Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 43; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
$14.700
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$12.947
100+ parts
$10.116
1k+ parts
$9.119
10k+ parts
-
Chip1Stop
$13.300
$8.320
Mouser Electronics
$14.660
$11.170
$10.240
Newark
$11.210
$10.020
DigiKey
$16.130
$12.295
$11.694
Element14
$16.675
$12.717
$11.920
Farnell
$16.712
$12.446
$11.656
RS (Exports)
$17.853
$13.224
$12.433
Arrow
$8.496
Nova Conductors
$11.100
Digiode
$12.065
Rutronik
$9.810
Vyrian
TME
$10.219
IBS Electronics
$12.090
ComSIT Distribution GmbH
GLYN GmbH & Co. KG
Ampacity Inc.
$7.250
Semicontronic
$7.069
$7.032
Aztec Data Supply Inc.
$7.848
Modulus Dynamics
$8.220
$7.891
$7.562
Corohmni
$9.109
Bastille Electronics
$10.545
$9.879
Advanced Electronics
$11.109
$10.220
$9.576
Corphita
$11.430
Robosynatics
$6.792
$6.654
Lucentia Tech
Argo Parts USA
Continental Prestige Electronics
$11.800
Other Function Telecom Interface ICs CYBLE-416045-02 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Cypress Semiconductor
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
CYBLE-416045-02 Telecommunications trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8517.70.00.00
SB
Cypress Semiconductor was an American semiconductor design and manufacturing company. It offered NOR flash memories, F-RAM and SRAM Traveo microcontrollers, PSoC programmable system-on-chip solutions, analog and PMIC Power Management ICs, CapSense capacitive touch-sensing controllers, Wireless BLE Bluetooth Low-Energy and USB connectivity solutions. Its headquarters were in San Jose, California, with operations in the United States, Ireland, India and the Philippines. In April 2016, Cypress Semiconductors announced the acquisition of Broadcom’s Wireless Internet of Things Business. The deal was closed in July 2016. In June 2019, Infineon Technologies announced it would acquire Cypress for $9.4 billion.The deal closed in April 2020, making Infineon one of the world's top 10 semiconductor manufacturers. Some of its main competitors included Microchip Technology, NXP Semiconductors, Renesas Electronics and Micron Technology.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
International Devices
XB3-24Z8CM
Digi International
The Digi International XB3-24Z8CM is a surface mount telecom IC with 34 terminals. It operates in industrial temperature range (-40 to 85°C) and has a rectangular package shape (13x19mm). Ideal for telecom circuits, this IC is designed for various applications requiring reliable performance in harsh environments.
NINA-B112-01B-00
U-blox Ag
TELECOM CIRCUIT;
BG96MATEA-128-SGN
Quectel Wireless Solutions
BG96MATEA-128-SGN by Quectel is a surface mount telecom IC with 102 terminals. It operates at temperatures ranging from -35 to 75 °C and has a data rate of 0.375 Mbps. This IC is commonly used in applications requiring reliable and high-speed communication.
LM2893M
LM2893M by Texas Instruments is a telecom IC with 20 terminals in a small outline package. It operates b/w -40°C to 85°C, suitable for industrial use. With a nominal voltage of 18V, it is designed for telecom circuit applications.
TDA7116FHTMA1
Infineon Technologies
TDA7116FHTMA1 by Infineon is a telecom IC with 10 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and dual terminal position. This IC is suitable for telecom circuits requiring a nominal voltage of 3V in industrial temperature environments.
XB3-24AUM
The Digi International XB3-24AUM is a TELECOM CIRCUIT with 1 Mbps Data Rate. It operates b/w -40 to 85 °C, making it suitable for telecom applications. The RECTANGULAR package shape and SPECIAL SHAPE style enhance its performance in telecom interface ICs.
AX5043-1-TW30
AX5043-1-TW30 by Onsemi is a telecom IC with CMOS technology, operating at -40 to 85°C. It features a data rate of 0.125 Mbps, 28 terminals in a square chip carrier package, and terminal pitch of 0.5 mm. Ideal for telecom circuits, this IC has a nominal voltage of 3V and peak reflow temperature of 260°C.
JODY-W374-00B
BGM13P22F512GA-V2
Silicon Labs
XBP9X-DMUS-001
XBP9X-DMUS-001 by Digi Int. is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 37 terminals, operating from -40 to 85 °C at 3.3V. It's a 0.25 Mbps TELECOM CIRCUIT IC ideal for telecom interfaces due to its surface mount capability and NO LEAD terminal form.
MLX90109EDC-AAA-000-RE
Melexis N V
MLX90109EDC-AAA-000-RE by Melexis N V is an 8-terminal telecom IC with a small outline package. Operating from -40 to 85°C, it has a nominal voltage of 5V and matte tin terminal finish. Widely used in telecom circuits, this IC is designed for industrial-grade applications.
HMC641ALP4ETR
Analog Devices
HMC641ALP4ETR by Analog Devices is a telecom interface IC with 24 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial applications. With a nominal negative supply voltage of -3V and terminal pitch of 0.5mm, it is ideal for telecom circuit designs requiring compact and high-performance solutions.
RN4678APL-V/RM100
Microchip Technology's RN4678APL-V/RM100 is a surface mount telecom IC with 33 terminals. Operating temperature range from -20 to 70°C, suitable for commercial applications. Nominal voltage of 1.9V, compact size of 12x22mm makes it ideal for telecom circuit integration.
AP22811BW5-7
Diodes Incorporated
Diodes Inc.'s AP22811BW5-7 is a 5-terminal, telecom interface IC with matte tin finish. Operating temp range -40 to 85°C. Telecom circuit type with nominal voltage of 5V. Ideal for industrial applications requiring small outline, low profile package style.
RN41-I/RM630
Microchip Technology's RN41-I/RM630 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and gold over nickel terminal finish. Suitable for industrial applications, it comes in a rectangular package style with surface mount capability.
RN41-I/RM
Microchip Technology's RN41-I/RM is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and matte tin finish, suitable for industrial applications requiring surface mount packaging in a compact rectangular shape.
U2270B-MFPY
Atmel
U2270B-MFPY by Atmel is a telecom interface IC with 1 function. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 105 °C. It is commonly used in telecom circuits for various applications.
MGM240PB32VNA3
HMC624ALP4ETR
Analog Devices' HMC624ALP4ETR is a 24-terminal CMOS telecom IC with a square chip carrier package. Operating from -40 to 85°C, it has a very thin profile and matte tin finish. Ideal for telecom circuits, this IC has a terminal pitch of 0.5mm and no lead terminal form.
STKNX
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CYBLE-222014-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 22; Package Shape: SQUARE; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
CYBLE-222014-01 by Infineon Technologies is a surface mount telecom IC with 22 terminals. It operates at temperatures ranging from -40 to 85 °C and has a seated height of 1.9 mm. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
CYBLE-416045-02
CYBLE-416045-02 by Infineon Technologies is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a data rate of 8000 Mbps and operates at a nominal voltage of 3V. This surface-mount IC is ideal for industrial applications requiring high-speed telecommunications interfaces.
CYBLE-212006-01
Infineon Technologies' CYBLE-212006-01 is a surface mount telecom IC with 1 function. It has a rectangular package shape, 30 terminals, and a max seated height of 2mm. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications.
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 30; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
CYBLE-214015-01
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Shape: SQUARE; Nominal Supply Voltage: 3.3 V;
CYBLE-214015-01 by Infineon Technologies is a surface mount telecom IC with 1 function and 32 terminals. It has a square package shape, measuring 11mm in width and length, with a max seated height of 1.8mm. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications.
CYBLE-224116-01
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Shape: RECTANGULAR; No. of Functions: 1;
CYBLE-022001-00
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3;
CYBLE-212020-01
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-N31;
CYBLE-212020-01 by Infineon is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
CYBLE-012011-00
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
CYBLE-012011-00 by Infineon: Telecom IC with 31 terminals, 3.3V supply voltage, and -40 to 85°C operating temp. Ideal for telecom circuits in industrial applications due to its compact rectangular package and surface mount capability.
CYBLE-212019-00
CYBLE-212019-00 by Cypress: Telecom IC with 31 terminals, 3.3V supply voltage, and -40 to 85°C operating temp. Ideal for telecom circuit applications due to its compact rectangular package style and surface mount capability.
CYBLE-212023-10
CYBLE-014008-00
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
CYBLE-202007-01
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 30; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved