Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; Transistor Element Material: SILICON; No. of Terminals: 8;
Median Price
$0.572
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.560
100+ parts
$0.638
1k+ parts
$0.458
10k+ parts
$0.358
Chip1Stop
$3.610
$1.510
$0.979
-
Rochester
$0.394
$0.327
$0.291
DigiKey
$0.490
Flip Electronics (Authorized)
Verical
$0.457
Digiode
$0.470
Nova Conductors
$0.567
Flip Electronics
DigiKey Marketplace
Vyrian
Chip Stock
Component Sense
Cyclops Electronics Ltd
Sunrise Surplus Inc.
Connector Distribution Corp
Right Parts Inc.
Netsource Technology, Inc.
Prism Electronics
A&K Electronics
Rotakorn
Bristol Electronics
Elcom Components
AGACORP
Ampacity Inc.
$0.421
Corphita
$0.446
Corohmni
$0.495
Argo Parts USA
$0.550
Continental Prestige Electronics
$0.555
Netroflash
Component Stockers USA
$1.020
$0.720
$0.480
Microchip USA
$3.438
RC Electronics
$0.610
$0.540
Metaverse IC Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
Problanco Electronics
GreenTree Electronics
Kulean Microsystems
Kepictronics
S.R.D Solutions
Authorized Procurement Solutions
Assy Fe
TANS Electronics
SupplyDigital Components
Supply Digital
UHIMA Technologies
Small Signal Field Effect Transistors (FET) FDMC8200 attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Fairchild Semiconductor
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDMC8200 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Design/Specification - Logo 17/Aug/2017
PCN Assembly/Origin - Qualify 2nd supplier 13/Aug/2020
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BS170
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Terminal Form: THROUGH-HOLE; Terminal Finish: TIN LEAD;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
2N7002P,235
NXP Semiconductors
NXP Semiconductors' 2N7002P,235 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.36A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C. Its PLASTIC/EPOXY package features GULL WING terminals and AEC-Q101 compliance.
2N7000BU
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
FDV305N
FDV305N by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 0.9A Drain Current, and 0.22ohm On Resistance. Ideal for SWITCHING applications in small outline packages with 3 terminals and operating up to 150°C.
BSS84
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .13 A; Minimum Operating Temperature: -55 Cel;
MGSF1N02LT1G
MGSF1N02LT1G by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 0.75A Drain Current, and 0.09 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with 150°C max temp.
BSS670S2LH6327XTSA1
Infineon's BSS670S2LH6327XTSA1 is a N-CHANNEL FET with 55V DS breakdown voltage, 0.54A ID, and 0.825 ohm RDS(on). Ideal for switching applications, it features a built-in diode in a small outline package suitable for surface mount technology.
FDN304PZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Application: SWITCHING; Peak Reflow Temperature (C): 260;
BSS84AK,215
NXP Semiconductors' BSS84AK,215 is a P-CHANNEL FET with 50V DS breakdown voltage and 0.18A drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a max power dissipation of 1.14W.
IRLHS6376TRPBF
IRLHS6376TRPBF by Infineon is a N-CHANNEL FET with 30V DS breakdown voltage and 3.4A max drain current, ideal for switching applications. It features separate elements with built-in diode in a small outline package, operating in enhancement mode at up to 150°C. With 0.082 ohm max on-resistance and 6.6W power dissipation, it offers reliable performance for various electronic designs.
FDMC8030
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.9 W; Terminal Position: DUAL; JESD-609 Code: e4;
LND150K1-G
Microchip Technology
LND150K1-G by Microchip is a N-CHANNEL FET with 500V DS breakdown voltage, ideal for switching applications. Operating in depletion mode, it has a max power dissipation of 0.36W and can handle a max drain current of 0.013A. With a temp range from -55 to 150 °C, this MOSFET is suitable for various electronic designs.
FDG8850NZ
FDG8850NZ by Onsemi is a N-CHANNEL FET with 2 elements and built-in diode, ideal for switching applications. It features a max drain current of 0.75A, on-resistance of 0.4 ohm, and breakdown voltage of 30V. With a small outline package style and operating temp up to 150°C, it's suitable for various electronic devices.
MMBFJ113
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; JESD-609 Code: e3; Maximum Drain-Source On Resistance: 100 ohm;
NDS356AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Position: DUAL; Maximum Time At Peak Reflow Temperature (s): 30;
SI2323DS-T1-BE3
Vishay Intertechnology
Vishay Intertechnology's SI2323DS-T1-BE3 is a P-CHANNEL FET with 20V DS breakdown voltage and 3.7A max drain current. Ideal for switching applications, it operates in enhancement mode with 0.039 ohm RDS(on) and 140pF Crss, suitable for surface mount designs at -55 to 150°C temperature range.
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
ZXMS6004FFTA
Diodes Incorporated
ZXMS6004FFTA by Diodes Inc. is a N-CHANNEL FET with 60V DS breakdown voltage, 0.6 ohm RDS(on), and built-in diode for switching applications. It's a small outline package with matte tin finish, suitable for enhancement mode operation in automotive electronics conforming to AEC-Q101 standard.
BSS138L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 3; Maximum Feedback Capacitance (Crss): 5 pF; Maximum Drain Current (ID): .2 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 14 W; Package Shape: SQUARE; Maximum Pulsed Drain Current (IDM): 50 A;
FDMC89521L
FDMC89521L by Onsemi is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max drain current of 8.2A and a max drain-source on resistance of 0.017 ohm.
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.9 W; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30;
FDMC8200S
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain Current (Abs) (ID): 46 A; Terminal Finish: NICKEL PALLADIUM GOLD;
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
FDMC007N30D
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Terminal Form: NO LEAD; Maximum Feedback Capacitance (Crss): 30 pF;
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDMC8200
FDMC8200 by Onsemi is a small signal N-CHANNEL FET with 2 elements and built-in diode, ideal for switching applications. It has a min DS breakdown voltage of 30V, max drain current of 18A, and max power dissipation of 1.9W. This surface mount transistor operates in enhancement mode and has a max operating temperature of 150°C.
FDMC6296
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Transistor Application: SWITCHING; No. of Terminals: 5;
FDMC7200
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Transistor Application: SWITCHING;
FDMC7200S
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 2; Maximum Drain Current (Abs) (ID): 18 A;
FDMC7208S
FDMC7208S by Onsemi is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It features a Max Drain Current of 26A, Max Power Dissipation of 1.9W, and Max Operating Temperature of 150°C. This small outline transistor has a square package and operates in ENHANCEMENT MODE.
FDMC7N30D
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
FDMC8097AC
N-CHANNEL AND P-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 14 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.9 W; JESD-30 Code: S-PDSO-N4; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Package Shape: SQUARE; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 1;
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; Operating Mode: ENHANCEMENT MODE; Terminal Form: NO LEAD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved