mm. Ideal for applications requiring signal routing in compact spaces due to its small form factor and low power consumption.
PCA9546APWR
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Supply Voltage (Vsup): 2.5 V;
PCA9546APW,118
PCA9546APW,118 by NXP Semiconductors is a 4-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in industrial temperature grades (-40°C to 85°C) and has separate outputs with a max switch-on/off time of 0.3 ns, making it ideal for applications requiring precise signal routing in compact spaces.
PCA9548ADW
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 7.5 mm;
PCA9548AD,118
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Operating Temperature: 85 Cel;
PCA9548ABSHP
NXP Semiconductors' PCA9548ABSHP is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V, low on-state resistance of 55 ohm, and fast switch-on/off times of 0.3 ns. Ideal for applications requiring separate outputs in a compact square chip carrier package with surface mount capability.
PCA9548ADWR
PCA9548ADWR by Texas Instruments is a multiplexer with 2 functions. It has a small outline package style and operates at temperatures ranging from -40 to 85 °C. It is commonly used for single-ended multiplexing applications.
PCA9546APWRG4
PCA9546APWRG4 by Texas Instruments is a 16-terminal multiplexer with 4 channels. It operates b/w -40 to 85°C, with a supply voltage range of 2.3V to 5.5V. Ideal for applications requiring separate outputs and low on-state resistance.
PCA9548AD,112
PCA9548AD,112 by NXP Semiconductors is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in temperatures from -40°C to 85°C, features separate outputs, and has a fast switch-on/off time of 0.3 ns making it ideal for applications requiring precise signal routing in compact designs.
PCA9546APWRE4
PCA9546APWRE4 by Texas Instruments is a 16-terminal multiplexer with a supply voltage range of 2.3V to 5.5V, offering separate outputs and low on-state resistance of 45 ohm. Ideal for applications requiring signal routing in compact spaces due to its small outline, thin profile package style and dual terminal position.
PCA9548APW,112
PCA9548APW,112 by NXP Semiconductors is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It features separate outputs, 0.3ns switch-on/off times, and operates b/w -40°C to 85°C. Ideal for applications requiring signal routing in compact spaces due to its small outline package design.
PCA9548APW
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 4.4 mm;
PCA9546APWT
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum On-state Resistance (Ron): 45 ohm;
PCA9546AD,118
PCA9546ABS,118
NXP Semiconductors' PCA9546ABS,118 is a 4-channel multiplexer with a supply voltage range of 2.3V to 3.6V and on-state resistance of 55 ohm. It operates in industrial temperature grade (-40 to 85 °C) and has separate outputs with fast switching times (0.3 ns). Ideal for applications requiring signal routing in compact spaces due to its small form factor (4x4 mm chip carrier package).
PCA9546APW
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .65 mm;
Philips Semiconductors
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved