Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SM91076L-E is a DATACOM TRANSFORMER with 350uH inductance, 2250V isolation voltage, and 1:1 turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 125°C. This surface mount transformer measures 13.3mm x 7.4mm x 6.1mm (LxWxH).
Median Price
$3.317
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.960
100+ parts
-
1k+ parts
10k+ parts
Arrow
$3.346
DigiKey
$4.660
$3.796
$3.641
TTI
$2.870
RS (Exports)
$3.550
$3.360
Verical
$3.288
Nova Conductors
$2.745
Vyrian
Ampacity Inc.
$2.160
Netroflash
$2.690
$2.608
$2.553
High isolation voltage ensures safety and reliability in data communication applications.
With a high inductance value, this transformer is able to efficiently filter out noise and provide stable signal transmission.
The TR packing method in a 13 INCH form factor allows for easy installation and integration into various datacom systems.
Designed specifically for 10/100 BASE-T applications, ensuring compatibility and optimal performance in data transmission.
The high maximum operating temperature ensures the transformer can withstand intense operating conditions without performance degradation.
With a low minimum operating temperature, this transformer is suitable for use in a wide range of environments and climates.
Compact size enables easy installation in space-constrained datacom systems.
Narrow width allows for flexibility in placement and alignment within the system layout.
Specifically designed for datacom applications, ensuring optimal performance and compatibility.
Surface mount feature simplifies the installation process and saves space on the PCB.
Optimal length for the transformer ensures minimal signal loss and efficient signal transfer.
Equal turns ratio ensures balanced signal transmission, improving overall data integrity and reliability.
Pulse & Datacom Transformers SM91076L-E attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bourns
Additional Features:
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
SM91076L-E Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
General Diode
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
7490220121
Wuerth Elektronik & Kg
7490220121 by Wurth Elektronik is a pulse & datacom transformer with 4 functions and an isolation voltage of 1500 V. It has an inductance of 350 uH and is suitable for applications such as 1000 BASE-T.
PM-DB2745L+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 1; Turns Ratio (Np:Ns): 1:2.5; Height: 3.937 mm;
750311591
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
1011
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Height: 15.75 mm; Minimum ET Product: 200 V-us;
PM-DB2791S
Holt Integrated Circuits
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
IT234
Schaffner Holding Ag
IT234 by Schaffner Holding Ag is a pulse transformer with dimensions of L27.0XB22.5XH13.7 (mm). It has a max pulse rise time of 1000 ns and an inductance of 17000 uH. This transformer is commonly used for gate drive applications, with a temperature range of -25 to 70 °C.
PM-DB2725EX
PM-DB2725EX by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions 10.16x10.16x6.1mm. It operates b/w -55°C to 130°C, featuring Tin/Lead terminal finish and a turns ratio of 1:2.5 for DATA BUS INTERFACE applications via THROUGH HOLE MOUNTING.
78613/4C
Murata Manufacturing
Murata Manufacturing's 78613/4C is a pulse transformer with 1000V isolation voltage, 67uH inductance, and 4 V-us min ET product. Ideal for datacom applications, it features through-hole mounting, compact dimensions of 6.35mm x 9mm x 9.52mm, and a turns ratio of 1CT:1.
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
HM6098NLT
Pulse Electronics
HM6098NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 120uH inductance. Ideal for surface mount applications, it operates b/w -40 to 105°C and has a turns ratio of 1:1.
SM91501AL-E
Bourns
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
96046213059
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 12.5 mm; Maximum Operating Temperature: 85 Cel; Length: 14 mm; Minimum Operating Temperature: -40 Cel;
8447
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 14.81 mm; Height: 5.84 mm; No. of Functions: 1; Inductance (Primary): 350 uH;
TG110-S050N2LFTR
Halo Electronics
TG110-S050N2LFTR by Halo Electronics is a Pulse & Datacom Transformer with 2 functions and 1500V isolation voltage. It has primary inductance of 0.4uH, suitable for 10/100 BASE-TX applications. This surface mount transformer operates b/w 0-70°C, measuring L12.7xB7.11xH5.08mm in dimensions.
DA2099-ALD
Coilcraft
Coilcraft's DA2099-ALD is a Pulse & Datacom Transformer with 1500V isolation voltage, 3790uH primary inductance, and 221 V-us min ET product. Ideal for data communication applications, this surface mount transformer has dimensions of L13.0xB11.5xH6.5 mm and operates b/w -40 to 125°C temperature range.
H1187NL
H1187NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for Ethernet applications like 10/100 BASE-TX, featuring dimensions of L7.62xB7.0xH6.35 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installation in various electronic devices.
DA2319-ALC
Coilcraft's DA2319-ALC is a pulse transformer with 1500V isolation voltage, 296uH primary inductance, and 25.8 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C and features tin/silver terminal finish.
H1102NLT
H1102NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It has dimensions of L12.7xB7.11xH5.99 mm and operates b/w 0-70°C. Ideal for 10/100 BASE-T and AUTOMDIX applications, it features a 1:1 turns ratio and surface mounting feature.
PM-DB2725EX+
PM-DB2725EX+ by Holt Integrated Circuits is a MIL-STD-1553 approved datacom transformer with dimensions of 10.16x10.16x6.1 mm. It operates b/w -55°C to 130°C, has turns ratios of 1:2.5 and 1:1.79, and uses matte tin terminal finish. Ideal for data bus interfaces, it features through-hole mounting for reliable performance in various applications.
750311625
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SM91502ALA-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Isolation Voltage: 4300 V; Length: 7.62 mm; Turns Ratio (Np:Ns): 1:1;
SM91501ALO-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, UL; No. of Functions: 2; Height: 5 mm; Turns Ratio (Np:Ns): 1:1;
SM91514AL-E
Bourns SM91514AL-E is a pulse transformer with 300uH primary inductance and 1:1 turns ratio. It offers 4300V isolation voltage, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for datacom applications due to its compact size (7.62x6.73x5.72mm) and surface mount feature in TR packing method.
SM91502ALE
Bourns SM91502ALE is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. Ideal for pulse applications, it has a turns ratio of 1CT:1CT and operates b/w -40 to 125 °C temperature range.
SM91071AL-E
Bourns SM91071AL-E is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T applications, it operates b/w -40 to 125 °C with a compact size of 12.8mm x 6.9mm x 5.65mm for surface mount installation.
SM91527L-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): CUL; UL; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 7640 V; Length: 28 mm;
SM91072AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Functions: 2; Length: 12.8 mm; Dimensions: L12.8XB6.9XH5.65 (mm);
SM91073AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Turns Ratio (Np:Ns): 1:1; Inductance (Primary): 350 uH; Maximum Operating Temperature: 125 Cel;
SM91074AL-E
Bourns SM91074AL-E is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 350uH Inductance, and AEC-Q200 Approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 125°C temperature range in surface mount configuration.
SM91508AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Functions: 1; Application: SIGNAL; Inductance (Primary): 300 uH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved