Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Construction: COAXIAL; Maximum Operating Temperature: 100 Cel; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W;
Median Price
$1.051
Lifecycle Status
Suppliers In-Stock
65
In-Stock Inventory
1k+
Avnet
1+ parts
$0.816
100+ parts
-
1k+ parts
10k+ parts
Sager
$0.857
$0.743
Powell Electronics
$0.977
$0.699
Interstate Connecting
$1.028
$0.837
$0.814
Heilind Electronics
$0.844
$0.831
Arrow
$1.100
$0.732
$0.714
$0.707
Mouser Electronics
$1.250
$0.985
$0.824
$0.804
Element14
$1.290
$1.029
$0.865
$0.812
Distrelec
$1.365
$0.950
Conrad
$1.409
$1.245
Newark
$1.420
$1.200
$0.993
$0.992
DigiKey
$1.530
$1.108
$0.942
$0.872
RS Americas
$1.560
$1.230
$1.090
RS (Exports)
$1.640
$1.400
$1.300
TE Connectivity
$2.040
$1.830
$1.680
Adafruit Industries
$2.599
$2.469
RFMW
$1,728.920
Verical
$0.733
Future Electronics
$0.735
$0.710
$0.680
TTI
$0.780
$0.760
$0.728
TTI Europe
$0.794
$0.762
PEI Genesis
Chip1Stop
$0.852
Farnell
$0.705
$0.654
Master Electronics
$1.023
$0.678
$0.653
Bürklin Elektronik
$0.358
$0.337
BTC Electronics
Hutch & Son
$0.550
DF Sales Co.
$0.600
Nova Conductors
$0.758
TME
$1.160
$0.870
$0.860
Electro Enterprises
$1.270
$0.907
FDH Electronics
$1.484
$1.349
$1.142
$1.060
IBS Electronics
$1.031
$0.884
$0.792
NAC Semi
$1.450
Bristol Electronics
Electro Sonic
$1.025
$0.674
$0.660
Vyrian
Rapid Electronics
$0.910
VNN
Kallista Electronics Ltd
Prism Electronics
Lakeview Electronics
R&J Components
EMSNET
LIBRA Elektronik GmbH
J & M Industries LLC
ACDS - Activité Composants Distribution Service
Dark Horse Electronics
Vicor Industries, Inc.
ComSIT Distribution GmbH
Extreme Components
Microwave Components, LLC
American Connector Supply Corp
Sunrise Surplus Inc.
QIE Inc.
Electronic Expediters
Resion
Hawk Electronics
$0.420
Bisco
Masline Electronics Inc.
Van Brakel Electronic
North Shore Components
Defense Contract Solutions
Ampacity Inc.
$0.304
Semicontronic
$0.296
$0.295
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.110
$0.620
CoreStaff
$1.505
$0.616
$0.569
Modulus Dynamics
$2.597
Perfect Parts
Abacus Technologies
Assy Fe
Benley Electronics
Authorized Procurement Solutions
Glotronic Ltd.
EMSNET (Excess)
Robosynatics
$4.615
$4.521
Kepictronics
Pacific Micro-Tech
Cyclops Electronics Ltd (Excess)
RF/Microwave Attenuators 66-10-34 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitachi
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Lite-on Semiconductor
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Cheng-yi Electronic
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Central Semiconductor
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
19-9-1
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; Additional Features: SMP-M, I/P POWER-MAX(PEAK)=250W; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm;
PAT1220-C-8DB-T5
Susumu
The Susumu PAT1220-C-8DB-T5 is a 50 ohm fixed attenuator with 8 dB nominal attenuation, handling up to 20 dBm CW power. With a VSWR of 1.3, it operates from -55°C to 125°C and covers frequencies from 0 MHz to 10 GHz. Ideal for RF/microwave applications requiring precise signal control in various temperature conditions.
A-0805-C-00DB
International Manufacturing Services
A-0805-C-00DB by International Manufacturing Services is a RF/Microwave Attenuator with 20 dBm CW power, 1.3 VSWR, and 0 dB nominal attenuation. It operates b/w -55°C to 125°C, suitable for fixed attenuator applications in the frequency range of 0-10000 MHz.
HMC657LP2ETR
Analog Devices
Analog Devices' HMC657LP2ETR is a fixed attenuator with 6 terminals, operating b/w -40 °C to 85°C. Made of plastic/epoxy, it's designed for RF/microwave applications. Its surface mount feature makes it ideal for temperature-sensitive environments.
66-10-44
Api Technologies
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.9; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 100 Cel; Additional Features: N-M, I/P POWER-MAX(PEAK)=1000W; Construction: COAXIAL;
HMC473MS8
Analog Devices' HMC473MS8 is a RF attenuator with 29 dB nominal attenuation and 3.5 dB max insertion loss. It operates b/w 450 MHz to 2200 MHz, ideal for RF/microwave applications requiring precise signal control in components like amplifiers or transceivers.
779-5
L-3 Narda-miteq
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=200W; Nominal Attenuation: 5 dB; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.4;
41
Cobham Plc
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Input Power (CW): 40 dBm; Minimum Operating Frequency: 0 MHz;
32-13
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Construction: COAXIAL; Additional Features: SMA, HIGH RELIABILITY; Nominal Attenuation: 13 dB; Terminal Finish: Gold (Au);
86-10-66
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 22000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
1-1
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
32-7
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm; Construction: COAXIAL; JESD-609 Code: e4; Minimum Operating Frequency: 0 MHz;
3014-120
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz;
M3933/25-62N
Cinch Connectivity Solutions
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=500W; Minimum Operating Temperature: -55 Cel;
796
VARIABLE ATTENUATOR; Maximum Insertion Loss: 1 dB; Construction: COAXIAL; Maximum Operating Frequency: 4000 MHz; Nominal Attenuation: 20 dB; Minimum Operating Frequency: 2000 MHz;
54-10
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 10 dB; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 40000 MHz;
HMC109
RF/Microwave Attenuators; Technology: GAAS; Maximum Operating Temperature: 125 Cel; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: -55 Cel; Power Supplies (V): -7;
AT65-0107TR
TE Connectivity's AT65-0107TR is a RF/Microwave Attenuator with 24 terminals. It operates at -40 to 85°C, powered by 5V and -5/-8V supplies. Utilizes GaAs technology for surface mount applications in plastic/epoxy packages.
AT0603T02ECAS3
American Technical Ceramics
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Technology: AIN; Screening Level: MIL-STD-883; Maximum Voltage Standing Wave Ratio: 1.25;
4205
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Construction: COAXIAL; Terminal Finish: Gold (Au); Additional Features: SMA-F; SMA-M; Nominal Attenuation: 5 dB; Minimum Operating Temperature: -55 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
66-10-34
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Temperature: 100 Cel; Terminal Finish: Gold (Au); Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz;
66-10-34 by Cobham Plc is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.9, and attenuation of 10 dB. Ideal for applications requiring fixed attenuators in the frequency range of 0-18000 MHz, with characteristic impedance of 50 ohm.
66-10-14
Cobham Plc's 66-10-14 is a RF fixed attenuator with 10 dB nominal attenuation, 1.9 max VSWR, and 51.76 dBm CW input power. Constructed coaxially for durability, it operates b/w -55°C to 100°C. Ideal for applications requiring precise signal attenuation in the frequency range of 0-18000 MHz.
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.9;
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Voltage Standing Wave Ratio: 1.9; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Construction: COAXIAL;
66-10-13
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Additional Features: 3.5 MM-F; N-F, I/P POWER-MAX(PEAK)=1000W; Terminal Finish: Gold (Au);
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
Cobham Plc's 66-10-13 is a RF fixed attenuator with 10 dB nominal attenuation, handling up to 51.76 dBm CW power and supporting frequencies from 0 to 18000 MHz. Constructed coaxially with a VSWR of 1.9, it operates b/w -55°C to 100°C, making it ideal for panel mount applications requiring precise signal control.
66-10-33
FIXED ATTENUATOR; Additional Features: N-F, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 10 dB; Minimum Operating Frequency: 0 MHz;
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; Terminal Finish: GOLD; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e4; Additional Features: N-F, I/P POWER-MAX(PEAK)=1000W;
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.9; Nominal Attenuation: 10 dB; Maximum Input Power (CW): 51.76 dBm; Minimum Operating Temperature: -55 Cel;
FIXED ATTENUATOR; Maximum Input Power (CW): 51.76 dBm; Nominal Attenuation: 10 dB; JESD-609 Code: e4; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.9;
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 51.76 dBm; Maximum Voltage Standing Wave Ratio: 1.9;
66-10-31
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Input Power (CW): 51.76 dBm; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.9; Maximum Operating Frequency: 18000 MHz;
66-10-31 by Cobham Plc is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.9, and attenuation of 10 dB. It operates in the frequency range from 0 to 18000 MHz, ideal for applications requiring precise signal attenuation in high-frequency environments. The attenuator features a coaxial construction, gold terminal finish, and panel mount for easy installation.
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.9; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz;
66-10-24
The Cobham Plc 66-10-24 is a RF fixed attenuator with 10 dB nominal attenuation, 1.9 max VSWR, and 51.76 dBm CW input power. Constructed coaxially for durability, it operates b/w -55°C to 100°C and supports frequencies from 0 MHz to 18 GHz. Ideal for panel mounting in RF/Microwave applications requiring precise signal control.
66-10-23
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 10 dB; Minimum Operating Frequency: 0 MHz; Terminal Finish: Gold (Au);
66-10-12
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Input Power (CW): 51.76 dBm; Characteristic Impedance: 50 ohm; Terminal Finish: Gold (Au); Nominal Attenuation: 10 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved