Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3386P-1-504LF is a CERMET trimmer resistor with 500k ohm resistance, 10% tolerance, and 0.5W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Median Price
$1.107
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Avnet
1+ parts
$0.746
100+ parts
$0.588
1k+ parts
-
10k+ parts
Newark
$0.761
Farnell
$1.260
$0.696
RS Americas
$1.540
$1.230
$1.000
Mouser Electronics
$1.600
$0.960
$0.886
$0.715
DigiKey
$1.830
$1.266
$1.049
$0.919
Element14
$2.250
$1.640
$1.180
TTI
$0.810
TTI Europe
$0.954
$0.694
$0.629
Bürklin Elektronik
$1.420
$1.070
$0.980
Verical
$1.467
$1.365
Chip1Stop
$0.842
Master Electronics
$0.872
$0.764
$0.666
Distrelec
Arrow
$0.718
$0.606
$0.600
Nova Conductors
$0.888
Rapid Electronics
$1.602
$1.081
Bristol Electronics
$1.740
$0.644
$0.452
Vyrian
Chip Stock
Electro Sonic
$0.713
$0.633
VNN
Dan-Mar Components
IBS Electronics
$1.269
$0.913
J2 Sourcing AB
R&J Components
ComSIT Distribution GmbH
ComSIT USA
Amar Radio Corporation
LWI Electronics Inc
Advanced Electronics
$0.020
$0.018
$0.016
Corohmni
$0.148
Aztec Data Supply Inc.
$0.166
Semicontronic
$0.473
$0.461
$0.459
Argo Parts USA
$0.685
$0.664
Bastille Electronics
$0.844
$0.801
$0.790
Continental Prestige Electronics
$1.440
$0.798
$0.642
Allen Electronics Distributors
$1.500
$1.130
Kepictronics
Perfect Parts
Futuretech Components
Robosynatics
$2.000
$1.852
Thin lead diameter allows for easy soldering and installation in tight spaces.
Suitable for a wide range of temperature environments, making it versatile for various applications.
Vertical orientation makes it easy to adjust and control the resistance.
Cermet technology provides stability and high precision in resistance values.
Rectangular shape allows for easy mounting and fitting into circuit designs.
Linear resistance ensures a consistent and predictable change in resistance with adjustment.
High resistance value suitable for precision applications and fine tuning.
PCB mount style makes it convenient for direct integration into circuit boards.
With a maximum operating temperature of 125 °C, it can withstand high heat conditions.
Wide temperature range allows for operation in cold environments as well.
Low temperature coefficient ensures minimal change in resistance with temperature variations.
Matte tin finish provides good conductivity and solderability.
Trimmer resistor type allows for precise adjustment and calibration in circuits.
Tight tolerance of 10% ensures accurate and stable resistance values.
Through-hole mounting offers secure and robust installation in circuit boards.
Rated for 0.5 watts power dissipation, suitable for various power applications.
Wide angle of rotation allows for fine adjustment and setting of resistance values.
Variable Resistors 3386P-1-504LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3386P-1-504LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Cheng-yi Electronic
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
RV4NAYSD502A
Eti Systems
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
93PR500KLF
Tt Electronics Plc
93PR500KLF by Tt Electronics Plc is a 1W TRIMMER resistor with 500000 ohm resistance, 10% tolerance, and 270° rotation angle. It is used in PCB Mount applications for temperature-sensitive circuits due to its linear law of resistance and wide operating temperature range (-55 to 125 °C).
3312J-1-103E
Bourns
Bourns 3312J-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments within -55 to 125 °C temperature range.
RV4NAYSD501A
Ohmite Manufacturing
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Type (Actuator): SCREW;
3299X-1-504LF
The Bourns 3299X-1-504LF is a CERMET trimmer pot with 25 turns, 500000 ohm resistance, and linear law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
RV4LAYSA102A
Clarostat Sensors And Controls
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
3314J-1-102E
Bourns 3314J-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
PT10LV10103A2020
Piher Sensors And Controls Sa
PT10LV10103A2020 by Piher Sensors And Controls Sa is a 10000 ohm linear trimmer resistor with 20% tolerance. It has a rated power dissipation of 0.15 W and operates b/w -25 to 70 °C. Ideal for applications requiring precise resistance adjustments in circuits.
3266W-1-201LF
Bourns 3266W-1-201LF is a CERMET trimmer resistor with 12 turns, 200 ohm resistance, and linear law. It operates b/w -55 to 150 °C and has a tolerance of 10%. Ideal for applications requiring precise resistance adjustments in circuits with up to 300 V operating voltage.
P0915N-FC15BR100K
P0915N-FC15BR100K by Tt Electronics Plc is a linear conductive plastic potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It is used in applications requiring precise control of electrical resistance, such as panel mount PCB assemblies for temperature-sensitive devices.
3203X103P
TE Connectivity's 3203X103P is a CERMET variable resistor with 10000 ohm resistance, 0.25% tolerance, and 210° rotation angle. Ideal for surface mount applications in electronic circuits due to its linear law of resistance and compact rectangular package measuring 3.4mm x 3.4mm x 2mm.
23ESA222MMF50NF
TE Connectivity's 23ESA222MMF50NF is a linear carbon film potentiometer with 2200 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It features a circular package, horizontal actuator orientation, and shaft actuator type. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3059P-1-202LF
Bourns 3059P-1-202LF is a 2000 ohm linear trimmer resistor with 22 turns, CERMET technology, and 10% tolerance. Ideal for PCB mounting applications in temperature-sensitive environments with an operating voltage of 400V and rated power dissipation of 1W.
3361P-1-502GLF
Bourns 3361P-1-502GLF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3296P-1-200LF
Bourns 3296P-1-200LF is a 20 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. It operates b/w -55 to 125 °C and can handle up to 300V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RT100AS4R70KB
Vishay Intertechnology's RT100AS4R70KB is a 4.7 ohm wire wound POTENTIOMETER with 10% tolerance, 100 W power dissipation, and 320°C max operating temp. Ideal for panel mount applications, it offers a wide resistance range and high voltage capability for precise control in various electronic circuits.
67WR500LFTB
67WR500LFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and max operating temperature of 125°C.
P16NP104KAB15
P16NP104KAB15 by Vishay Intertechnology is a 1-turn linear potentiometer with a resistance of 100k ohm. It has a circular package shape and is suitable for panel mount applications.
3386H-1-102LF
Bourns 3386H-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386F-1-102TLF
Bourns 3386F-1-102TLF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with linear resistance law and 280° rotation angle.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3386P-1-103LF
Bourns 3386P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3386P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-203LF
Bourns 3386P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments with a rotation angle of 280°.
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103TLF
3386P-1-103TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386W-1-102LF
3386F-1-104TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-503TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-101LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386V-1-201
3386W-1-104LF
3386W-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386H-1-203LF
The Bourns 3386H-1-203LF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications for adjusting or trimming circuit parameters.
3386P-1-501T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved