Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3590S-1-103L is a 10-turn wire wound potentiometer with a linear resistance law, rated at 10000 ohm and 2W power dissipation. It has a circular package with panel mount style, suitable for applications requiring precise resistance adjustment in electronic circuits.
Median Price
$17.870
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Farnell
1+ parts
$13.980
100+ parts
$10.590
1k+ parts
-
10k+ parts
Bürklin Elektronik
$16.030
$13.140
$11.930
Newark
$17.600
$12.040
$10.610
DigiKey
$18.140
$12.481
$10.931
Mouser Electronics
$11.950
TTI
$10.680
$10.380
RS Americas
$18.320
$13.010
RS (Exports)
$18.500
$14.250
Distrelec
$19.889
$11.170
Element14
$23.490
$17.790
TTI Europe
$11.759
$10.789
Chip1Stop
$10.400
Arrow
$11.349
$9.942
Verical
Master Electronics
$10.010
$9.470
Nova Conductors
$9.362
TME
$15.980
$12.670
Vyrian
VNN
IBS Electronics
Micros
$11.133
Corohmni
$0.355
Aztec Data Supply Inc.
$0.448
Continental Prestige Electronics
$9.174
Netroflash
Neutron USA
$108.600
Argo Parts USA
Perfect Parts
Kepictronics
Having 10 turns allows for precise control and adjustment, making this variable resistor suitable for applications requiring fine tuning.
With a rated temperature of 40°C, this variable resistor can operate efficiently in a wide range of environments, increasing its reliability.
The horizontal orientation of the actuator provides easy access for adjustment and monitoring, enhancing user convenience.
The wire wound technology used in this variable resistor ensures high durability and accuracy in resistance values, making it a reliable choice.
The circular package design allows for space-efficient mounting and easy integration into various electronic circuits.
The linear resistance characteristics of this variable resistor offer a consistent response to adjustments, ideal for applications requiring uniform control.
The round construction ensures a compact and sturdy build, suitable for demanding industrial environments.
With a resistance value of 10000 ohms, this variable resistor can be used in a wide range of circuit designs and applications.
The three terminals provide flexibility in circuit connections and allow for various configuration options, increasing design versatility.
The panel mount package style enables secure and stable installation, making this variable resistor suitable for fixed applications.
The lug terminal shape facilitates easy and secure wiring connections, ensuring reliable performance in demanding conditions.
With a high maximum operating temperature of 125°C, this variable resistor can withstand elevated heat levels without compromising performance.
The low minimum operating temperature of -40°C allows for reliable operation in cold environments, making this variable resistor versatile.
The temperature coefficient of 50 ppm/°C ensures minimal drift in resistance values due to temperature changes, enhancing stability.
The tin terminal finish provides excellent conductivity and corrosion resistance, prolonging the lifespan of this variable resistor.
As a potentiometer type resistor, this product offers variable and precise resistance adjustment capabilities, suitable for various applications.
The shaft actuator type allows for smooth and accurate adjustments, making this variable resistor user-friendly and easy to operate.
With a tolerance of 5%, this variable resistor offers consistent and reliable resistance values, ensuring accurate performance in electronic circuits.
The compact length of 18.6mm makes this variable resistor suitable for space-constrained applications without compromising functionality.
The panel mounting type provides secure installation and easy access for adjustments, making this variable resistor a convenient choice.
With a rated power dissipation of 2W, this variable resistor can handle high power loads, making it suitable for demanding applications.
The diameter of 22.22mm ensures a compact form factor, allowing for easy integration into electronic circuits with limited space.
The 3600° angle of rotation provides ample range for adjustments, offering precise control over resistance values in various applications.
Variable Resistors 3590S-1-103L attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3590S-1-103L Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
PCN Design/Specification - Multiple Models Varnish Process 18/Jan/2012 PBT Resin Jun/2011
PCN Packaging - Multiple Devices Jul/2015
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Kingwell Technonlogy
Daco Semiconductor
Meritek Electronics
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
3223W-1-502E
Bourns
Bourns 3223W-1-502E is a linear trimmer resistor with 11 turns and 5000 ohm resistance. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a power dissipation of 0.125 W and voltage rating of 200 V, it is ideal for surface mount designs needing high precision.
23ESB473MMF50NF
TE Connectivity
TE Connectivity's 23ESB473MMF50NF is a 47000 ohm logarithmic potentiometer with a circular package. Featuring carbon film technology, it has a tolerance of 20% and rated power dissipation of 0.4 W. Ideal for applications requiring precise resistance adjustments in horizontal orientation.
3683S-1-102L
The Bourns 3683S-1-102L is a linear variable resistor with a resistance of 1000 ohm and a tolerance of 3%. It is commonly used in panel mount applications where a push button actuator is required.
3386P-1-501LF
Bourns 3386P-1-501LF is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
PVZ2A104A01R00
Murata Manufacturing
Murata Manufacturing's PVZ2A104A01R00 is a linear trimmer resistor with 100k ohm resistance, 30% tolerance, and 0.1W power dissipation. It features a vertical actuator orientation, rectangular package shape, and gold terminal finish. Ideal for surface mount applications in electronics for precise resistance adjustments.
RV4NAYSD102A
Eti Systems
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3329H-1-102LF
Bourns 3329H-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits due to its linear law of resistance and wide operating temperature range (-55 to 150 °C).
PTA6044-2015DPB103
Bourns PTA6044-2015DPB103 is a 10000 ohm linear potentiometer with 6 terminals, rated at 0.125 W power dissipation. It has a vertical actuator and slide type, suitable for PCB mounting applications. Operating voltage of 200 V, temperature range from -10 to 50 °C.
RES2K5E
Ohmite Manufacturing
The Ohmite Manufacturing RES2K5E is a 2500 ohm linear wire wound potentiometer with 3 terminals. It has a 10% tolerance, 12.5W power dissipation, and 300° rotation angle. Ideal for panel mount applications requiring precise resistance adjustments in circuits.
3296W-1-103ALF
Bourns 3296W-1-103ALF is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3299X-1-201LF
Bourns 3299X-1-201LF is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
PVG5A103C03R00
PVG5A103C03R00 by Murata is a 11-turn linear variable resistor with a resistance of 10000 ohm. It has a rated temperature of 70°C and can operate at voltages up to 300V. This trimmer resistor is commonly used in surface mount applications requiring precise resistance adjustments.
T93YA102KT20
Vishay Sfernice
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 10 %;
TC73W-1-203E
Bourns TC73W-1-203E is a SMT POTENTIOMETER with 20000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
3306W-1-105
Bourns 3306W-1-105 is a linear trimmer resistor with 1000000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -25 to 100 °C.
3296W-1-471LF
TRIMMER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
PS30-10MC1BR10K
PS30-10MC1BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. It features a slide actuator, vertical orientation, and PCB mount package style. Ideal for applications requiring precise voltage control in compact spaces.
3299X-1-204LF
Bourns 3299X-1-204LF is a CERMET trimmer pot with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for PCB mounting applications requiring precise resistance adjustments.
3266W-1-503LF
Bourns 3266W-1-503LF is a CERMET trimmer resistor with 12 turns, 50k ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
RS20H11AA019
Alps Alpine
Alps Alpine RS20H11AA019 is a linear potentiometer with 50000 ohm resistance, 20% tolerance, and 0.05 W power dissipation. It has a slide actuator, through-hole mounting type, and operates at -25 to 70 °C. Ideal for PCB mount applications requiring compact rectangular package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3590S-2-103L
Bourns 3590S-2-103L is a 10-turn linear wire-wound potentiometer with 10000 ohm resistance, suitable for panel mount applications. With a rated power dissipation of 2W and temperature coefficient of 50 ppm/°C, it operates b/w -40 to 125 °C, making it ideal for precise control in various electronic devices.
3590S-2-502L
Bourns 3590S-2-502L is a 5000 ohm potentiometer with linear resistance law, 10 turns, and 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
3590S-2-503L
The Bourns 3590S-2-503L is a 10-turn wire wound potentiometer with a linear resistance law. It has a resistance of 50k ohm and can handle a max power dissipation of 2W. This panel mount resistor is commonly used in applications requiring precise control over electrical currents.
3590S-1-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Length (Package): 18.6 mm;
3590S-1-502L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-201L
POTENTIOMETER; Resistance: 200 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -40 Cel;
3590S-4-103L
The Bourns 3590S-4-103L is a wire wound potentiometer with a resistance of 10k ohm, 5% tolerance, and a rated power dissipation of 2W. It is commonly used in panel mount applications where precise resistance adjustment is required.
3590P-1-103L
Bourns 3590P-1-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for PCB mount. It has a rated power dissipation of 2W, operates b/w -40°C to +125°C, and offers a tolerance of 5%. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3590S-1-102L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Shape (Package): CYLINDRICAL PACKAGE;
3590S-2-102L
3590S-2-104L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-4-502L
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): Panel Mount;
3590S-6-501L
POTENTIOMETER; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): Panel Mount;
3590S-1-202L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-2-202L
The Bourns 3590S-2-202L is a 10-turn linear wire wound potentiometer with a resistance of 2000 ohm. It has a rated power dissipation of 2W, operates b/w -40 to 125 °C, and offers precise control in applications requiring accurate resistance adjustments.
3590S-2-252L
POTENTIOMETER; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
3590P-2-203L
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
3590S-1-104L
3590S-1-104
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved