Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3224W-1-203E is a linear trimmer resistor with 12 turns and 20000 ohm resistance. It has a temperature coefficient of 100 ppm/°C and can operate b/w -65 to 150 °C. Ideal for surface mount applications requiring precise resistance adjustments in compact spaces.
Median Price
$2.147
Lifecycle Status
Suppliers In-Stock
57
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.410
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.580
Bürklin Elektronik
$2.890
$2.060
DigiKey
$3.930
$2.715
Mouser Electronics
$2.720
$2.140
$2.080
Chip1Stop
$4.120
$2.250
$1.730
RS Americas
$4.680
$3.510
$3.040
Element14
$6.240
$3.810
Master Electronics
$2.100
$2.000
Verical
$2.050
TTI
$2.350
Avnet
$1.959
$1.863
TTI Europe
$1.909
Farnell
$2.020
Arrow
$2.099
Greenchips
$1.736
$1.653
$1.574
$1.421
Ozdisan Elektronik
$2.153
Nova Conductors
$2.530
DF Sales Co.
$3.200
Mobius Materials
$3.740
$3.020
Component Electronics Inc.
$4.230
$3.170
$2.750
Chip Stock
Electro Sonic
$1.920
IBS Electronics
$2.626
$2.573
Vyrian
Electronic Expediters
NAC Semi
$2.800
$2.590
Semi Source
ComSIT Distribution GmbH
Prism Electronics
Resion
VNN
Sea View Technologies
Dan-Mar Components
PC Components Company LLC
EMSNET
Connector Distribution Corp
Right Parts Inc.
Odi Ramu Company
Sogenti Electronics
Lighthouse Electronics, Inc.
Atlantic Semiconductor
SIE Connect GmbH - GreenChips
ACDS - Activité Composants Distribution Service
Mil-Aero Solutions, Inc.
Florida Circuit
LIBRA Elektronik GmbH
QIE Inc.
J2 Sourcing AB
North Shore Components
Holdelec - ElecDif-Pro
Sensible Micro Corp
Bristol Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Global Solutions Electronics Company
LWI Electronics Inc
Corohmni
$0.187
Aztec Data Supply Inc.
$0.350
Semicontronic
$1.180
$1.150
$1.145
Argo Parts USA
Bastille Electronics
$2.404
$2.283
$2.252
Allen Electronics Distributors
$4.870
$4.430
$4.190
Neutron USA
$85.900
Perfect Parts
Kepictronics
Abacus Technologies
Eastek
Authorized Procurement Solutions
GreenTree Electronics
Assy Fe
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Continental Prestige Electronics
$2.390
Glotronic Ltd.
Futuretech Components
More turns allow for finer adjustments, providing more precise control over resistance levels.
Suitable for a wide range of temperature environments, ensuring stable performance.
Cermet technology offers high reliability and stability, making the variable resistor durable.
High resistance value allows for fine-tuning and customization in electronic circuits.
Provides acceptable levels of variation in resistance values, making the resistor reliable for practical applications.
Capable of handling up to 0.25 watts of power, suitable for various electronic systems and applications.
Variable Resistors 3224W-1-203E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3224W-1-203E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3214, 3224 Series Plastic March/2011 3224 Model Epoxy Color June/2007
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
93PR20KLF
Tt Electronics Plc
93PR20KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 20000 ohm, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and operates at an angle of rotation up to 270°. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
PTA6043-2215DPB103
Bourns
Bourns PTA6043-2215DPB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a slide actuator, through-hole mounting type, and operates at -10 to 50 °C. Ideal for PCB applications requiring precise voltage control in compact spaces.
3296Y-1-201LF
Bourns 3296Y-1-201LF is a 200 ohm, 25-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.5W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. With through-hole mounting and vertical actuator orientation, it ensures reliable performance in various circuits.
PA16NP102MAB15
Vishay Intertechnology's PA16NP102MAB15 is a 1000 ohm linear potentiometer with 20% tolerance and 0.5 W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 85 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
73JA25K
Honeywell Sensing And Control
73JA25K by Honeywell Sensing And Control is a wire wound potentiometer with 10 turns and linear resistance law. It has a resistance of 25000 ohm, rated power dissipation of 2W, and operates b/w -40 to 120 °C. Ideal for applications requiring precise voltage control in chassis mount setups.
91A1A-B28-A15L
The Bourns 91A1A-B28-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
3329W-1-503LF
Bourns 3329W-1-503LF is a CERMET trimmer resistor with 50000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for adjusting voltage levels with a linear law of resistance. Operating temperature ranges from -55 to 150 °C.
3296W-1-473LF
Bourns 3296W-1-473LF is a linear trimmer resistor with 47000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has 25 turns and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3306W-1-203
Bourns 3306W-1-203 is a linear trimmer resistor with 20000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -25 to 100 °C.
67ZR500KLF
67ZR500KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85-125 °C operating temperature range. It is used in PCB mount applications for adjusting voltage with a tolerance of 10%.
PS60-10MA1BR5K
PS60-10MA1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. Ideal for PCB mounting applications due to its vertical orientation, slide actuator type, and through-hole mounting capability.
P10XXAI101KB30
Vishay Intertechnology's P10XXAI101KB30 is a CERMET POTENTIOMETER with 10% Tolerance, 250° Angle Of Rotation, and 0.5 W Rated Power Dissipation. Ideal for PCB Mount applications in electronics requiring precise resistance adjustments within -55 to 125 °C temperature range.
3299Z-1-503LF
Bourns 3299Z-1-503LF is a CERMET trimmer pot with 50000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125°C and is ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
3224J-1-102E
Bourns 3224J-1-102E is a CERMET trimmer pot with 1000 ohm resistance, linear law, and 12 turns. It operates b/w -65 to 150 °C and has a tolerance of 10%. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
PS6KV50-103A3030I-PM
Amphenol
PS6KV50-103A3030I-PM by Amphenol is a linear carbon variable resistor with 1 turn and a resistance of 10000 ohm. It has a rated temperature of 50 °C and is commonly used in surface mount applications.
PVG5A202C03R00
Murata Manufacturing
PVG5A202C03R00 by Murata is a 2000 ohm linear trimmer resistor with 11 turns, operating voltage of 300V, and rated power dissipation of 0.25W. It has a temperature coefficient of 150 ppm/°C and is suitable for surface mount applications in various electronic circuits requiring precise resistance adjustments.
3006P-1-254LF
The Bourns 3006P-1-254LF is a linear trimmer pot with 15 turns and resistance of 250k ohm. It has a rated power dissipation of 0.75W, operating voltage of 400V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications in various electronic circuits requiring precise resistance adjustments.
91A1A-B28-B10L
The Bourns 91A1A-B28-B10L is a linear conductive plastic potentiometer with 1000 ohm resistance, suitable for panel mount applications. It has an operating temperature range of -40 to 125 °C and a rated power dissipation of 1 W. The potentiometer features a shaft actuator, horizontal orientation, and flat terminal shape, making it ideal for precise control in various electronic devices.
3296W-1-102
Bourns 3296W-1-102 is a 1000 ohm CERMET trimmer resistor with 25 turns and linear resistance law. It has a max operating temperature of 125°C, suitable for applications requiring precise resistance adjustments in electronic circuits. The through-hole mount package style makes it easy to install in various devices.
3296W-1-102RLF
Bourns 3296W-1-102RLF is a CERMET trimmer resistor with 1000 ohm resistance, 25 turns, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features include multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3224W-1-103E
Bourns 3224W-1-103E is a linear trimmer resistor with 12 turns and 10000 ohm resistance. It operates b/w -65 to 150 °C, suitable for surface mount applications requiring precise resistance adjustments in electronic circuits. The CERMET technology and screw actuator make it ideal for compact designs with a tolerance of 10%.
3224W-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-102E
Bourns 3224W-1-102E is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. It has 12 turns, operates b/w -65 to 150 °C, and offers a temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3224W-1-501E
The Bourns 3224W-1-501E is a 500 ohm linear trimmer resistor with 12 turns and a temperature coefficient of 100 ppm/°C. It has a rated power dissipation of 0.25 W, suitable for surface mount applications in electronic circuits requiring precise resistance adjustments. The resistor operates within a wide temperature range from -65 to 150 °C, making it versatile for various industrial and consumer electronics.
3224W-1-104E
The Bourns 3224W-1-104E is a linear trimmer resistor with 12 turns, 100k ohm resistance, and 10% tolerance. It operates b/w -65°C to 150°C, making it suitable for temperature-sensitive applications. With SMT package style and J bend terminals, it's ideal for surface mounting in various electronic devices.
3224J-1-103E
Bourns 3224J-1-103E is a linear trimmer pot with 12 turns, 10000 ohm resistance, and 10% tolerance. It is used in SMT applications for precise resistance adjustments in electronic circuits.
3224W-1-202E
The Bourns 3224W-1-202E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohm, rated power dissipation of 0.25 W, and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
3224W-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-101E
Bourns 3224W-1-101E is a 100 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates b/w -65 to 150 °C, ideal for surface mount applications requiring precise resistance adjustments in compact spaces. The cermet technology and screw actuator make it suitable for various electronic devices.
3224X-1-502E
Bourns 3224X-1-502E is a CERMET trimmer pot with 12 turns, 5000 ohm resistance, and linear law. Ideal for SMT applications, it has a temperature range of -65 to 150 °C and tolerance of 10%.
3224J-1-503E
3224J-1-502E
Bourns 3224J-1-502E is a linear trimmer pot with 12 turns, 5000 ohm resistance, and 10% tolerance. It is a surface mount variable resistor suitable for applications requiring precise resistance adjustments in compact electronic devices. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 to 150 °C temperatures.
3224W-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-253E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-104E
Bourns 3224J-1-104E is a linear trimmer pot with 12 turns and resistance of 100k ohm. It operates b/w -65 to 150 °C, making it ideal for precise adjustments in electronic circuits. With SMT package style and surface mounting type, it's suitable for compact applications requiring high precision.
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224G-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-100E
Bourns 3224J-1-100E is a linear trimmer pot with 12 turns, 10 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for precise resistance adjustments in electronic circuits requiring compact SMT components.
3224W-1-504E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-205G
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved