Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3386P-1-103T is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has linear resistance law, operates b/w -55 to 125 °C, and features a vertical actuator for PCB mounting applications.
Median Price
$3.070
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.172
1k+ parts
$1.819
10k+ parts
$1.605
Mouser Electronics
$2.170
$1.790
$1.600
Vyrian
-
VNN
ACDS - Activité Composants Distribution Service
Bristol Electronics
$1.353
Dan-Mar Components
Electronics Depot
Elcom Components
Nova Conductors
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Assy Fe
Perfect Parts
Aranea Global
The small lead diameter allows for easy installation and connection, making it convenient to use.
With a rated temperature of 85°C, this variable resistor can function effectively within a wide range of operating temperatures.
The vertical orientation of the actuator provides easy access for adjustment and ensures precise control.
The use of cermet technology ensures high reliability, stability, and precision in resistance values.
The rectangular package shape allows for efficient placement and mounting on PCBs, saving space.
The linear law of resistance ensures a direct and predictable relationship between resistance value and position, making it suitable for various applications.
The tube packing method provides protection during storage and transportation, preventing damage to the variable resistor.
With a resistance value of 10000 ohms, this variable resistor offers a wide range of options for precise resistance adjustment.
Having three terminals allows for flexible circuit connections and adjustments, providing versatility in use.
The PCB mount package style ensures easy integration into circuit boards, making it suitable for various electronic devices.
The wire terminal shape provides a secure and stable connection, ensuring reliable performance in different environments.
With a maximum operating temperature of 125°C, this variable resistor can withstand high-temperature conditions without compromising performance.
The low temperature coefficient of 100 ppm/°C ensures minimal resistance drift with changes in temperature, maintaining accuracy in resistance values.
The tin/lead terminal finish provides corrosion resistance and solderability, ensuring durability and long-term reliability.
The length of the lead allows for easy installation and connection, providing flexibility in circuit design and layout.
The compact height of the package saves space and allows for efficient component placement in electronic assemblies.
As a trimmer resistor, this product offers precise and fine adjustments to resistance values, making it ideal for calibration and tuning applications.
The knob actuator type allows for easy and intuitive adjustment of resistance values, providing user-friendly operation.
With a tolerance of 10%, this variable resistor provides accurate and consistent resistance values, ensuring reliability in circuit performance.
The length of the package offers a balance between compact size and ease of handling, making it suitable for various electronic applications.
The through-hole mounting type allows for secure and stable installation on PCBs, ensuring reliable performance even in demanding environments.
With a rated power dissipation of 0.5 watts, this variable resistor can handle moderate power levels without overheating or performance degradation.
The width of the package provides a compact footprint, allowing for space-efficient integration into electronic assemblies.
With a rotation angle of 280°, the variable resistor offers a wide range of adjustment options for precise control and tuning.
Variable Resistors 3386P-1-103T attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3386P-1-103T Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
World Products
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Pulse Electronics
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
53CAD-E12-H15L
Bourns
Bourns 53CAD-E12-H15L is a linear potentiometer with 10000 ohm resistance, 5% tolerance, and 1W power dissipation. It has a CERMET technology and operates b/w -40 to +125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
RV4NAYSD103A
Ohmite Manufacturing
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; No. of Terminals: 3;
T93XA104KT20
Vishay Sfernice
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 10 %;
RK27112A00AK
Alps Alpine
Alps Alpine RK27112A00AK is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It has a shaft actuator, through-hole mounting, and PCB package style. Ideal for applications requiring precise voltage or current control in electronic circuits.
67WR200KLFTB
Tt Electronics Plc
67WR200KLFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications with a max operating temperature of 125°C and an operating voltage of 200V. Ideal for precision adjustments in electronic circuits requiring a trimmer resistor with a tolerance of 10%.
RV6LAYSA103A
Tokyo Cosmos Electric
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
3306W-1-103
Bourns 3306W-1-103 is a linear trimmer resistor with 10000 ohm resistance, rated for 0.2 W power dissipation and 25% tolerance. It operates b/w -25 to 100 °C and has a temperature coefficient of 250 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
RK09K12C0A19
RK09K12C0A19 by Alps Alpine is a linear potentiometer with 1 turn and a resistance of 10k ohm. It is commonly used in PCB mount applications, with a vertical actuator orientation and a max operating temperature of 70°C.
RV4NAYSD501A
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Type (Actuator): SCREW;
89PHR100KLF
89PHR100KLF by Tt Electronics Plc is a CERMET variable resistor with 100000 ohm resistance, rated for 0.75 W power dissipation. It features a linear law of resistance and operates b/w -55 to 125 °C temperatures. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
PS60-10MC1BR5K
PS60-10MC1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. It is designed for PCB mounting applications requiring a vertical slide actuator in through-hole mount construction.
23ESA474MMF50AF
TE Connectivity
TE Connectivity's 23ESA474MMF50AF is a linear carbon film potentiometer with 470k ohm resistance, 20% tolerance, and 0.4W power dissipation. It features a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise control applications in various electronic devices.
89PHR5KLF
89PHR5KLF by Tt Electronics Plc is a CERMET variable resistor with 5000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance, through-hole mounting style, and operates at a max voltage of 200 V. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
RUS1K0E
The Ohmite Manufacturing RUS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 1000W power dissipation rating, HORIZONTAL orientation, and SHAFT actuator type. Ideal for PANEL MOUNT applications requiring precise resistance adjustment in a CIRCULAR PACKAGE.
3296W-1-102
Bourns 3296W-1-102 is a 1000 ohm CERMET trimmer resistor with 25 turns and linear resistance law. It has a max operating temperature of 125°C, suitable for applications requiring precise resistance adjustments in electronic circuits. The through-hole mount package style makes it easy to install in various devices.
CMU1511E
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
P16NP222KAB15
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Tolerance: 10 %;
6-1879321-8
POTENTIOMETER; Dimensions: 13.75mm x 11.7mm x 5.1mm; Orientation (Actuator): HORIZONTAL;
533B1103JC
Vishay Intertechnology
Vishay Intertechnology's 533B1103JC is a linear wire wound potentiometer with 10000 ohm resistance, 3 turns, and 5% tolerance. Ideal for panel mount applications, it operates b/w -55 to 125 °C with a rated power dissipation of 1W.
3314J-1-103G
Bourns 3314J-1-103G is a CERMET variable resistor with 10000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3386P-1-103LF
Bourns 3386P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3386P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-203LF
Bourns 3386P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments with a rotation angle of 280°.
3386F-1-103TLF
3386P-1-103TLF
3386P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-102TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386G-1-204LF
Bourns 3386G-1-204LF is a CERMET trimmer resistor with 200k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125°C. Its linear law of resistance and screw actuator make it suitable for precise adjustments in various electronic circuits.
3386R-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-503TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386W-1-501LF
3386F-1-502LF
3386W-1-102LF
3386P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-205LF
Bourns 3386P-1-205LF is a CERMET trimmer resistor with 2000000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved