Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3224G-1-501E is a linear trimmer pot with 500 ohm resistance, 12 turns, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
Median Price
$3.930
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.715
1k+ parts
$2.248
10k+ parts
$1.968
Mouser Electronics
$2.720
$2.110
$2.000
Newark
$4.330
$3.170
$2.840
-
Element14
$5.105
$3.519
$2.704
$2.267
Master Electronics
$1.700
$1.620
Verical
$2.462
Farnell
$2.140
Nova Conductors
$2.201
VNN
Bristol Electronics
Electro Sonic
$1.870
$1.850
M&R Communications
IBS Electronics
$2.384
$2.272
Atlantic Semiconductor
Vyrian
Argo Parts USA
$2.126
Aranea Global
$2.157
$2.070
Authorized Procurement Solutions
Continental Prestige Electronics
$2.780
Having 12 turns allows for precise adjustments and fine-tuning, making this resistor suitable for applications that require high accuracy.
With a rated temperature of 85°C, this resistor can withstand moderate heat levels, making it versatile for various operating environments.
Cermet technology offers excellent stability and reliability, ensuring consistent performance over time.
With a resistance value of 500 ohms, this resistor can handle a moderate amount of current flow, suitable for a wide range of applications.
A tolerance of 10% allows for flexibility in the resistance value, making this resistor suitable for general-purpose use.
With a rated power dissipation of 0.25 watts, this resistor can handle moderate power levels, making it reliable for various electronic circuits.
Being surface mountable, this resistor is easy to install and saves space on PCBs, making it ideal for compact electronic devices.
Variable Resistors 3224G-1-501E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3224G-1-501E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3214, 3224 Series Plastic March/2011 3224 Model Epoxy Color June/2007
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Itt Semiconductor
91ER500KLF
Tt Electronics Plc
91ER500KLF by Tt Electronics Plc is a CERMET variable resistor with 500000 ohm resistance, suitable for PCB mounting. It has a linear law of resistance, operates b/w -55 to 125 °C, and can handle up to 250V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RK27112A00AK
Alps Alpine
Alps Alpine RK27112A00AK is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It has a shaft actuator, through-hole mounting, and PCB package style. Ideal for applications requiring precise voltage or current control in electronic circuits.
RES250E
Ohmite Manufacturing
Ohmite Manufacturing's RES250E is a 250 ohm wire wound potentiometer with linear resistance law. It features a 12.5W power dissipation rating, 300° rotation angle, and panel mount package style. Ideal for applications requiring precise control of resistance in horizontal orientation.
M43P502KB30T601
Vishay Intertechnology
Vishay Intertechnology's M43P502KB30T601 is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.75 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a temperature coefficient of 100 ppm/°C.
3386W-1-102LF
Bourns
Bourns 3386W-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The rectangular package with wire terminals makes it suitable for through-hole mounting.
3266X-1-203LF
Bourns 3266X-1-203LF is a CERMET trimmer resistor with 12 turns, 20000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, -55 to 150 °C temperature range, and matte tin terminal finish.
3006P-1-102LF
Bourns 3006P-1-102LF is a CERMET trimmer pot with 1000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications requiring precise voltage adjustments.
3386P-1-501LF
Bourns 3386P-1-501LF is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
RV4NAYSD502A
Eti Systems
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
53CAD-E12-H15L
Bourns 53CAD-E12-H15L is a linear potentiometer with 10000 ohm resistance, 5% tolerance, and 1W power dissipation. It has a CERMET technology and operates b/w -40 to +125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
37PR500KLF
37PR500KLF by Tt Electronics Plc is a CERMET variable resistor with 500000 ohm resistance, suitable for PCB mounting. It has a linear law of resistance, operates b/w -30 to 100 °C, and can handle up to 250V. Ideal for applications requiring precise voltage adjustments in electronic circuits.
RJS5K0E
The Ohmite Manufacturing RJS5K0E is a 5000 ohm linear wire wound potentiometer with 10% tolerance and 50W power dissipation. It features a circular package, panel mount style, and shaft actuator for precise control in various applications such as industrial machinery and electronic equipment.
P0915N-FC15BR10K
P0915N-FC15BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 300° angle of rotation. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery. The rectangular package with PCB mount style makes it suitable for panel mounting in various electronic devices.
3590S-1-502L
Bourns 3590S-1-502L is a 5000 ohm linear wire wound potentiometer with 10 turns, 5% tolerance, and rated power dissipation of 2W. It has a circular package with panel mount style for applications requiring precise resistance adjustment in electronic circuits. Operating temperature range from -40 to 125 °C makes it suitable for various industrial settings.
89PR10KLF
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
PVZ2R104C04B00
Murata Manufacturing
Murata Manufacturing's PVZ2R104C04B00 is a 100000 ohm linear trimmer resistor with 30% tolerance. It operates at temperatures ranging from -25 to 85 °C and has an angle of rotation of 240°. Ideal for surface mount applications, this rectangular resistor features a screw actuator and GULL WING terminals.
3299Y-1-101LF
Bourns 3299Y-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a max voltage of 300 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
51CAD-E24-B18L
The Bourns 51CAD-E24-B18L is a linear conductive plastic potentiometer with 50000 ohm resistance, suitable for PCB mounting. It has a temperature coefficient of 1000 ppm/°C and operates b/w 1-125 °C. Ideal for applications requiring precise resistance adjustment in compact spaces.
PE30L0FL472KAB
Vishay Intertechnology's PE30L0FL472KAB is a 4700 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 3W, operating voltage of 119.9V, and temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise resistance adjustment in a compact circular package.
3296X-1-104LF
The Bourns 3296X-1-104LF is a multi-turn cermet trimmer resistor with 100k ohm resistance, linear law, and 25 turns. It operates b/w -55°C to 125°C, has a tolerance of 10%, and can handle up to 300V. Ideal for precision circuit adjustments in various electronic applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3224W-1-103E
Bourns 3224W-1-103E is a linear trimmer resistor with 12 turns and 10000 ohm resistance. It operates b/w -65 to 150 °C, suitable for surface mount applications requiring precise resistance adjustments in electronic circuits. The CERMET technology and screw actuator make it ideal for compact designs with a tolerance of 10%.
3224W-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-102E
Bourns 3224W-1-102E is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. It has 12 turns, operates b/w -65 to 150 °C, and offers a temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3224W-1-501E
The Bourns 3224W-1-501E is a 500 ohm linear trimmer resistor with 12 turns and a temperature coefficient of 100 ppm/°C. It has a rated power dissipation of 0.25 W, suitable for surface mount applications in electronic circuits requiring precise resistance adjustments. The resistor operates within a wide temperature range from -65 to 150 °C, making it versatile for various industrial and consumer electronics.
3224W-1-104E
The Bourns 3224W-1-104E is a linear trimmer resistor with 12 turns, 100k ohm resistance, and 10% tolerance. It operates b/w -65°C to 150°C, making it suitable for temperature-sensitive applications. With SMT package style and J bend terminals, it's ideal for surface mounting in various electronic devices.
3224J-1-103E
Bourns 3224J-1-103E is a linear trimmer pot with 12 turns, 10000 ohm resistance, and 10% tolerance. It is used in SMT applications for precise resistance adjustments in electronic circuits.
3224W-1-203E
The Bourns 3224W-1-203E is a linear trimmer resistor with 12 turns and 20000 ohm resistance. It has a temperature coefficient of 100 ppm/°C and can operate b/w -65 to 150 °C. Ideal for surface mount applications requiring precise resistance adjustments in compact spaces.
3224W-1-202E
The Bourns 3224W-1-202E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohm, rated power dissipation of 0.25 W, and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
3224W-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-101E
Bourns 3224W-1-101E is a 100 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates b/w -65 to 150 °C, ideal for surface mount applications requiring precise resistance adjustments in compact spaces. The cermet technology and screw actuator make it suitable for various electronic devices.
3224X-1-502E
Bourns 3224X-1-502E is a CERMET trimmer pot with 12 turns, 5000 ohm resistance, and linear law. Ideal for SMT applications, it has a temperature range of -65 to 150 °C and tolerance of 10%.
3224J-1-503E
3224J-1-502E
Bourns 3224J-1-502E is a linear trimmer pot with 12 turns, 5000 ohm resistance, and 10% tolerance. It is a surface mount variable resistor suitable for applications requiring precise resistance adjustments in compact electronic devices. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 to 150 °C temperatures.
3224W-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-253E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-104E
Bourns 3224J-1-104E is a linear trimmer pot with 12 turns and resistance of 100k ohm. It operates b/w -65 to 150 °C, making it ideal for precise adjustments in electronic circuits. With SMT package style and surface mounting type, it's suitable for compact applications requiring high precision.
3224J-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224G-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-100E
Bourns 3224J-1-100E is a linear trimmer pot with 12 turns, 10 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for precise resistance adjustments in electronic circuits requiring compact SMT components.
3224W-1-504E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved