Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: WDIP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Q Components
MRC Electronics
Extreme Components
Sinequanon
Electronics Depot
Prism Electronics
MISTER SPROCKETS
Mentor Electronics Marketing, LLC
Andel Nordic
Supply Digital
Corphita
EPROM AT27C010-12DC attributes and parameters. Explore more EPROM devices from Atmel
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
AT27C010-12DC Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
Atmel Corporation was a creator and manufacturer of semiconductors before being subsumed by Microchip Technology in 2016. Atmel was founded in 1984. The company focused on embedded systems built around microcontrollers
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Meritek Electronics
DS18B20+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
DS18B20U
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Thinking Electronic Industrial
SMJ27C010-17JM
SMJ27C010-17JM by Texas Instruments is a 128KX8 EPROM with 3-STATE output, operating at -55 to 125 °C. It has a supply voltage of 4.5-5.5V and max access time of 170ns. Ideal for military-grade applications requiring reliable non-volatile memory storage in harsh environments.
TMS27C010A-12JE
TMS27C010A-12JE by Texas Instruments is a 128KX8 EPROM with 120 ns access time, 5V supply voltage, and 32 terminals. It is used in industrial applications for storing data in parallel format with a memory density of 1048576 bit.
TMS27C010A-15JE
TMS27C010A-15JE by Texas Instruments is a 128KX8 EPROM with 150 ns access time, operating at -40 to 85 °C. It has 32 terminals, uses CMOS technology, and supports asynchronous mode. Commonly used in industrial applications for storing data securely due to its 1048576 bit memory density and 3-STATE output characteristics.
NMC27C64Q250
National Semiconductor
NMC27C64Q250 by National Semiconductor is an EPROM with 8KX8 organization, 8192 words, and 65536 bit memory density. It operates in asynchronous mode with a programming voltage of 13V. Commonly used for memory storage applications due to its 3-STATE output characteristics and parallel terminal form.
TMS2732A-17JL
TMS2732A-17JL by Texas Instruments is a 4KX8 EPROM with 3-STATE output, operating at 5V. It has a max access time of 170ns and uses NMOS technology. Suitable for commercial applications requiring fast memory access in parallel configuration.
TMS27C040-150JL4
TMS27C040-150JL4 by Texas Instruments is a 512KX8 EPROM with 150 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and IN-LINE package style. Ideal for applications requiring fast memory access in commercial temperature environments.
TMS27C128-2JL
TMS27C128-2JL by Texas Instruments is a 16KX8 EPROM with 200ns access time, 5V supply voltage, and 3-state output. It is used in commercial applications for storing data securely due to its UVPROM technology and through-hole terminal form.
EPC1PI8
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
D2764A
Rochester Electronics
D2764A EPROM by Rochester Electronics features 8KX8 organization, 65536 bit memory density, and 250 ns max access time. It is commonly used in applications requiring a 5V nominal voltage, such as commercial-grade MOS technology systems with a need for 3-STATE output characteristics.
TMS87C257JL
TMS87C257JL by Texas Instruments is a 32KX8 EPROM with 3-STATE output, operating at temperatures from 0 to 70 °C. It has a memory density of 262144 bit and requires a nominal voltage of 5V. Commonly used in commercial applications due to its CMOS technology and through-hole terminal form.
M27C1001-15XF3
STMicroelectronics
M27C1001-15XF3 EPROM by STMicroelectronics features 128KX8 organization, 150 ns access time, and 1048576 bit memory density. Ideal for automotive applications with a temperature range of -40 to 125 °C, it operates at a supply voltage of 5V in parallel mode.
M27C256B-15F6
M27C256B-15F6 by STMicroelectronics is a 32KX8 EPROM with 150 ns access time, operating at 5V. It features a CMOS technology, asynchronous mode, and 3-STATE output. Commonly used in industrial applications for memory storage due to its 262144-bit density and parallel interface.
EPC2TI32N
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE; Power Supplies (V): 3.3/5;
TMS27C040-120JL4
TMS27C040-120JL4 by Texas Instruments is a 512KX8 EPROM with 3-STATE output, operating at 5V. It has a max access time of 120ns and memory density of 4194304 bit. Commonly used in commercial applications requiring fast parallel memory access.
M27C1001-20XF1X
STMicroelectronics M27C1001-20XF1X is a 128Kx8 EPROM with 120ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and common I/O type. Ideal for commercial applications requiring reliable non-volatile memory storage in a rectangular ceramic package.
8510202YA
Intel
UVPROM; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Input/Output Type: COMMON;
M27C4002-45XF1
M27C4002-45XF1 EPROM by STMicroelectronics features 256KX16 organization, 45 ns access time, and 5V nominal voltage. Ideal for applications requiring fast and reliable non-volatile memory storage in commercial temperature environments.
TMS2532-30JDL
TMS2532-30JDL by Texas Instruments is a 4KX8 EPROM with 3-STATE output, operating b/w 0°C to 70°C. Featuring a memory density of 32768 bits and max access time of 300 ns, it is ideal for commercial applications requiring fast data retrieval in a compact IN-LINE package.
MD27C6420
The Intel MD27C6420 is an 8KX8 EPROM with 65536-bit memory density. It operates at a voltage range of 4.5V to 5.5V, featuring a max access time of 200ns and a standby current of 0.00014A. Ideal for military-grade applications requiring reliable non-volatile memory storage in harsh environments.
5962-8606304XX
Texas Instruments' 5962-8606304XX EPROM operates asynchronously with a 32KX8 organization and 3-STATE output. It has a max operating temperature of 125°C, suitable for military-grade applications requiring a memory density of 262144 bit. With a programming voltage of 12.5V and common I/O type, it offers fast access time of 170 ns in parallel mode.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Atmel
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved