Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Hittite Microwave's HMC624LP4ETR is a 50 ohm RF attenuator with 31.5 dB nominal attenuation and 3.8 dB max insertion loss, suitable for frequencies ranging from 0-6000 MHz. It can handle up to 27.99 dBm CW input power, making it ideal for RF/Microwave applications requiring precise signal control in temperatures from -40 to 90°C.
Median Price
$2.825
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Arrow
1+ parts
$4.160
100+ parts
-
1k+ parts
$1.490
10k+ parts
$0.990
Verical
Nova Conductors
$1.320
Vyrian
Chip Stock
Sensible Micro Corp
Continental Prestige Electronics
$1.294
Argo Parts USA
Netroflash
Advanced Electronics
$1.346
Aztec Data Supply Inc.
$1.640
Corohmni
$2.965
S.R.D Solutions
Authorized Procurement Solutions
Lixinc
GreenTree Electronics
Perfect Parts
With a high maximum input power, this attenuator can handle strong signals without getting damaged, ensuring reliability and longevity.
The high attenuation value allows for precise control over signal levels, making this attenuator suitable for a variety of applications that require accurate signal adjustments.
The component-based construction of this attenuator ensures high quality and performance, making it a reliable choice for RF and microwave applications.
With a high maximum operating temperature, this attenuator can handle demanding environments and extended usage without overheating, ensuring consistent performance.
The wide temperature range at which this attenuator can operate makes it versatile and suitable for various temperature conditions, adding to its flexibility.
The matte tin finish on the terminals provides good conductivity and corrosion resistance, contributing to the overall durability and performance of the attenuator.
With low insertion loss, this attenuator minimizes signal degradation, ensuring that the signal passing through it remains strong and intact.
As a variable attenuator, this product offers adjustable attenuation levels, providing flexibility in signal control and making it a versatile choice for different applications.
The 50 ohm characteristic impedance matches common RF systems, ensuring seamless integration and optimal signal transfer, making this attenuator compatible with a wide range of equipment.
With a starting frequency of 0 MHz, this attenuator can handle a wide range of frequencies, making it suitable for a variety of RF and microwave applications.
The high maximum operating frequency allows this attenuator to handle microwave signals with precision and accuracy, making it ideal for high-frequency applications.
RF/Microwave Attenuators HMC624LP4ETR attributes and parameters. Explore more RF/Microwave Attenuators devices from Hittite Microwave
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
International Semiconductor
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
EU2B-YS303C
Idec
ROTARY SWITCH;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
HMC941
Analog Devices
HMC941 by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 4.8 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal control in the frequency range of 100 MHz to 30 GHz.
HMC470ATCPZ-EP-PT
Analog Devices' HMC470ATCPZ-EP-PT is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 3 GHz.
AT65-0107TR
M/a-com Technology Solutions
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
19-7-2
Cobham Plc
19-7-2 by Cobham Plc is a fixed attenuator with 7 dB nominal attenuation, handling up to 30 dBm CW input power. With a VSWR of 1.35, it operates in the RF/Microwave range from 0-18000 MHz. Constructed coaxially, it's ideal for applications requiring precise signal attenuation in various temperature conditions.
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Nominal Attenuation: 31.5 dB; Additional Features: TTL COMPATIBLE; Maximum Input Power (CW): 33.98 dBm;
HMC470LP3ETR
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
32-10
Api Technologies
FIXED ATTENUATOR; Additional Features: SMA, HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
HMC712LP3CERTR
Analog Devices' HMC712LP3CERTR is a GAAS RF/Microwave Attenuator with 16 terminals. It operates b/w -40°C to 85°C, suitable for surface mount applications. The package body material is plastic/epoxy, making it versatile for various electronic designs.
3007-4
3007-4 by Cobham Plc is a COAXIAL RF/Microwave Attenuator with 4 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.3 Max VSWR. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-2500 MHz. Operating temperatures range from -40°C to 65°C.
Analog Devices' HMC470LP3ETR is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 2 dB Max Insertion Loss. It operates from -40 to 85°C, has a GaAs technology, and is suitable for variable attenuation in RF/microwave applications up to 3 GHz.
32-9.5
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD;
M3933/25-36N
Vertiv
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 12400 MHz; Additional Features: SMA; Construction: COAXIAL; Nominal Attenuation: 36 dB;
6A-40
Aeroflex/inmet
FIXED ATTENUATOR; Minimum Operating Temperature: -65 Cel; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Temperature: 125 Cel; Nominal Attenuation: 40 dB; Maximum Voltage Standing Wave Ratio: 1.2;
87-30
Aeroflex/weinschel
FIXED ATTENUATOR; Terminal Finish: Gold (Au); Maximum Voltage Standing Wave Ratio: 1.25; JESD-609 Code: e4; Nominal Attenuation: 30 dB; Maximum Operating Temperature: 100 Cel;
6A-10
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=250W; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
44
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Input Power (CW): 36.99 dBm;
HMC470LP3RTR
Analog Devices' HMC470LP3RTR is a GAAS RF/Microwave Attenuator with 16 terminals, operating b/w -40°C to 85°C. It has a 5V power supply and surface mounting feature. Ideal for applications requiring precise signal attenuation in temperature-sensitive environments.
FIXED ATTENUATOR; Construction: COAXIAL; Additional Features: SMA; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Frequency: 18000 MHz;
F2258NLGK8
Renesas Electronics
VARIABLE ATTENUATOR; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
44-8
44-8 by Cobham Plc is a RF/Microwave Attenuator with a max input power of 36.99 dBm, max VSWR of 1.25, and nominal attenuation of 8 dB. It is constructed coaxially and has a temperature range from -50 to 85 °C. This fixed attenuator operates within a frequency range of 0-18000 MHz and is suitable for applications requiring precise signal attenuation in RF/microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC624ALP4ETR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC655LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Package Equivalence Code: SOLCC6,.08,25;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Package Equivalence Code: SOLCC6,.08,25;
HMC658LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Nominal Attenuation: 20 dB; Maximum Input Power (CW): 25 dBm;
Analog Devices' HMC658LP2E is a 20 dB fixed attenuator with 25 dBm CW input power, ideal for RF applications. Constructed with plastic/epoxy, it has a characteristic impedance of 50 ohm and operates from -40 to 85°C. Suitable for surface mount installations, it covers frequencies from 0 to 25 GHz.
HMC652LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HMC655LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Terminal Finish: Tin (Sn);
HMC658LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - annealed;
HMC656LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 0 MHz;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
HMC629ALP4ETR
HMC629ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 45 dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and operates from -40 to 85°C. It is a variable attenuator suitable for applications requiring precise signal control in the frequency range of 0-10 GHz.
HMC653LP2ETR
HMC653LP2ETR by Analog Devices is a surface mount RF/microwave attenuator with 6 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This fixed attenuator is commonly used in applications requiring precise signal attenuation.
HMC629LP4ERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC624ACPSZ-EP-RL7
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 105 Cel;
HMC629LP4ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC624LP4
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved