Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC8073LP3DE by Analog Devices is a RF attenuator with 31.5 dB attenuation and 2.2 dB insertion loss, suitable for frequencies b/w 600 MHz to 3000 MHz. It operates at temperatures from -40°C to 85°C, has a max input power of 30 dBm, and requires a 5V power supply. Ideal for applications requiring precise signal control in RF/microwave systems.
Median Price
$8.500
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$4.169
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$7.520
$4.980
DigiKey
$6.444
$5.680
Mouser Electronics
$5.760
$5.220
Analog Devices Inc
$8.580
$6.507
$5.735
Newark
$6.500
$5.570
Farnell
$8.820
$5.650
$5.280
Element14
$12.250
$9.270
$8.490
Richardson RFPD
$4.840
Arrow
$4.821
$4.002
$3.892
Digiode
$4.512
Vyrian
Nova Conductors
Sensible Micro Corp
Parana Technologies
$1.238
$1.151
IDEA Electronic Components Group
$1.331
$1.264
DigiPath Technology Company
$2.076
$1.993
Semicontronic
$3.850
$3.754
$3.734
Ampacity Inc.
Corphita
$4.275
Continental Prestige Electronics
$6.520
$4.890
$3.660
Lixinc
Authorized Procurement Solutions
Alle Elektronik GmbH
Aranea Global
The plastic/epoxy material used in the package body provides durability and protection for the internal components, ensuring a longer lifespan for the attenuator.
With a maximum input power of 30 dBm, this attenuator can handle high power levels, making it suitable for a variety of RF and microwave applications.
The nominal attenuation of 31.5 dB allows for precise control over the signal strength, making it ideal for applications that require adjustable attenuation levels.
Operating on a standard power supply of 5V, this attenuator is easy to integrate into existing systems without the need for additional power sources.
With a maximum operating temperature of 85°C, this attenuator can withstand high temperature environments, ensuring reliable performance in various conditions.
The attenuator can operate at temperatures as low as -40°C, making it suitable for use in both high and low temperature environments.
With a low maximum insertion loss of 2.2 dB, this attenuator minimizes signal degradation, ensuring high signal integrity and accuracy.
Being a variable attenuator, this product offers adjustable attenuation levels, providing flexibility and control over signal strength in RF and microwave systems.
With a characteristic impedance of 50 ohm, this attenuator is compatible with standard RF and microwave systems, ensuring seamless integration and optimal performance.
Operating at a minimum frequency of 600 MHz, this attenuator is suitable for a wide range of RF and microwave applications, including high-frequency systems.
The surface mount design of this attenuator allows for easy and hassle-free installation on PCBs or other surfaces, simplifying the integration process.
Operating at a maximum frequency of 3000 MHz, this attenuator is capable of handling high-frequency signals, making it suitable for a range of RF and microwave applications.
RF/Microwave Attenuators HMC8073LP3DE attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Terminal Finish:
HMC8073LP3DE RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - ADRF5x/HMCx 19/Apr/2022
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Onsemi
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Rochester Electronics
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 18000 MHz;
1-30
Api Technologies
FIXED ATTENUATOR; Construction: COAXIAL; Characteristic Impedance: 50 ohm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 12400 MHz; Maximum Operating Temperature: 125 Cel;
TVA0500N09W3S
Emc Technology & Florida Rf Labs
TVA0500N09W3S by Emc Technology & Florida Rf Labs is a fixed attenuator with a max input power of 33.01 dBm and a max VSWR of 1.3. It operates in the frequency range of 0-6000 MHz and is commonly used in RF/Microwave applications for signal attenuation.
45-3-43
Cobham Plc
45-3-43 by Cobham Plc is a RF/Microwave Attenuator with 3 dB Nominal Attenuation, 56.99 dBm Max Input Power (CW), and 1.1 Max VSWR. It is a COAXIAL device with GOLD terminal finish, operating from -55°C to 125°C, suitable for applications requiring fixed attenuation in the frequency range of 0-1500 MHz.
82-40-14
FIXED ATTENUATOR; Construction: COAXIAL; Additional Features: 7/16-F; N-M, I/P POWER-MAX(PEAK)=10000W; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel;
32-8
Cobham Plc's 32-8 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.35, and nominal attenuation of 8 dB. It is a coaxial fixed attenuator with a characteristic impedance of 50 ohm, operating frequency range from 0 MHz to 18000 MHz, and can withstand temperatures from -55°C to 125°C.
5419
FIXED ATTENUATOR; Maximum Operating Temperature: 150 Cel; Nominal Attenuation: 19 dB; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz;
66-10-34
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Temperature: 100 Cel; Terminal Finish: Gold (Au); Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz;
R417506130
Radiall S A
R417506130 by Radiall S A is a COAXIAL FIXED ATTENUATOR with 6 dB Nominal Attenuation, 44.77 dBm Max Input Power (CW), and 1.35 Max VSWR. It operates in the frequency range of 0-4000 MHz, making it ideal for RF/Microwave applications requiring precise signal attenuation and impedance matching in temperatures ranging from -55 to 125°C.
90-30-22
Aeroflex/inmet
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 46.99 dBm;
268-30-33-LIM
268-30-33-LIM by Api Technologies is a COAXIAL fixed attenuator with 30 dB nominal attenuation, 50 dBm CW input power, and 1.2 max VSWR. Ideal for RF/Microwave applications, it operates from -55°C to 100°C, has a characteristic impedance of 50 ohm, and supports frequencies from 0 MHz to 6 GHz.
LCAT1002-07
L-com
FIXED ATTENUATOR;
84-8
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e4; Maximum Operating Frequency: 40000 MHz; Maximum Voltage Standing Wave Ratio: 1.5;
HMC603QS16ETR
Analog Devices
VARIABLE ATTENUATOR; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
AT65-0233
TE Connectivity
TE Connectivity's AT65-0233 is a GAAS RF attenuator with 16 terminals, operating at -40 to 85°C. It has a plastic/epoxy body and requires 5V power supply. Ideal for surface mount applications, it draws a max current of 0.4mA.
LCAT1001-05
284-6-21
284-6-21 by Cobham Plc is a fixed attenuator with 6 dB nominal attenuation, suitable for RF/Microwave applications. With a max input power of 46.99 dBm and VSWR of 1.3, it operates in temperatures from -55 to 100 °C, covering frequencies from 0 to 10 GHz. Ideal for panel mounting due to its coaxial construction and impedance of 50 ohms.
4797
Lockheed Martin Microwave
Lockheed Martin Microwave's 4797 is a RF/Microwave Attenuator with max input power of 40 dBm, VSWR of 1.3, and max operating temp of 105°C. It is a variable attenuator module designed for frequencies ranging from 12.4 GHz to 18 GHz, offering low insertion loss for precise signal control in various applications.
34-20-12
Cobham Plc's 34-20-12 is a RF/Microwave Attenuator with 20 dB Nominal Attenuation, 1.2 Max VSWR, and 43.98 dBm Max Input Power (CW). Ideal for applications requiring fixed attenuation in the frequency range of 0-4000 MHz, with a temperature range of -55 to 125°C. Features gold terminal finish and panel mount construction for reliable performance.
56-06
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Operating Frequency: 28000 MHz; Terminal Finish: GOLD; Maximum Voltage Standing Wave Ratio: 1.25; Additional Features: 3.5 MM, I/P POWER-MAX(PEAK)=500W;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
HMC802ALP3E
HMC802ALP3E by Analog Devices is a RF/Microwave Attenuator with a max input power of 29.3 dBm and nominal attenuation of 20 dB. It operates at frequencies up to 10 GHz and is commonly used in applications requiring fixed attenuation, such as wireless communication systems.
HMC800LP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC800LP3ETR
HMC801LP3E
VARIABLE ATTENUATOR; Terminal Finish: Matte Tin (Sn); Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15 dB; Maximum Operating Frequency: 10000 MHz;
HMC801LP3ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC802LP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC802LP3ETR
HMC8073LP3DETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Frequency: 600 MHz;
HMC812ALC4
Analog Devices' HMC812ALC4 is a RF/Microwave Attenuator with 35 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 50 ohm Characteristic Impedance. This GAAS technology-based variable attenuator operates b/w 5-30 GHz, ideal for applications requiring precise signal attenuation in high-frequency circuits.
HMC812LC4
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; JESD-609 Code: e4;
HMC812LC4RTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC812LC4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC8801
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Input Power (CW): 18 dBm; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 27 dB; Minimum Operating Frequency: 0 MHz;
HMC8802
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 9; Screening Level: 38535V;38534K;883S; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: -40 Cel;
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 30 dBm;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved