Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SM91527L-E is a DATACOM TRANSFORMER with 150uH inductance, 7640V isolation voltage, and 1:1 turns ratio. Ideal for pulse applications, it has CUL and UL approvals, operates b/w -40 to 125 °C, and comes in TR packing at 9.5x12.5x28mm size for surface mount installation.
Median Price
$5.871
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$6.790
100+ parts
$5.522
1k+ parts
-
10k+ parts
Mouser Electronics
$5.210
$4.820
$4.660
Newark
$7.570
$6.500
Arrow
$4.611
Farnell
$4.340
$4.190
Element14
$7.300
$7.050
Master Electronics
$4.990
$4.670
$4.650
Verical
$5.494
Chip1Stop
$4.310
Electro Sonic
$4.550
$4.240
IBS Electronics
$7.036
$6.585
$6.556
Nova Conductors
Ampacity Inc.
$3.550
Eastek
$4.230
Glotronic Ltd.
Continental Prestige Electronics
$3.710
$3.370
Aranea Global
Having CUL and UL approvals ensures that the product meets safety standards and regulations, making it a reliable and trustworthy choice for use in various applications.
The high isolation voltage of 7640 V enhances the safety and protection of the circuit by effectively isolating the input and output signals, preventing any potential damage or interference.
The inductance of 150 uH helps in regulating the flow of current and voltage, improving the efficiency and performance of the transformer in data communication applications.
The TR, 13 INCH packing method ensures secure and convenient packaging for transportation and storage, reducing the risk of damage or misplacement during handling.
The wide operating temperature range of -40 °C to 125 °C allows the transformer to function effectively in both extreme cold and hot environments, making it versatile and reliable for various applications.
The compact size of the transformer (9.5 mm x 12.5 mm x 28 mm) makes it suitable for space-constrained installations while still delivering high performance and efficiency.
Being specifically designed as a Datacom transformer ensures that it is optimized for data communication applications, offering reliable and stable signal transmission.
The surface mounting feature allows for easy and secure installation on PCBs, saving space and simplifying the assembly process.
The 1:1 turns ratio ensures a direct and equal distribution of voltage and current between the primary and secondary coils, maintaining signal integrity and stability in data communication applications.
Pulse & Datacom Transformers SM91527L-E attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bourns
Additional Features:
Application:
Approvals (V):
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
SM91527L-E Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Panjit International
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
78602/8C
Murata Manufacturing
Murata Manufacturing's 78602/8C is a pulse transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, measures 6.35mm (H) x 9mm (W) x 9.52mm (L), and has a turns ratio of 1:1:1.
TG1G-S002NZRL
Halo Electronics
TG1G-S002NZRL by Halo Electronics is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for 10/100 BASE-TX Ethernet applications with operating temperatures from 0 to 70°C. Compact surface mount design measuring 5.84mm x 12.19mm x 17.18mm.
M21038/27-07
Hytronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27; Approvals (V): MIL-PRF-21038/27E; Application: GENERAL PURPOSE; Width: 8.89 mm;
749020023A
Wuerth Elektronik & Kg
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
100B-1003XT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm); Maximum Operating Temperature: 125 Cel;
TG1G-E012NZLF
TG1G-E012NZLF by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is suitable for applications such as 10/100 BASE-TX Ethernet, with a temperature range of -40 to 85 °C.
750311457
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
DA102JC-R
Murata Manufacturing's DA102JC-R is a Pulse & Datacom Transformer with 2000V isolation voltage, 1900uH inductance, and 20 V-us min ET product. Ideal for data transmission applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 6.35mm x 9mm x 9.52mm.
78250VC
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 78250; Terminal Finish: Bright Tin (Sn); Inductance (Primary): 1000 uH; JESD-609 Code: e3;
100B-1003X
Pulse Electronics
100B-1003X by Pulse Electronics is a DATACOM TRANSFORMER with inductance of 350uH, suitable for 10/100 BASE-TX applications. It operates b/w -55 to 125°C, has dimensions of L12.7xB6.73xH5.97 mm, and features a turns ratio of 1:1 for surface mount assembly in TAPE & REEL packaging.
M21038/27-05
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Length: 12.7 mm; Minimum Operating Temperature: -55 Cel; Dimensions: L12.7XB8.89XH6.35 (mm);
Defense Logistics Agency
M21038/27-07 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. This through-hole mounted transformer with a turns ratio of 1:1.41 is ideal for datacom applications requiring reliable signal transmission in compact spaces.
S5394-CLD
Coilcraft
Coilcraft's S5394-CLD is a pulse transformer with 1500V isolation voltage, 400uH primary inductance, and 32 V-us min ET product. Ideal for gate drive applications, this surface mount transformer operates b/w -40 to 85°C with a compact size of L6.99xB6.6xH5.46 mm.
Q1553-22
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-22; Maximum Operating Temperature: 130 Cel; Application: GENERAL PURPOSE; Width: 8.89 mm;
74981104402
Wurth Elektronik 74981104402 is a LAN transformer with 4 functions, 2250V isolation voltage, and 350uH inductance. It operates b/w -40 to 85 °C and has dimensions of 16.9mm x 16.05mm x 16.7mm for through-hole mounting applications.
1011
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
749020011A
749020011A by Wuerth Elektronik & Kg is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. Featuring 1dB insertion loss, it has primary inductance of 350uH. Ideal for applications like LAN and 1000 BASE-T, this surface mount transformer operates b/w -40°C to 85°C.
74050
Pico Electronics
The Pico Electronics 74050 pulse transformer features an isolation voltage of 500V, inductance of 3700uH, and min ET product of 50V-us. Ideal for MIL-PRF-21038 approved applications requiring reliable data transmission and pulse signal processing in a compact L11.43xB11.43xH7.11 mm package.
PM-DB2745L+
Holt Integrated Circuits
PM-DB2745L+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 16.0x16.0x3.973 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and features matte tin terminal finish for surface mount applications in data bus interfaces.
P0544NLT
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 9 mm; Additional Features: LENGTH AND BREADTH DIMENSION INCLUDES TERMINAL ALSO; Isolation Voltage: 1500 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SM91502ALA-E
Bourns
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Isolation Voltage: 4300 V; Length: 7.62 mm; Turns Ratio (Np:Ns): 1:1;
SM91501ALO-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, UL; No. of Functions: 2; Height: 5 mm; Turns Ratio (Np:Ns): 1:1;
SM91501AL-E
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
SM91514AL-E
Bourns SM91514AL-E is a pulse transformer with 300uH primary inductance and 1:1 turns ratio. It offers 4300V isolation voltage, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for datacom applications due to its compact size (7.62x6.73x5.72mm) and surface mount feature in TR packing method.
SM91076L-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 2250 V; Application: 10/100 BASE-T; Packing Method: TR, 13 INCH; No. of Functions: 1;
SM91502ALE
Bourns SM91502ALE is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. Ideal for pulse applications, it has a turns ratio of 1CT:1CT and operates b/w -40 to 125 °C temperature range.
SM91071AL-E
Bourns SM91071AL-E is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T applications, it operates b/w -40 to 125 °C with a compact size of 12.8mm x 6.9mm x 5.65mm for surface mount installation.
SM91072AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Functions: 2; Length: 12.8 mm; Dimensions: L12.8XB6.9XH5.65 (mm);
SM91073AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Turns Ratio (Np:Ns): 1:1; Inductance (Primary): 350 uH; Maximum Operating Temperature: 125 Cel;
SM91074AL-E
Bourns SM91074AL-E is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 350uH Inductance, and AEC-Q200 Approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 125°C temperature range in surface mount configuration.
SM91508AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Functions: 1; Application: SIGNAL; Inductance (Primary): 300 uH;
SM91519L-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): CUL; UL; Packing Method: TR, 13 INCH; Turns Ratio (Np:Ns): 1:1; Isolation Voltage: 6400 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved