Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3386W-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The rectangular package with wire terminals makes it suitable for through-hole mounting.
Median Price
$1.360
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.915
1k+ parts
$0.732
10k+ parts
$0.686
DigiKey
$0.946
$0.784
$0.687
RS (Exports)
$1.390
$1.110
-
Newark
$1.460
$0.973
$0.886
$0.821
RS Americas
$1.630
$1.300
$1.060
Element14
$1.711
$1.257
$0.937
Farnell
$1.868
$1.104
$0.914
Master Electronics
$0.681
$0.617
Verical
$0.590
Chip1Stop
$0.764
$0.702
TTI
$1.000
$0.715
TTI Europe
$1.068
$0.861
$0.730
Arrow
$0.710
Nova Conductors
$0.650
TME
$1.280
$0.920
$0.880
Vyrian
LWI Electronics Inc
IBS Electronics
$0.885
$0.789
VNN
CirComp Electronics, Inc.
Amar Radio Corporation
Electro Sonic
$1.209
$0.887
$0.691
ComSIT Distribution GmbH
Inventory MP
Bristol Electronics
Argo Parts USA
$0.630
Bastille Electronics
$0.618
$0.587
$0.578
Continental Prestige Electronics
$1.380
$0.834
$0.658
Allen Electronics Distributors
$1.490
$1.120
Authorized Procurement Solutions
Perfect Parts
The small diameter of the leads allows for easy and precise installation on a printed circuit board, making it convenient for assembly.
With a rated temperature of 85°C, this variable resistor can operate effectively in a wide range of temperature conditions without any performance issues.
The 1000 ohm resistance value offers a versatile range for adjusting and fine-tuning the electrical characteristics in various applications.
Having 3 terminals allows for more flexibility in circuit connections and adjustments, making this variable resistor suitable for a variety of electronic designs.
The 10% tolerance ensures that the resistance value stays within an acceptable range, providing consistent and reliable performance in different operating conditions.
With a rated power dissipation of 0.5 W, this variable resistor can handle moderate power levels effectively, making it suitable for a wide range of applications.
Variable Resistors 3386W-1-102LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3386W-1-102LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
PTV09A-4015U-B103
Bourns
Bourns PTV09A-4015U-B103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. Ideal for PCB mounting applications in temperature range of -10 to 50 °C, operating at max voltage of 20 V.
RK271111001T
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
RKS10RE
Ohmite Manufacturing
Ohmite Manufacturing's RKS10RE is a 10 ohm wire wound potentiometer with linear resistance law, 3 terminals, and 10% tolerance. It features a panel mount circular package with a 44.45mm length and 79.38mm diameter, suitable for applications requiring precise resistance adjustment in horizontal orientation. With a rated power dissipation of 100W and an actuator shaft for easy adjustment, it is ideal for use in various electronic circuits.
53CAD-E12-H15L
Bourns 53CAD-E12-H15L is a linear potentiometer with 10000 ohm resistance, 5% tolerance, and 1W power dissipation. It has a CERMET technology and operates b/w -40 to +125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
RS45111A900F
Alps Alpine
Alps Alpine RS45111A900F is a linear potentiometer with 10000 ohm resistance, 3 terminals, and 20% tolerance. It has a slide adjust construction, operates at 10V voltage, and dissipates 0.25W power. Ideal for PCB mounting applications in temperature range of -25 to 70 °C.
89PHR500LF
Tt Electronics Plc
89PHR500LF by Tt Electronics Plc is a TRIMMER resistor with 500 ohm resistance, rated for 0.75 W power dissipation and 10% tolerance. It features CERMET technology, LINEAR resistance law, and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
PTV09A-4020U-B103
Bourns PTV09A-4020U-B103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. It is used in PCB mount applications for adjusting voltage levels in electronic circuits. Operating temperature ranges from -10 to 50 °C.
PTA6043-2215DPB103
Bourns PTA6043-2215DPB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a slide actuator, through-hole mounting type, and operates at -10 to 50 °C. Ideal for PCB applications requiring precise voltage control in compact spaces.
RDC503013A
Alps Electric's RDC503013A is a linear potentiometer with 10000 ohm resistance, 30% tolerance, and shaft actuator. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery. The surface mount design with gull wing terminals makes it suitable for various electronic devices.
225WA050
Nte Electronics
The Nte Electronics 225WA050 is a 50 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 225W and operates at a max temperature of 375°C. Ideal for chassis mount applications requiring precise resistance adjustments.
M63X201KB40
Vishay Intertechnology
Vishay Intertechnology's M63X201KB40 is a CERMET TRIMMER resistor with 10% tolerance, rated at 0.5W power dissipation. It operates b/w -55°C to 125°C, offering linear resistance law and 270° rotation angle. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
PTL60-15R0-103B2
Bourns PTL60-15R0-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It features a slide actuator in a rectangular package for PCB mount applications. Operating temperature range from -10 to 55 °C makes it suitable for various electronic devices.
3590P-1-103L
Bourns 3590P-1-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for PCB mount. It has a rated power dissipation of 2W, operates b/w -40°C to +125°C, and offers a tolerance of 5%. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
RS3011114A02
Alps Alpine RS3011114A02 is a linear potentiometer with 20000 ohm resistance, 3 terminals, and 20% tolerance. It has a slide actuator in a rectangular package for vertical orientation. Ideal for applications requiring precise resistance adjustment in temperatures ranging from -25°C to 70°C.
RK09K12C0A19
RK09K12C0A19 by Alps Alpine is a linear potentiometer with 1 turn and a resistance of 10k ohm. It is commonly used in PCB mount applications, with a vertical actuator orientation and a max operating temperature of 70°C.
3683S-1-104L
Bourns 3683S-1-104L is a linear potentiometer with 100k ohm resistance, 3% tolerance, and 2W power dissipation. Ideal for panel mount applications in temperature-sensitive environments due to its -25 to 85 °C operating range and low temp coef of 100 ppm/°C.
3852A-287-103AL
Bourns 3852A-287-103AL is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -1 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a cylindrical package.
72PR10KLF
72PR10KLF by Tt Electronics Plc is a CERMET trimmer pot with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with a linear law of resistance. Operating temperature ranges from -55 to 125 °C, making it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3386P-1-103LF
Bourns 3386P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3386P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-203LF
Bourns 3386P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments with a rotation angle of 280°.
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103TLF
3386P-1-103TLF
3386F-1-102TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-104TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-503TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-101LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386V-1-201
3386W-1-104LF
3386W-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386H-1-203LF
The Bourns 3386H-1-203LF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications for adjusting or trimming circuit parameters.
3386W-1-104
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved