Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC812LC4 by Analog Devices is a RF/Microwave Attenuator with 30 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 4 dB Max Insertion Loss. Constructed with GAAS technology, it's a Variable Attenuator suitable for applications requiring precise signal control in the frequency range of 5-30 GHz.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$1.669
$1.552
IDEA Electronic Components Group
$1.795
$1.705
DigiPath Technology Company
$2.800
$2.688
AZTECH Wire
$5.440
$5.220
$5.120
$5.020
Ampacity Inc.
$30.000
Semicontronic
$37.000
$36.075
$35.890
One Stop Electronics
$40.000
Component Stockers USA
$99.990
Perfect Parts
Corphita
Ceramic material ensures high durability and reliability, making this attenuator suitable for long-term use in various applications.
With a high maximum input power capacity, this attenuator can handle strong signals without distortion or damage, ensuring accurate signal attenuation.
Provides a consistent and precise level of signal attenuation, allowing for reliable signal control and adjustment in RF or microwave systems.
Coaxial construction offers low insertion loss and excellent signal integrity, making this attenuator suitable for high-frequency applications with minimal signal degradation.
Multiple terminals allow for flexible connection options and compatibility with various systems, enhancing the versatility of this attenuator.
Can withstand high temperatures without performance degradation, ensuring reliable operation in demanding environments.
Suitable for use in extreme cold environments without impacting performance, providing versatility across a wide temperature range.
Gold over nickel terminals offer excellent conductivity and corrosion resistance, ensuring long-lasting performance and signal integrity.
With low insertion loss, this attenuator minimizes signal attenuation and maintains signal quality, making it ideal for high-performance RF or microwave systems.
Utilizes Gallium Arsenide technology for efficient signal control and attenuation, ensuring high performance and reliability in RF or microwave applications.
Variable attenuator allows for adjustable signal attenuation levels, providing flexibility in signal control and adjustment in RF or microwave systems.
Matches the impedance of standard RF systems, ensuring efficient signal transmission and minimizing signal reflections for optimal performance.
Supports operation at high frequencies, making it suitable for a wide range of RF or microwave applications requiring precise signal attenuation.
Surface mount design allows for easy installation and space-saving integration into RF or microwave systems, providing convenience and flexibility in setup.
Supports operation at high frequencies, making it ideal for various RF or microwave applications requiring signal attenuation within this frequency range.
RF/Microwave Attenuators HMC812LC4 attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC812LC4 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LCAT1001-04
L-com
FIXED ATTENUATOR;
19-9-1
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; Additional Features: SMP-M, I/P POWER-MAX(PEAK)=250W; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm;
ADRF5473BCZ
Analog Devices
VARIABLE ATTENUATOR;
5419
Smiths Group Plc
FIXED ATTENUATOR; Construction: MODULE; Minimum Operating Temperature: -55 Cel; Terminal Finish: Nickel (Ni); Maximum Operating Temperature: 150 Cel; Characteristic Impedance: 50 ohm;
66-10-14
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.9;
HMC802LP3E
HMC802LP3E by Analog Devices is a GAAS technology RF attenuator with 20 dB attenuation and 4.5 dB insertion loss. It operates from 0 to 10000 MHz, handles up to 30 dBm CW power, and has a matte tin finish. Ideal for RF/microwave applications requiring precise signal control in a compact surface-mount package.
2-5
Cobham Plc
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Nominal Attenuation: 5 dB; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz;
HMC1019LP4E
Analog Devices' HMC1019LP4E is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in RF/microwave applications up to 30 GHz.
84-5
The Aeroflex/weinschel 84-5 is a COAXIAL fixed attenuator with 5 dB nominal attenuation, handling up to 33.01 dBm CW power. It operates from -55°C to 125°C, with VSWR of 1.5 and frequency range of 0-40000 MHz. Ideal for RF/Microwave applications requiring precise signal control.
RFSA2113SR
Qorvo
The Qorvo RFSA2113SR is a 30 dB variable attenuator with max input power of 23 dBm. It operates from 50 MHz to 18 GHz, with insertion loss of 4.5 dB and characteristic impedance of 50 ohm. Ideal for RF/microwave applications requiring precise signal attenuation in components with surface mount package body material.
TGL6425-SCC
TGL6425-SCC by Texas Instruments is a GAAS technology RF attenuator with 19.7 dB attenuation, 30 dBm CW input power, and 1.4 max VSWR. Ideal for applications requiring variable attenuation in the frequency range of 500 MHz to 18 GHz.
19-9-2
Api Technologies
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz;
32-10
Cobham Plc's 32-10 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.35, and nominal attenuation of 10 dB. It is a coaxial fixed attenuator with a characteristic impedance of 50 ohm, operating frequency range from 0 MHz to 18000 MHz, and can withstand temperatures from -55°C to 125°C.
FIXED ATTENUATOR; Terminal Finish: Gold (Au); JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Temperature: -55 Cel;
G40
M/a-com
RF/Microwave Attenuators; No. of Terminals: 4; Package Body Material: METAL; Minimum Operating Temperature: -54 Cel; Package Equivalence Code: CAN4,.3; Maximum Operating Temperature: 85 Cel;
44
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Input Power (CW): 36.99 dBm;
HMC-VVD106
Analog Devices' HMC-VVD106 is a 21 dB RF variable attenuator with max insertion loss of 2 dB. Operating from -55°C to 85°C, it covers frequencies from 36 GHz to 50 GHz. Ideal for RF/microwave applications requiring precise signal attenuation in a compact COMPONENT form factor.
44-9
FIXED ATTENUATOR; JESD-609 Code: e4; Terminal Finish: Gold (Au); Maximum Voltage Standing Wave Ratio: 1.25; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz;
R411.820.124
Radiall S A
Radiall S A's R411.820.124 is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3, ideal for RF applications up to 6 GHz. Constructed coaxially, it operates b/w -40°C to 85°C, offering a characteristic impedance of 50 ohms for precise signal attenuation in various setups.
87-5
FIXED ATTENUATOR; Maximum Operating Temperature: 100 Cel; Terminal Finish: Gold (Au); Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 33.01 dBm; Additional Features: 2.92 MM-F; 2.92 MM-M, I/P POWER-MAX(PEAK)=500W;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
HMC802ALP3E
HMC802ALP3E by Analog Devices is a RF/Microwave Attenuator with a max input power of 29.3 dBm and nominal attenuation of 20 dB. It operates at frequencies up to 10 GHz and is commonly used in applications requiring fixed attenuation, such as wireless communication systems.
HMC800LP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC800LP3ETR
HMC801LP3E
VARIABLE ATTENUATOR; Terminal Finish: Matte Tin (Sn); Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15 dB; Maximum Operating Frequency: 10000 MHz;
HMC801LP3ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC802LP3ETR
HMC8073LP3DE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 3000 MHz; Additional Features: CMOS COMPATIBLE;
HMC8073LP3DETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Frequency: 600 MHz;
HMC812ALC4
Analog Devices' HMC812ALC4 is a RF/Microwave Attenuator with 35 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 50 ohm Characteristic Impedance. This GAAS technology-based variable attenuator operates b/w 5-30 GHz, ideal for applications requiring precise signal attenuation in high-frequency circuits.
HMC812LC4RTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC812LC4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC8801
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Input Power (CW): 18 dBm; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 27 dB; Minimum Operating Frequency: 0 MHz;
HMC8802
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 9; Screening Level: 38535V;38534K;883S; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: -40 Cel;
HMC812LC4
Hittite Microwave
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Construction: COAXIAL; Maximum Insertion Loss: 4 dB; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 5000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved