Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3290H-1-103 is a 10000 ohm linear wire wound trimmer resistor with 25 turns and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150 °C, and has an actuator type of screw. Ideal for PCB mount applications requiring precise resistance adjustments in a compact through-hole package.
Median Price
$38.680
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$28.130
1k+ parts
-
10k+ parts
DigiKey
$26.562
$24.629
TTI
$24.550
$23.230
Verical
$27.560
Voyager Components
$22.410
Nova Conductors
$23.725
Electro Sonic
$30.840
$23.990
$22.710
IBS Electronics
$50.855
$31.697
$31.374
Vyrian
VNN
Component Sense
LWI Electronics Inc
J2 Sourcing AB
Electronics Depot
SPM Sales
Mil-Aero Solutions, Inc.
Electronic Expediters
Aztec Data Supply Inc.
$0.220
AZTECH Wire
$0.740
$0.710
$0.700
$0.680
Semicontronic
$21.600
$21.060
$20.952
Decca Corp
$21.168
$20.956
Corohmni
$22.588
Advanced Electronics
$23.266
$22.102
Continental Prestige Electronics
$23.250
Neutron USA
$79.990
Robosynatics
Lucentia Tech
$2.086
Argo Parts USA
Netroflash
$22.539
$22.064
Perfect Parts
Thinner leads allow for easier soldering and integration into circuit boards.
Higher number of turns allows for more precise and fine-tuned adjustment of resistance.
Suitable for a wide range of operating temperatures, making it versatile for various applications.
Wire wound technology ensures high precision and stability in resistance values.
Rectangular construction allows for easy placement and mounting in circuits.
Standard resistance value suitable for many electronic applications.
PCB mount package style makes it easy to integrate into printed circuit boards.
Wide range of operating temperature ensures reliability in different environments.
Low temperature coefficient ensures stable resistance values over temperature changes.
Tight tolerance ensures accuracy in resistance value.
Through hole mounting provides secure and stable placement in circuit boards.
High power dissipation rating allows for handling of higher power loads.
Variable Resistors 3290H-1-103 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3290H-1-103 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Bytesonic Electronics
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
M39029/58360
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Itt Semiconductor
Micro Commercial Components
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
14910F0GJSX10502KA
Vishay Intertechnology's 14910F0GJSX10502KA is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PCB mount applications, it operates b/w -40 to 125 °C with a temperature coefficient of 150 ppm/°C.
89PHR20KLFTB
Tt Electronics Plc
89PHR20KLFTB by Tt Electronics Plc is a CERMET trimmer resistor with 20000 ohm resistance, 20 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage levels with a max operating temperature of 125°C. The resistor features a screw actuator, matte tin terminal finish, and can handle up to 200V operating voltage.
KU1031S28
Precision Electronics
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Technology: CARBON;
D50K250E
Ohmite Manufacturing
The Ohmite D50K250E is a 250 ohm wire wound potentiometer with linear resistance law. It has a rated power of 50W, operating voltage of 1625V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance control in high-temperature environments up to 350 °C.
RRS25RE
Ohmite Manufacturing's RRS25RE is a 25 ohm linear wire wound potentiometer with 10% tolerance. It features a 500W power dissipation, 325° rotation angle, and panel mount package style. Ideal for applications requiring precise resistance adjustments in horizontal orientation.
501-0010
Nte Electronics
Nte Electronics 501-0010 is a 2500 ohm linear carbon potentiometer with 3 terminals. It has a rated power dissipation of 2W, operating voltage of 500V, and can withstand temperatures from -65 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
TC73W-1-504E
Bourns
Bourns TC73W-1-504E is a SMT POTENTIOMETER with 500000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustment in compact spaces due to its small package size and wide angle of rotation up to 260°.
3214W-1-103E
Bourns 3214W-1-103E is a linear trimmer pot with 10000 ohm resistance, rated for 0.25 W power dissipation. It has a max operating temperature of 150°C and is ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
3299Y-1-201
The Bourns 3299Y-1-201 is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a max operating temperature of 125°C.
89PHR100KLF
89PHR100KLF by Tt Electronics Plc is a CERMET variable resistor with 100000 ohm resistance, rated for 0.75 W power dissipation. It features a linear law of resistance and operates b/w -55 to 125 °C temperatures. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
72XWR2KLFTB
72XWR2KLFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and rated power dissipation of 0.5W, it has an operating voltage of 200V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
PT10MV10-104A2020-S
Amphenol
Amphenol's PT10MV10-104A2020-S is a 100k ohm linear carbon potentiometer with 3 terminals. It operates b/w -25°C to 70°C, has a tolerance of 20%, and can handle up to 200V. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
3299X-1-104LF
The Bourns 3299X-1-104LF is a CERMET variable resistor with a resistance of 100k ohm, 25 turns, and a linear law of resistance. It is commonly used in PCB mount applications for adjusting voltage or current levels.
TC73W-1-203E
Bourns TC73W-1-203E is a SMT POTENTIOMETER with 20000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
3250L-1-103M
The Bourns 3250L-1-103M is a 10000 ohm linear wire wound trimmer resistor with 25 turns and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150 °C, and features a screw actuator for precise adjustments. Ideal for applications requiring accurate resistance tuning in electronic circuits.
TC73W-1-202E
Bourns TC73W-1-202E is a SMT POTENTIOMETER with 2000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
P11A2V0FRSY00103MW
Vishay Intertechnology P11A2V0FRSY00103MW is a 10000 ohm POTENTIOMETER with 20% Tolerance and 270° Angle Of Rotation. It operates at -55 to 125 °C, making it suitable for precise voltage control in various electronic applications. The CONDUCTIVE PLASTIC technology and CHASSIS mounting type enhance durability and performance.
PV32P502A01B00
Murata Manufacturing
Murata Manufacturing's PV32P502A01B00 is a 5000 ohm linear trimmer pot with 3 terminals. It has a rated power dissipation of 0.5W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting, this variable resistor is commonly used in applications requiring precise resistance adjustments.
534B1104JC
Vishay Intertechnology's 534B1104JC is a linear wire wound potentiometer with 100k ohm resistance, 10 turns, and 5% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 2W. Ideal for applications requiring precise voltage control in industrial settings.
8-1879321-8
TE Connectivity
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 13.75mm x 11.7mm x 5.1mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3290W-1-103
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-102
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290W-1-502
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-500
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290W-1-500
3290H-1-503
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290P-1-202
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290W-1-102
3290H-1-101M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-102M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-103M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-201M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-202M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-253M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-502M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-100M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-202
3290H-1-100
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-101
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3290H-1-253
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved