Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3590S-4-103L is a wire wound potentiometer with a resistance of 10k ohm, 5% tolerance, and a rated power dissipation of 2W. It is commonly used in panel mount applications where precise resistance adjustment is required.
Median Price
$21.850
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS Americas
1+ parts
$21.520
100+ parts
$15.280
1k+ parts
-
10k+ parts
Mouser Electronics
$14.230
$13.040
DigiKey
$15.023
$13.157
RS (Exports)
$22.290
$17.160
Newark
$22.510
$14.820
$13.410
Element14
$22.677
$15.081
Farnell
$25.237
$14.690
Chip1Stop
$14.000
$13.800
TTI
$13.400
$12.840
Arrow
$13.010
$12.100
Verical
Master Electronics
$12.190
$11.920
Nova Conductors
$12.590
TME
$20.260
Vyrian
VNN
Electro Sonic
$12.760
$12.580
Bristol Electronics
IBS Electronics
$16.157
$15.736
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Corohmni
$0.108
Aztec Data Supply Inc.
$0.293
AZTECH Wire
$0.430
$0.410
$0.400
Semicontronic
$10.550
$10.286
$10.234
Continental Prestige Electronics
$20.900
$11.610
Neutron USA
$101.790
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Wire wound technology provides accurate and stable resistance values, making this variable resistor reliable for various applications.
The cylindrical package shape allows for easy installation and mounting, making it convenient for use in different electronic devices.
With a resistance of 10000 ohms, this variable resistor can be used in circuits requiring specific resistance values.
The high maximum operating temperature of 125 °C ensures the variable resistor can withstand heat in various environments.
A tolerance of 5% indicates that the actual resistance value of the variable resistor is close to the specified resistance, providing accuracy in circuit design.
With a rated power dissipation of 2 watts, this variable resistor can handle high power levels without overheating, ensuring stable performance.
Variable Resistors 3590S-4-103L attributes and parameters. Explore more Variable Resistors devices from Bourns
Construction:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Tolerance:
3590S-4-103L Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
PCN Design/Specification - Multiple Models Varnish Process 18/Jan/2012 PBT Resin Jun/2011
PCN Packaging - Multiple Devices Jul/2015
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Cheng-yi Electronic
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BSS138BK,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Panjit International
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
67WR1KLF
Tt Electronics Plc
67WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns and linear resistance law. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
PV32P502A01B00
Bourns
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3296W-1-503LF
Bourns 3296W-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
3224J-1-502E
Bourns 3224J-1-502E is a linear trimmer pot with 12 turns, 5000 ohm resistance, and 10% tolerance. It is a surface mount variable resistor suitable for applications requiring precise resistance adjustments in compact electronic devices. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 to 150 °C temperatures.
TC73W-1-504E
Bourns TC73W-1-504E is a SMT POTENTIOMETER with 500000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustment in compact spaces due to its small package size and wide angle of rotation up to 260°.
PTL60-15R0-103B2
Bourns PTL60-15R0-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It features a slide actuator in a rectangular package for PCB mount applications. Operating temperature range from -10 to 55 °C makes it suitable for various electronic devices.
23ESA103MLA50N
TE Connectivity
TE Connectivity's 23ESA103MLA50N is a linear carbon film potentiometer with 10000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It features a circular package, horizontal actuator orientation, and shaft actuator type. Ideal for applications requiring precise resistance adjustments in electronic circuits.
PVG5A103C03R00
PVG5A103C03R00 by Murata is a 11-turn linear variable resistor with a resistance of 10000 ohm. It has a rated temperature of 70°C and can operate at voltages up to 300V. This trimmer resistor is commonly used in surface mount applications requiring precise resistance adjustments.
23AR10KLFTR
23AR10KLFTR by Tt Electronics Plc is a 10000 ohm linear cermet variable resistor with 3 terminals, suitable for surface mount applications. It has a rated power dissipation of 0.25 W, operating voltage of 200 V, and temperature coefficient of 100 ppm/°C. Ideal for precision circuit adjustments in electronic devices.
P11S3F0CCRZ10503KA
POTENTIOMETER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
3296X-1-204
The Bourns 3296X-1-204 is a CERMET multi-turn trimmer resistor with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for through-hole mounting in applications requiring precise voltage adjustments.
PTL60-15R1-103B2
Bourns PTL60-15R1-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It has a slide actuator and PCB mount package style for applications in electronic circuits requiring precise resistance adjustments.
3006P-1-203LF
The Bourns 3006P-1-203LF is a CERMET potentiometer with 20000 ohm resistance, 15 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise voltage control.
89PHR5K
89PHR5K by Tt Electronics Plc is a CERMET trimmer pot with 5000 ohm resistance, suitable for PCB mount applications. It features 20 turns, linear resistance law, and operates b/w -55 to 125 °C. Ideal for adjusting voltage in electronic circuits with a rated power dissipation of 0.75 W.
RT025AS4701KB
Vishay Intertechnology's RT025AS4701KB is a 25W wire wound potentiometer with 4700 ohm resistance, suitable for panel mount applications. It has a linear law of resistance, operates b/w -55°C to 320°C, and features a shaft actuator with 300° rotation angle.
RRS250E
Ohmite Manufacturing
Ohmite Manufacturing's RRS250E is a 250 ohm wire wound potentiometer with linear resistance law. It features a 500W power dissipation, 10% tolerance, and 325° rotation angle. Ideal for panel mount applications requiring precise variable resistance control in a circular package.
P16NP104KAB15
P16NP104KAB15 by Vishay Intertechnology is a 1-turn linear potentiometer with a resistance of 100k ohm. It has a circular package shape and is suitable for panel mount applications.
3299Y-1-503
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
89PHR50KLF
89PHR50KLF by Tt Electronics Plc is a TRIMMER variable resistor with a resistance of 50000 ohm and rated power dissipation of 0.75 W. It has a linear law of resistance, operates b/w -55 to 125 °C, and is suitable for PCB mount applications requiring precise resistance adjustments.
3290W-1-103
Bourns 3290W-1-103 is a 10000 ohm trimmer resistor with 25 turns, linear resistance law, and 5% tolerance. It has a rated power dissipation of 1W and operates b/w -65 to 150 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3590S-2-103L
Bourns 3590S-2-103L is a 10-turn linear wire-wound potentiometer with 10000 ohm resistance, suitable for panel mount applications. With a rated power dissipation of 2W and temperature coefficient of 50 ppm/°C, it operates b/w -40 to 125 °C, making it ideal for precise control in various electronic devices.
3590S-2-502L
Bourns 3590S-2-502L is a 5000 ohm potentiometer with linear resistance law, 10 turns, and 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
3590S-2-503L
The Bourns 3590S-2-503L is a 10-turn wire wound potentiometer with a linear resistance law. It has a resistance of 50k ohm and can handle a max power dissipation of 2W. This panel mount resistor is commonly used in applications requiring precise control over electrical currents.
3590S-1-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Length (Package): 18.6 mm;
3590S-1-502L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-201L
POTENTIOMETER; Resistance: 200 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -40 Cel;
3590P-1-103L
Bourns 3590P-1-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for PCB mount. It has a rated power dissipation of 2W, operates b/w -40°C to +125°C, and offers a tolerance of 5%. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3590S-1-102L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Shape (Package): CYLINDRICAL PACKAGE;
3590S-2-102L
3590S-2-104L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-4-502L
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): Panel Mount;
3590S-6-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): Panel Mount;
3590S-1-103L
The Bourns 3590S-1-103L is a 10-turn wire wound potentiometer with a linear resistance law, rated at 10000 ohm and 2W power dissipation. It has a circular package with panel mount style, suitable for applications requiring precise resistance adjustment in electronic circuits.
3590S-1-202L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-202L
The Bourns 3590S-2-202L is a 10-turn linear wire wound potentiometer with a resistance of 2000 ohm. It has a rated power dissipation of 2W, operates b/w -40 to 125 °C, and offers precise control in applications requiring accurate resistance adjustments.
3590S-2-252L
POTENTIOMETER; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
3590P-2-203L
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-1-104L
3590S-4-103
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Temperature Coef (ppm/Cel): 50;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved