Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SM91072AL-E is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 125°C and has a compact size of L12.8xB6.9xH5.65 mm for surface mount installation.
Median Price
$2.884
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.290
100+ parts
$1.840
1k+ parts
-
10k+ parts
Arrow
$2.303
Master Electronics
$2.849
$2.590
$2.490
$2.410
Verical
$3.746
$2.846
$2.690
$2.446
Mouser Electronics
$3.880
$3.030
$2.730
$2.640
DigiKey
$2.919
$2.710
Farnell
$2.660
$2.360
$2.190
Element14
$4.480
$4.000
$3.700
Newark
$3.790
$3.490
TTI
IBS Electronics
$4.560
$4.145
$3.694
$3.525
TME
$2.470
NAC Semi
$3.100
Nova Conductors
Ampacity Inc.
$4.130
Continental Prestige Electronics
$2.080
$1.720
$1.580
Aranea Global
This product meets the stringent requirements of the AEC-Q200 automotive standard, ensuring high quality and reliability for automotive applications.
Having 2 functions in one transformer can provide cost savings and efficiency in system design.
High isolation voltage ensures safety and protection for sensitive components in the circuit.
The inductance value of 350 uH is suitable for pulse and data communication applications, ensuring optimal performance.
The Tape and Reel packing method makes it convenient for automated assembly processes, saving time and reducing errors.
Compact size allows for space-saving installation in devices with limited space constraints.
Specifically designed for 10/100 BASE-T Ethernet applications, ensuring compatibility and optimal performance in networking devices.
High maximum operating temperature range allows for reliable operation in a variety of environmental conditions.
Wide temperature range from -40°C to 125°C allows for operation in both extreme cold and hot conditions.
Designed specifically for data communication applications, ensuring efficient data transmission and signal integrity.
Surface mount design facilitates easy and convenient installation on PCBs, saving assembly time and space.
The 1:1 turns ratio simplifies the design and ensures balanced signal transmission in the circuit.
Pulse & Datacom Transformers SM91072AL-E attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bourns
Additional Features:
Application:
Approvals (V):
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
SM91072AL-E Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
Weitron Technology
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
HX5084NL
Pulse Electronics
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
74050
Pico Electronics
The Pico Electronics 74050 pulse transformer features an isolation voltage of 500V, inductance of 3700uH, and min ET product of 50V-us. Ideal for MIL-PRF-21038 approved applications requiring reliable data transmission and pulse signal processing in a compact L11.43xB11.43xH7.11 mm package.
PT61018AAPEL-S
Bourns
Bourns PT61018AAPEL-S is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 5.65mm x 6.9mm x 12.8mm.
M21038/27-29T
Defense Logistics Agency
M21038/27-29T by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55 to 130 °C. Ideal for datacom applications, it features a 1:1.79 turns ratio and through-hole mounting for easy installation.
1025
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Height: 15.75 mm; Inductance (Primary): 24000 uH;
1011
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Height: 15.75 mm; Minimum ET Product: 200 V-us;
DA102JC-R
Murata Manufacturing
Murata Manufacturing's DA102JC-R is a Pulse & Datacom Transformer with 2000V isolation voltage, 1900uH inductance, and 20 V-us min ET product. Ideal for data transmission applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 6.35mm x 9mm x 9.52mm.
1000B-5002XT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100/1000 BASE-T; No. of Functions: 4; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 125 Cel;
78613/3JC
Murata Manufacturing's 78613/3JC is a pulse transformer with 1000V isolation voltage, 190uH primary inductance, and 6V-us min ET product. Ideal for surface mount applications in datacom systems due to its compact size (6.35mm x 9mm x 12.7mm) and turns ratio of 1CT:1.
ALANS100X1-1E10LT
Abracon
ALANS100X1-1E10LT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5x11.7x14.8mm) and surface mounting feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
TG110-S050N2
Halo Electronics
TG110-S050N2 by Halo Electronics is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 2.5ns max pulse rise time. Ideal for Ethernet applications, it operates b/w 0-70°C and has dimensions of L12.7xB7.11xH5.08mm for surface mount installation.
PM-DB2745S+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Height: 3.937 mm; Width: 16 mm;
PM-DB2725EX+
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; No. of Functions: 1; Maximum Operating Temperature: 130 Cel; Height: 6.1 mm;
HX1224CNL
HX1224CNL by Pulse Electronics is a Datacom Transformer with 4000V isolation voltage, 350uH primary inductance, and 1:1 turns ratio. It is ideal for surface mount applications in data communication and networking equipment due to its compact size and temperature range of -40°C to 85°C.
H7028NL
H7028NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It features primary inductance of 120uH, dimensions L13.72xB12.19xH5.71mm, and operates b/w 0-70°C. Ideal for surface mount applications in data communication systems due to its compact size and reliable performance.
760301306
Wuerth Elektronik & Kg
760301306 by Wurth Elektronik is a Pulse Transformer with an Isolation Voltage of 2500V, Inductance of 1800uH, and Min ET Product of 140V-us. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C and has a compact size of 11mm x 10.5mm.
1016C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Terminal Finish: Matte Tin (Sn); Height: 15.75 mm; Minimum Operating Temperature: 0 Cel; Length: 15.06 mm;
M-21038/27-05
Data Device
Data Device's M-21038/27-05 is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage and 150ns max pulse rise time. Measuring L12.7xB8.89xH6.35 mm, it operates b/w -55°C to 130°C. Ideal for applications requiring precise signal transmission in compact spaces.
M21038/27-05
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-05; Height: 6.35 mm; Minimum Operating Temperature: -55 Cel; Dimensions: 12.7mm X 8.89mm X 6.35mm;
74080
The Pico Electronics 74080 pulse transformer features an isolation voltage of 500V, inductance of 200uH, and min ET product of 12V-us. Ideal for MIL-PRF-21038 approved applications requiring a compact transformer with dimensions L11.43xB11.43xH7.11mm and operating temperatures from -55°C to 130°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SM91502ALA-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Isolation Voltage: 4300 V; Length: 7.62 mm; Turns Ratio (Np:Ns): 1:1;
SM91501ALO-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, UL; No. of Functions: 2; Height: 5 mm; Turns Ratio (Np:Ns): 1:1;
SM91501AL-E
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
SM91514AL-E
Bourns SM91514AL-E is a pulse transformer with 300uH primary inductance and 1:1 turns ratio. It offers 4300V isolation voltage, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for datacom applications due to its compact size (7.62x6.73x5.72mm) and surface mount feature in TR packing method.
SM91076L-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 2250 V; Application: 10/100 BASE-T; Packing Method: TR, 13 INCH; No. of Functions: 1;
SM91502ALE
Bourns SM91502ALE is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. Ideal for pulse applications, it has a turns ratio of 1CT:1CT and operates b/w -40 to 125 °C temperature range.
SM91071AL-E
Bourns SM91071AL-E is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T applications, it operates b/w -40 to 125 °C with a compact size of 12.8mm x 6.9mm x 5.65mm for surface mount installation.
SM91527L-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): CUL; UL; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 7640 V; Length: 28 mm;
SM91073AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Turns Ratio (Np:Ns): 1:1; Inductance (Primary): 350 uH; Maximum Operating Temperature: 125 Cel;
SM91074AL-E
Bourns SM91074AL-E is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 350uH Inductance, and AEC-Q200 Approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 125°C temperature range in surface mount configuration.
SM91508AL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Functions: 1; Application: SIGNAL; Inductance (Primary): 300 uH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved